SPECIFICATIONS

DIMENSIONS (HWD)

• 1 1/2” x 5 1/2” x 6 15/16” (3.9 cm x 14.1 cm x 17.7 cm)
• RU: 1

WEIGHT: 2.02 lbs (920 g)

POWER REQUIREMENTS

• 500mA @ 12VDC (6W)
• Optional 12VDC power input overrides PoE when used
• Power requirements are usage dependant
• Power Over Ethernet (PoE) is available
• This product is intended to be supplied by a Listed external power supply rated from 10 to 18 VDC, minimum 500 mA or equivalent

ENCLOSURE: Metal with black matte finish

CERTIFICATIONS: FCC Part 15 Class B, CE, and UL listed

VIDEO INPUTS

• Composite Video (via BNC)
• S-Video (via female S-Video connector)

AUDIO INPUTS

• Analog Stereo RCA connectors
• Microphone (1/8” stereo)

SUPPORTED RESOLUTIONS

• NTSC (480i)
• PAL (576i)

SUPPORTED VIDEO CODECS

• MPEG-2 (2 Mbps - 6 Mbps)
• MPEG-4 (500Kbps - 3 Mbps)
• Adjustable Bit Rate: up to 6 Mbps

SUPPORTED AUDIO CODECS

• MPEG Audio Level 2 (MP2)
• MPEG Audio Level 3 (MP3)

FRONT PANEL COMPONENTS

• ID Pushbutton: Used to set the NetLinx ID (Device only) assignment, and reset the unit to factory defaults
• Status LED: Green LED blinks to indicate both the system and communication status with the target Master
• LCD Display: Provides system information such as the currently used IP Address
• IR Receiver: Receives 38KHz AMX IR codes

REAR PANEL COMPONENTS

• COMPOSITE IN: BNC connector (female) supports Composite Video Input (NTSC/PAL)
• 12VDC PWR: 2-pin 3.5mm mini-Phoenix (male) captive-wire connector from an optional 12 VDC power supply (overrides PoE)
• S-VIDEO IN: Mini-Din4 port for composite S-Video input
• ETHERNET 10/100: RJ-45 port provides 10/100 Mbps network communication and PoE. LEDs show communication activity, connection status, speeds, and mode information (FIG. 2)
• AUDIO R/L: Two RCA connectors support line-level stereo input for analog stereo signals
• RS-232/422/485: 9-pin (DB9) port supports RS-232/RS-422/RS-485 data output including:
  - 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, and 115,200 Baud rates
  - 8 or 9 Data bits
  - 1 or 2 Stop bits
  - Even, Odd, Mark, Space, and None parity settings
  - CTS and RTS handshaking
  - XON/XOFF handshaking
• MIC: 1/8” mini-stereo input jack
• IR/Serial: 2-pin 3.5mm mini-Phoenix (male) captive-wire connector provides IR/Serial control output by generating IR with the use of an IR emitter (while in IR mode). This port supports high-frequency carriers of up to 1.142 MHz and can also generate IR with no carrier frequency
• I/O: Two digital 4-channel binary I/O ports for contact closure (accepts a 4-pin 3.5mm mini-Phoenix captive-wire connector). Each input is capable of voltage sensing. Input format is software selectable with interactive power sensing for IR ports

OPERATING/STORAGE ENVIRONMENT

• Operating Temperature: 0° to 45° C (32° to 113° F)
• Storage Temperature: -30° to 70° C (-22º to 158° F)
• Operating Relative Humidity: 5% to 85% (non-condensing)
• Operation intended for indoor use only

BTU/HR: 20.5

INCLUDED ACCESSORIES

• 2-pin 3.5 mm mini-Phoenix female PWR connector (41-5025)
• 4-pin 3.5 mm mini-Phoenix female I/O connector (41-5047)
• BNC to RCA Adapter (41-1074)
• CC-NIRC IR Emitter cable

Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

• Multimedia Over IP Networks (Online)
• Getting Started with Vision2 (Online)
• Signal Management Essentials (Online)
• Signal Management Design

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.