|
New DGX Fiber Transmitters and Receivers
Get all the security, clarity and distance benefits of signal distribution over fiber without any of the hassle. The new AutoPatch DGX line is specifically designed for use with a single strand of multimode fiber, and if you are new to fiber it’s the most common, easily terminated and installed cable solution. Now you too can send true, pure, uncompressed DVI, RGHV, audio and control 3,000 feet and beyond in any environment.
Auto-detect on the Transmitters and SmartScale™ on the Receivers ensure quick or no set-up time by automatically recognizing any device’s supported resolution and signal style parameters. Now you can switch out visiting PCs and replacement LCDs without manual setup.
Epica DGX DVI Fiber Transmitter and Receiver front image
(click for larger image)
Epica DGX DVI Fiber Transmitter and Receiver rear image
(click for larger image)
-
Send video, audio and control over a single strand of multimode fiber cable with SC connectors
-
Transmit high-resolution, uncompressed DVI or RGBHV 3,000 feet at resolutions up to 1920x1200 @ 60Hz; with embedded analog or digital audio
-
SmartScale™ Technology on each DGX Fiber RX automatically responds to the display’s declared EDID information and sends the best resolution and video parameters for that display
-
DGX HD-15 TX features auto detection on the HD-15 input; so manual setup is not required to adjust for various video input parameters
-
DGX HD-15 TX will accept various analog input styles including RGBHV, RGBS, Component/HDTV
-
Compact size with versatile mounting options including rack, surface or pole
-
Common signal transport layer transcodes between analog and digital video and analog and digital audio freely; this allows the DGX HD-15 TX to be used with the DGX DVI RX and the DGX DVI TX to be used with the DGX HD-15 RX
DGX DVI TX
- AVB-TX-DGX-DVI-SC FIBER (FG1010-210-01)
DGX DVI RX
- AVB-RX-DGX-SC FIBER-DVI (FG1010-410-01)
DGX HD-15 TX
- AVB-TX-DGX-HD15-SC FIBER (FG1010-200-01)
DGX HD-15 RX
- AVB-RX-DGX-SC FIBER-HD15 (FG1010-400-01)
Availability
We expect to fulfill initial orders for the DGX Fiber Transmitters and Receivers approximately late September 2009.
|
