DVI/Fiber Modules

Digital Generation

Description
Transmitter, DVI to Fiber Module
Model--
Part # --
DVI | Fiber
Digital Generation
Video
This Product Has Been Replaced By: V Style Digital Generation DVI/Fiber Modules

OVERVIEW
The Digital Generation DVI to Fiber Transmitters and Receivers transmit three unique uncompressed DVI signals up to 3,000 feet over a 12 fiber multimode MTP cable, without signal degradation or manipulation, to either an Epica DG MTP Fiber Board or directly to the receiver. Compatible with all AutoPatch Digital Generation products.

GENERAL

  • Power Consumption (Max): 12 V - 24 V DC, 14 W
  • BTU/HR (Max): 48
  • Power Connector: 2.1 mm DC Power Jack
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Humidity: 0 to 90% non-condensing
  • Dimensions (Without Feet):
    • 1.42" x 5.82" x 5.22"
    • 3.61 cm x 14.78 cm x 13.26 cm
  • Weight: Appx. 1.5 lbs (.068 kg)
  • Fiber Cable Types:
    • 12 Fiber Multimode MTP
    • 50/125 um or 62.5/125 um
  • Approvals: CE

DVI-MTP FIBER

  • Compatible AutoPatch Fiber Modules:
    • DVI - MTP Fiber
    • RGBHV - MTP Fiber
    • Other AMX AutoPatch MTP Fiber products
  • Resolution Support: Up to 1920x1200 @ 60Hz refresh rate with reduced blanking
  • Pixel Bandwidth (Bit Rate): 1.65 Gbps
  • Specification Compliant: DVI 1.0, DVI-D (Single Link DVI)
  • Input Cable Equalization: up to 50 ft
  • Output Reclocking: Yes
  • DDC/EDID Support:
    • EDID Resolutions Provided by the DVI Transmitter Module
    • 1920x1200*, 1920x1080*, 1680x1050
    • 1600x1200, 1280x1024, 1280x768
    • 1280x720, 1152x864, 1024x768
    • 800x600, 640x480
  • Fiber Cable Length: **Up to 3000 ft
  • Fiber Connector (on AutoPatch Module): Male MTP (guide pins define it as male)
  • Fiber Cable Termination: Female MTP
  • HDCP Support: No
  • DVI Connector: DVI-I (DVI-D is the supported signal type)

*Reduced Sync Blanking.

**3000 ft. cable requires low loss, controlled skew fiber cable. For cable recommendations contact AutoPatch.

GENERAL

  • Power Consumption (Max): 12 V - 24 V DC, 14 W
  • BTU/HR (Max): 48
  • Power Connector: 2.1 mm DC Power Jack
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Humidity: 0 to 90% non-condensing
  • Dimensions (Without Feet):
    • 1.42" x 5.82" x 5.22"
    • 3.61 cm x 14.78 cm x 13.26 cm
  • Weight: Appx. 1.5 lbs (.068 kg)
  • Fiber Cable Types:
    • 12 Fiber Multimode MTP
    • 50/125 um or 62.5/125 um
  • Approvals: CE

DVI-MTP FIBER

  • Compatible AutoPatch Fiber Modules:
    • DVI - MTP Fiber
    • RGBHV - MTP Fiber
    • Other AMX AutoPatch MTP Fiber products
  • Resolution Support: Up to 1920x1200 @ 60Hz refresh rate with reduced blanking
  • Pixel Bandwidth (Bit Rate): 1.65 Gbps
  • Specification Compliant: DVI 1.0, DVI-D (Single Link DVI)
  • Input Cable Equalization: up to 50 ft
  • Output Reclocking: Yes
  • DDC/EDID Support:
    • EDID Resolutions Provided by the DVI Transmitter Module
    • 1920x1200*, 1920x1080*, 1680x1050
    • 1600x1200, 1280x1024, 1280x768
    • 1280x720, 1152x864, 1024x768
    • 800x600, 640x480
  • Fiber Cable Length: **Up to 3000 ft
  • Fiber Connector (on AutoPatch Module): Male MTP (guide pins define it as male)
  • Fiber Cable Termination: Female MTP
  • HDCP Support: No
  • DVI Connector: DVI-I (DVI-D is the supported signal type)

*Reduced Sync Blanking.

**3000 ft. cable requires low loss, controlled skew fiber cable. For cable recommendations contact AutoPatch.



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


Feedback | Gear Store | Site Map | Terms & Conditions | Warranty