ICSLan Serial Interface, 2 Ports

DescriptionICSLan Serial Interface, 2 Ports
Part #FG2100-22

Revit BIM

This product is part of the Autodesk Revit database and can be specified in designs for Building Information Modeling (BIM). Click here to download the associated Revit .rfa file from the Autodesk SEEK Web site. It is also searchable under 'AMX' in any Autodesk application."

ICSLan Device Control Boxes allow users to manage devices remotely from a Controller over an Ethernet network. This provides a beautifully simple method for a centralized control environment allowing users to share a controller among multiple smaller rooms versus controllers in every room. Ethernet has become the industry standard for connecting devices and the ICSLan Device Control Boxes make it easy to introduce control to equipment such as projectors located extended distances from a Controller. Additionally, the number of ports on an AMX Controller can be expanded when all ports are fully populated. Because they employ Native NetLinx technology, it is extremely simple to add an EXB to an AMX installation.

Conference rooms, classroom or auditoriums where a single controller is used to manage multiple devices such as projectors spread throughout a facility or to add additional ports to an AMX Central Controller.


  • Enable Ports over Ethernet – Provides a future proof solution to add ports anywhere
  • Easy to Program – Programming is identical to any other device ports on the Controller
  • Power over Ethernet – Eliminate the need for a power source at the install location
  • Small Form Factor – Compact design makes it easy to hide for a clean installation
  • NetLinx Studio Tools – Configuration tools make ICSLan Device Control Boxes easy to deploy


  • Standard, Ethernet-Based Interface – Familiar installation methodology using standard switches rather than proprietary distribution hardware
  • Easy to Program – Programming is identical to any other device port on the Controller
  • Easy to Install - Compact size, Power over Ethernet and compatible with any AMX Central Controller


  • Control Any Device – Provides the ability to control devices that may be far from a controller
  • Cost Effective Solution for Smaller Rooms – Leverage the power of a single central controller across multiple rooms
  • Out of Sight - Compact design makes it easy to hide for a clean, elegant look



  • 1" x 4 3/8" x 5 1/8" (2.5 cm cm x 11.1 cm x 13.00 cm)
  • RU: 1

1 lb (454 g)


  • PoE Powered - No local Power Supply needed
  • Power draw: 1.9 Watts


  • One RS-232/422/485 control port, supports XON/XOFF, CTS/RTS, 300 - 115.2K Baud
  • One RS-232 control port, supports CTS/RTS, 300 - 115.2K Baud


  • 1 Green LED shows connection and power status
  • 1 Green LED shows Ethernet Link status and activity
  • 2 Red LEDs (1 per COM port) show serial transmit (TX) data activity
  • 2 Yellow LEDs (1 per COM port) show serial receive (RX) data activity


  • 1 RJ-45 ICS-LAN Ethernet Connector
  • 1 10-Pin 3.5mm captive-screw terminal (RS-232/422/485 port)
  • 1 5-Pin 3.5mm captive-screw terminal (RS-232 port)


  • FCC Part 15 Class B
  • CE EN 55022
  • CE EN 55024
  • CE EN 60950-1
  • IEC 60950-1
  • C-Tick CISPR 22 Class B
  • VCCI CISPR 22 Class B
  • UL 60950-1

Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.

NXA-ENET8-2POE Gigabit Ethernet Switch (FG2178-63)
PS-POE-AF PoE Injector (Discontinued) (FG423-80)
PS-POE-AF-TC PoE Injector, 802.3AF Compliant (FG423-83)
AVB-VSTYLE-SURFACE-MNT V Style Module Surface Mount (FG1010-722)
AVB-VSTYLE-RMK-1U V Style Module Tray, 5 1/4" Depth (FG1010-720)
AVB-VSTYLE-RMK-FILL-1U V Style Module Tray w/ fill plates, 5 1/4" Depth (FG1010-721)
AVB-VSTYLE-POLE-MNT V Style Module Pole Mount (FG1010-723)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty