PTE-300
Pan/Tilt Ethernet Camera Control Head

- Precision Broadcast Quality Movement
- Versatile Ethernet Interface

The newest camera control head in the AMX PosiTrack Pan/Tilt series capably controls camera lens zoom, focus and iris features with the highest level of broadcast quality precision. It will significantly reduce installation time for AMX dealers because a separate control network is no longer required.

The PTE-300 uses gears rather than pulleys to pan and tilt the camera, which provides very smooth operation and it's compatible with VisualArchitect so you can implement it into any AMX system design.

• Ethernet Versatility
Supporting AMX’s commitment to standards-based technologies, the PTE-300 features an Ethernet control interface offering more installation flexibility, increased distances to the master controller and no proprietary cable runs.

• Slow Speed Precision Movement / Accurate Preset
Recalls This head steps up to the plate with precise, slow
speed movements and accurate camera angle preset
recalls. No matter where you need the camera to be, or
how slow you need it to move, you can count on precision
accuracy every time.

• Carries the Load
The PTE-300 can support larger cameras weighing up to 30 pounds, yet shares the same small form factor of control heads capable of supporting 15 pounds or less.

• Dynamic Device Discovery Protocol Inside
With DDDP technology built-in, the AMX NetLinx Controller
recognizes the PTE-300 immediately, making the device
easily identifiable on the network for quick configuration.

Availability
The PTE-300 will be available within 90 days.

Read the full PTE-300 announcement.