
HELPFUL HINT
InstaGate Pro provides for true, non-limited matrix switching from any HDCP source device to any or all connected destination devices
WATCH THE VIDEO
Get an inside look at the features and technical capabilities of the all new Enova DGX family of Digital Media Switchers that include an integrated NetLinx Controller, embedded Ethernet switch, and can be populated with Enova DGX video input and output boards in addition to optional audio insert/extract boards.
TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
SPOTLIGHT: Enova
A new, innovative philosophy on how you think about A/V technology: Enova is part of an evolution to collaborate, communicate and
educate using AV technology. Visit www.amx.com/enova/ to learn more.
AWARD WINNING PRODUCTS
Best New Product at InfoComm 2011: AMX's Enova DGX
The Enova converts analog and digital video and control, which runs through a 16x16 or 32x32 Enova Digital Media Switcher. The switcher also includes a gigabit Ethernet switch that's fully integrated. You get digital media, control and data on a single Cat5 cable. Here's the rAVe NOW video we shot at InfoComm.
InstaGate Pro Technology
No tools, no delays and no key constraints. AMX's exclusive InstaGate Pro Technology allows traditionally key limited sources to be freely switched to any display without the typical HDCP delays.
AVS-ENOVADGX32-VI-DVI Enova DGX DVI Input Board
PDF | 256 KB
Instruction Manual - Enova DGX 16, Enova DGX 32 Digital Media Switchers
PDF | 15.03 MB
| Rev. D
Quick Start Guide - Enova DGX 16, Enova DGX 32 Digital Media Switchers
PDF | 616 KB
| Rev. C
2012 Spring Pocket Guide (Commercial/Residential)
PDF | 25.6 MB

Tech Mgrs Guide to IP-Based AV Control
PDF | 2.83 MB
AVS-ENOVADGX32-VI-DVI - Left
PNG | 2.16 MB
OVERVIEW
The AVS-ENOVADGX32-VI-DVI is an HDCP compliant DVI input board for the Enova DGX 16 and Enova DGX 32. It has four DVI connections per board and supports HDMI, DisplayPort or DVI signals.
COMMON APPLICATIONS
The Enova DGX DVI Input Board is ideal for applications where source devices are located within 15 meters of the Enova DGX Digital Media Switcher, allowing direct digital inputs into the system and eliminating the need for external transmitters.
FEATURES
SPECIFICATIONS EDID - FACTORY LOADED* Standard Timing Identification: Established Timing: ^ Cable distance support dependent on cable type and signal format. *The default EDID can be overwritten to include a broad range of features, including HDMI mode, based on installation requirements **This is the preferred timing identified in the EDID Note: Specifications are subject to change.
HDMI (With DVI Cable Adapter)
DisplayPort ++ (Input Only, With DVI Cable Adapter)
EDID is user re-programmable
Key Management System
AMX HDCP InstaGate Pro Technology
Key support up to 16 devices per output, independent of source device
(DVI-D Single Link is the supported signal type)
TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.