IRIS

IR/Serial Data Capture Device

DescriptionIR/Serial Data Capture Device
Part #FG5448

QUICK TIP
Use the IR Capture and Management tool in AMX's VisualArchitect software application to capture and manage IR functions via the IRIS. Refer to the VisualArchitect Instruction Manual and online help for details.

D-Tools Certified Product

This product can be found in the D-Tools manufacturer product database and specified as a third party device when building and proposing a system using D-Tools System Integrator software. D-Tools data includes attributes that make it easier to sell, design, and install systems including: overview, specifications, images, product documentation and more. AMX is a member of the D-Tools Manufacturer Vantage Point (MVP) program designed to provide D-Tools customers the most up-to-date product information.

COUNTRY OF ORIGIN: UNITED STATES

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

OVERVIEW
As a stand-alone self-contained unit, the IRIS captures IR or wired function signals from a hand controller and instantly captures and verifies the control functions, where they are transmitted to a PC operating the IRLIB program. Designed with versatility in mind, the IRIS captures IR functions from hand controllers for a wide variety of audiovisual equipment such as monitors, VCRs, TVs, and CD players.

FEATURES

  • Large, 2-digit status LED display
  • Configurable RS-232 port baud rate (300-9,600 baud)
  • 12 VAC power supply
  • IREdit software

SPECIFICATIONS

DIMENSIONS (HWD)

  • 1 1/2" x 5 1/2" x 5 1/2" (3.8 cm x 14 cm x 14 cm)
  • RU: 1

WEIGHT
1.8 lbs (518.2 g)

POWER REQUIREMENT
12 VDC at 160 mA max

ENCLOSURE
Metal with black matte finish)

CONTROL PORTS

  • IR sensor to receive IR codes
  • IR serial input for wired IR codes
  • DB-9 female connector for Axcess and PC communication

FRONT PANEL COMPONENTS

  • Signal LED: Red indicator that blinks when the IRIS unit is receiving HC functions
  • IR window: Captures HC functions
  • Ready LED: Green indicator that lights when the IRIS unit is ready to receive HC functions
  • Verify: Red indicator that lights when the IRIS unit is ready to verify HC functions
  • Alphanumeric display: (2-digit) Red 7-segment alphanumeric display that shows the capture mode and operating status
  • Up: Increments the alphanumeric display by one and lights the red LED inside the pushbutton
  • Down: Decrements the display by one and lights the red LED inside the pushbutton
  • Send: Transmits captured HC functions to a PC running the IREdit software program. The red LED inside the pushbutton lights when valid HC functions are ready to send

REAR PANEL COMPONENTS

  • 12 VDC/12 VAC connector: 2-pin (male) 12 VDC or 12 VAC power supply connector
  • 8-pin data connector: Captures wired-IR HC functions. Connect the HC to the IRE IN or WIRED IN pins
  • RS-232 connectors:
    - DB-9 connector for data communications with a PC
    - 6-pin RJ-11 modular connector for data communications. The RJ-11 connector is only used with older SX-DCU+ products



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


Feedback | Gear Store | Site Map | Terms & Conditions | Warranty