GENERAL

• AC Power: 110 - 220 VAC single phase, 50-60 Hz
• Power Consumption (Max): 600 Watts per loaded enclosure
• Power Consumption (Typ): 470 Watts per loaded enclosure
• BTU/HR (Max): 2047
• BTU/HR (Typ): 1604, fully loaded enclosure
• Operational Temperature: 32° to 110° F (0° to 43° C)
• Humidity: 0 to 90% non-condensing
• Approvals: CE, ETL/cETL

128 ENCLOSURE

• Dimensions (With Mounting Ears):
• 28" x 19" x 25"
• 71.12 cm x 48.26 cm x 63.50 cm
• Dimensions (Without Mounting Ears):
• 28" x 17.5" x 25"
• 71.12 cm x 44.45 cm x 63.50 cm
• RU: 16
• Weight: Appx. 140 lbs per loaded enclosure (63.5 kg)

256 ENCLOSURE

• Dimensions (With Mounting Ears):
• 43.75" x 19" x 25"
• 113.13 cm x 48.26 cm x 63.50 cm
• Dimensions (Without Mounting Ears):
• 43.75" x 17.5" x 25"
• 113.13 cm x 44.45 cm x 63.50 cm
• RU: 25
• Weight: Appx. 170 lbs per loaded enclosure (77.1 kg)

I/O RANGE

• 16x16 through 256x256 (Increments of 16 inputs and/or outputs)

SIGNAL TYPES

• Composite, S-video, Y/c
• HDTV, Y/Pb/Pr, YUV
• RGB, RGsB, RGBS, RGBHV
• Mono audio, Stereo audio
• S/PDIF, AES 75 Ohm, Note: S/PDIF and AES 75 Ohm routed over standard video boards.

STANDARD AUDIO

• Input Level (Max):
• +26 dBu, balanced, no volume control
• +22 dBu, balanced, with volume control
• Input Impedance: 18 kOhms
• Output Level (Max):
• +26 dBu, balanced, no volume control
• +22 dBu, balanced, with volume control
• Output Impedance: 50 Ohms
• Frequency Response: < ± 0.1 dB (20 Hz to 20 kHz)
• THD + Noise:
• < 0.03% (20 Hz to 20 kHz, Vin = -6 dBu to +26 dBu, no volume control)
• < 0.02% (20 Hz to 20 kHz, Vin = 0 to +26 dBu), no volume control)
• < 0.03% (20 Hz to 20 kHz, Vin = -10 dBu to +22 dBu, with volume control)
• Signal to Noise Ratio: > 110 dB (20 Hz to 20 kHz, Vin = +20 dBu)
• Crosstalk: < -95 dB (1 kHz, Vin = +20 dBu)
• Output Gain Adj. Range: +6 dB to -6 dB, via potentiometer
• Input Gain Adj. Range: +10 dB to -70 dB (mute), via software
• Output Volume Adj. Range: +10 dB to -70 dB (mute), via software
• Connectors: 3T

STANDARD VIDEO

• Input Level (Max): ± 5 Volts
• Input Impedance: 75 Ohms
• Output Level (Max): ± 5 Volts
• Output Impedance: 75 Ohms
• Frequency Response: 10 MHz or better (± 3 dB)
• Crosstalk: < -50 dB (f = 5 MHz)
• Differential Gain: < 0.3% or better (f = 3.58 MHz)
• Differential Phase: < 0.3° or better (f = 3.58 MHz)
• Signal to Noise Ratio: > 60 dB (Vin = 0.7V, 100 IRE)
• Connectors: BNC

WIDEBAND VIDEO

• Input Level (Max): ± 1 Volt
• Input Impedance: 75 Ohms
• Output Level (Max): ± 1 Volt
• Output Impedance: 75 Ohms
• Frequency Response: 300 MHz or better (± 3 dB)
• Crosstalk:
• < -60 dB (f = 5 MHz)
• < -30 dB (f = 150 MHz)
• Connectors: BNC

SYNC

• Input Level (Max): + 5.5 Volts
• Input Impedance: 22 kOhms
• Output Level (Max): + 5.5 Volts
• Output Impedance: 75 Ohms
• In/Out Polarity: Active High or Low (output follows input polarity)
• Output Signal Level: Unity Gain
• Connectors: BNC

AMX University Training is available for this product. Applicable courses include:

• Signal Management Essentials Online Training
• Getting Started with AutoPatch Online Training
• Signal Management Design

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.