MIO-R4 Mio Modero R-4 Remote Kit

OVERVIEW
The Mio Modero R-4 remote provides custom control features and includes a 2.4-inch full-color, active-matrix TFT LCD Touch Panel, ZigBee wireless technology, two-way communication and unlimited control of devices - all in an elegant handheld rechargeable device. It has a wide coverage area and signals can be transmitted through walls, ceilings, etc. with a range of up to 100 feet indoors (dependent upon conditions and construction materials). The coverage area can be extended by using NetLinx ZigBee Pro Repeaters. And with ZigBee, any number of R-4s can be used within the same property without interfering with each other.

COMMON APPLICATION
The Mio Modero R-4 is an excellent choice for two-way LCD touch control of a wide variety of devices throughout hotels, residences or buildings of almost any size.

FEATURES

  • 2.4-inch color active-matrix TFT LCD Touch Panel
  • 240 x 320 pixel resolution
  • Transmits/Receives two-way signals using ZigBee Wireless technology
  • Near unlimited coverage when using NetLinx ZigBee Pro Repeaters
  • 29 hard buttons and two LCD buttons
  • Supports any connected system device
  • Wakes upon touching side rails, moving it, or button presses

SPECIFICATIONS

DIMENSIONS (HWD)
9 1/2" x 2" x 3/4" (24.1 cm x 5.1 cm x 1.9 cm)

WEIGHT

  • 7.2 oz (20g) without batteries
  • 8.8 oz (25g) with batteries

POWER

  • Mio Modero Lithium-Ion Rechargeable Battery
  • 12-18 VDC Power Supply for recharging battery

LCD TOUCH PANEL DISPLAY

  • 2.4" color active-matrix TFT (240 x 320 pixel resolution)
  • Viewing Angle: ± 60° horizontal, ± 60° vertical
  • Display colors: 64K (16-bit color depth)
  • Brightness: 100 cd/m2
  • Contrast: 350:1

PUSHBUTTONS
29 hard buttons, 2 LCD buttons

MEMORY

  • 32 MB of FLASH
  • 64 MB of SDRAM

RF TRANSMISSION

  • ZigBee 2.4 GHz, 2-way network communications
  • 100 feet indoors (extendable using NetLinx ZigBee Pro Repeaters)

BACKLIGHTING SYSTEM ACTIVATION

  • Touch
  • Tilt Switch
  • Push Button
  • Touch Screen

ENCLOSURE MATERIALS

  • Molded RF Transmissive Material
  • Black brushed metal top and bottom cover plates
  • Chrome Side Rails, Volume, Channel, Navigation, Select, Play and Power Buttons

REAR COMPONENTS

  • Programming Port
  • Battery Door
  • Rechargeable Battery Connection

CUSTOMIZATION
Multiple languages supported for Touch Panel and Engraved Buttons

SUPPORTED LANGUAGES
Arabic, English, French, German, Greek, Hindi, Italian, Japanese, Korean, Simplified Chinese, Portuguese, Russian, Spanish, Thai

ENVIRONMENTAL

  • Operating Temperature: 0° to 40° C (32° to 104° F)
  • Storage Temperature: -20° to 70° C (-4° to 158° F)

CERTIFICATIONS
FCC, IC, CE, IEC 60950, Japan Approval

OPTIONAL KEYPADS

  • MIO-R4-KP-ITALIAN (FG148-141)
  • MIO-R4-KP-FRENCH (FG148-142)
  • MIO-R4-KP-ARABIC (FG148-143)
  • MIO-R4-KP-MANDARIN (FG148-144)
MIO-R4 /assets/diagrams/MIO-R4.Diagram.pdf /imgs/diagrams/MIO-R4.Diagram.png _blank PDF | 2.60 MB

Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with Wireless Technology (Online)
  • TPD4 Tutorial (Online)
  • TPD4 UI Design
  • Control Designer
  • Control Installer
  • Control Programmer 1

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
/assets/coolIcons/amxUniversity.png

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Getting Started with Wireless Technology (Online)
  • TPD4 Tutorial (Online)
  • TPD4 UI Design
  • Control Designer
  • Control Installer
  • Control Programmer 1

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

 /assets/coolIcons/award.png

AWARD WINNING PRODUCTS

2007 EXC!TE Award
The Mio Modero R-4 Remote Control, which has been honored with several accolades since its launch was honored again at CEDIA 2007. We were proud to share that during separate events, Custom Retailer awarded the R-4 with a "2007 EXC!TE Award," which honors products that have garnered the most excitement in the custom electronics industry.

2007 Most Innovative Control Product For Residential Use
The Mio Modero R-4 Remote Control was awarded the InAVation Award for "Most Innovative Control Product for Residential Use" at ISE.

2007 Product of the Year
We were pleased to announce that AMX was honored with a second product award during CEDIA 2007. Electronic House also honored the R-4 by naming it a 2007 "Product of the Year." The R-4 combines the features and functionality of a larger format touch panel in a handheld remote control.

 /assets/coolIcons/aCloserLook.png
/assets/coolIcons/gsa.png

GSA

This product has been approved by the U.S. Government’s General Services Administration to be specified for use in government installations.

 MIO-R4 Products default.asp Remotes categoryRemotes.asp MIO-R4 MIOR-4.asp FG148-04 MIO-R4 Remote Only FG148-14K MIO-R4-CC Remote, Charging Cradle FG148-24K MIO-R4-ZGW Remote, Charging Cradle, ZigBee Gateway FG148-25K MIO-R4-ZGW, Charging Cradle, ZigBee Pro Gateway
2008-11-03 Remotes Mio Modero R-4 Remote /techdocs/datasheets/MIO-R4.Datasheet.pdf _blank PDF | 903 KB de /de/downloadbereich/MIO-R1_R2_R3_R4.datenblatt.pdf _blank MIO R-4 2007-07-05 Remotes Getting the Most from Your Mio Modero R-4 /assets/whitePapers/Getting_the_most_R4.pdf PDF | 180 KB _blank MIO R-4 2007-07-05 Remotes ZigBee Network Calculator /assets/whitePapers/ZigBee.Network.Calculator.xls XLS | 24 KB _blank MIO R-4 Pictorial (95) Drawings Mio Modero R Series Remote Controls /techdocs/95-0147-01.pdf _blank PDF /techdocs/endwgs/DWG/95-0147-01.dwg _blank DWG /techdocs/endwgs/95-0147-01.dxf _blank DXF MIO R-4 MIO R-3 MIO R-2 MIO R-1 Remotes MIO-R4 Mio Modero R-4 Remote /assets/revit/AMX.MIO-R1.R2.R3.R4.zip _blank ZIP /techdocs/endwgs/95-0147-01.dxf _blank DXF MIO R-4 2009-05-06 Development Tools TPDesign4 2.11.619 /assets/applicationFiles/TPDesign4_2.11.619.exe _self EXE | 40.5 MB New Features:
  • New panel devices:
    • NXD-430/435
    • TPI-PRO-DVI
  • Revised default channel codes (R-4 projects only)
    • The default channel codes for R-4 external buttons have been modified to match the corresponding G4 API values (defined in G4API.axi)
2009-05-06 TPDesign TPI-PRO TPI-PRO-DVI NXD-430 NXD-435 MVP-5200i MVP-5150 MVP-5100 MVP-8400 MVP-8400i MVP-7500 NXT-1200VG RGB Kit NXD-1200VG RGB Kit NXT-1200VG Video Kit NXD-1200VG Video Kit NXT-1500VG RGB Kit NXD-1500VG RGB Kit NXT-1500VG Video Kit NXD-1500VG Video Kit NXT-1700VG RGB Kit NXD-1700VG RGB Kit NXT-1700VG Video Kit NXD-1700VG Video Kit NXT-1200V NXD-1200V NXD-500i NXD-CV5 NXD-700Vi NXT-CV7 NXD-CV7 NXD-1000Vi NXT-CV10 NXD-CV10 NXV-300 MIO R-4 NXP-PLV 2009-10-23 Development Tools TPDesign4 G4 Support Files 2.11.16 /assets/applicationFiles/G4SupportFiles_2.11.16.exe _self EXE | 25.3 MB

TPDesign G4 Support Files provides a distribution mechanism for support files used by TPDesign4, NetLinx Studio, G4 PanelPreview, and VisualArchitect when opening .TP4 panel project files.

New Features:
  • New panel devices:
    • NXD-430/435
      • Added new resolution (272x480 - portrait)
      • Enabled Dynamic Images feature
  • New border styles:
    • (all panel devices except the Mio-R4)
      • News Header
      • Smart Button Squared
      • Smart Button Bubbled
  • Updated Advanced Codes:
    • TPI-PRO/TPI-PRO-DVI
      • Updated Embedded TakeNote codes

NOTE: After installing the 2.11.16 update, TPDesign4 will require users to perform a Full System Files transfer to install the new border styles on the panel device.

 2009-10-23 TPDesign TPI-PRO TPI-PRO-DVI NXD-430 NXD-435 MVP-5200i MVP-5150 MVP-5100 MVP-8400 MVP-8400i MVP-7500 NXT-1200VG RGB Kit NXD-1200VG RGB Kit NXT-1200VG Video Kit NXD-1200VG Video Kit NXT-1500VG RGB Kit NXD-1500VG RGB Kit NXT-1500VG Video Kit NXD-1500VG Video Kit NXT-1700VG RGB Kit NXD-1700VG RGB Kit NXT-1700VG Video Kit NXD-1700VG Video Kit NXT-1200V NXD-1200V NXD-500i NXD-CV5 NXD-700Vi NXT-CV7 NXD-CV7 NXD-1000Vi NXT-CV10 NXD-CV10 NXV-300 MIO R-4 NXP-PLV 2009-10-01 Remotes Mio Modero R-4 ZigBee Module Firmware 3.01.05 /assets/firmwareFiles/SW0148_01B_MIOR4_ZIGBEE_MODULE_v3_01_05.kit _self KIT | 108 KB

NOTE:

  1. When upgrading from any version less than v3.00.00, an upgrade to v3.00.00 must be performed first. Load the SW0148_01B_MIOR4_ZIGBEE_MODULE_v3_00_00.kit file first. If SW0148_01A_MIOR4_v3_00_00.kit is accidentally loaded first, the radio will be unable to communicate with the host processor and cannot be upgraded. In this case, the host processor will have to be downgraded to an older version of the firmware and then upgraded again with the radio being upgraded first. Once the remote is upgraded to v3.00.00, the v3.01.05 firmware may be loaded in any order.
  2. For the proper operation of all devices, it is recommended that all devices be brought up to the most current firmware version.

New Features:

  • Support has been added for the NetLinx command DEVICE_WAKE. This command requests that a device in standby state wake up. If the device is in standby state, it will transition to awake, generating an asynchronous AWAKE DATA_EVENT. Due to the nature of the STANDBY state, the R4 in STANDBY syncs with the gateway at approximately 50 second intervals. The request to wake will not be processed until one of these sync events, so the AWAKE state will appear delayed.
  • Telnet interface through the USB port. Open a telnet session, IP address 10.0.0.2, TCP port 23, and type "help" for a list of available commands. This interface may be used to configure the R4 for use in a network using a pre-configured key.
      • To set the preconfigured key:
    1. Start a telnet session with the R4 through the USB port.
    2. Use the command "set zigbee extended PAN ID [preconfigured key]"
      Where: extended PAN ID = Network desired to join (AZGxxxxx)
      [preconfigured key] = user supplied key
      (xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx)
      Example: set zigbee AZG12345 11:22:33:44:55:66:77:88:99:11:22:33:44:55:66:77
    3. Reboot R4.

CHANGES in this Release:

  • Resolved bugs with connectivity (R4/R3s falling offline and never coming back online)
  • Added support for the "DEVICE_WAKE" NetLinx command
  • Resolved R4 sleep bugs
  • Resolved bugs with hard keys becoming disabled after using set up pages
  • Added support for the Get Time function

Known Issues:

  • On systems that have one gateway and no repeaters, the gateway or remotes can become inoperable under extreme amounts of traffic (for example, 30 messages every two seconds to each of six remotes). Rebooting these devices will bring them back online.
  • The "show mem" command is not functional on the telnet interface to the R4.
  • When two R4 remotes are connected on the same USB bus, downloads will occasionally fail, or units will fail to be recognized.
  • Setting the R4 device number to 0 can cause it to not be correctly recognized by the master.

 2009-10-01 MIO R-4 2009-10-01 Remotes Mio Modero R-4 Firmware 3.01.05 /assets/firmwareFiles/SW0148_01A_MIOR4_v3_01_05.kit _self KIT | 9.50 MB

NOTE:

  1. When upgrading from any version less than v3.00.00, an upgrade to v3.00.00 must be performed first. Load the SW0148_01B_MIOR4_ZIGBEE_MODULE_v3_00_00.kit file first. If SW0148_01A_MIOR4_v3_00_00.kit is accidentally loaded first, the radio will be unable to communicate with the host processor and cannot be upgraded. In this case, the host processor will have to be downgraded to an older version of the firmware and then upgraded again with the radio being upgraded first. Once the remote is upgraded to v3.00.00, the v3.01.05 firmware may be loaded in any order.
  2. For the proper operation of all devices, it is recommended that all devices be brought up to the most current firmware version.

New Features:

  • Support has been added for the NetLinx command DEVICE_WAKE. This command requests that a device in standby state wake up. If the device is in standby state, it will transition to awake, generating an asynchronous AWAKE DATA_EVENT. Due to the nature of the STANDBY state, the R4 in STANDBY syncs with the gateway at approximately 50 second intervals. The request to wake will not be processed until one of these sync events, so the AWAKE state will appear delayed.
  • Telnet interface through the USB port. Open a telnet session, IP address 10.0.0.2, TCP port 23, and type "help" for a list of available commands. This interface may be used to configure the R4 for use in a network using a pre-configured key.
      • To set the preconfigured key:
    1. Start a telnet session with the R4 through the USB port.
    2. Use the command "set zigbee extended PAN ID [preconfigured key]"
      Where: extended PAN ID = Network desired to join (AZGxxxxx)
      [preconfigured key] = user supplied key
      (xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx)
      Example: set zigbee AZG12345 11:22:33:44:55:66:77:88:99:11:22:33:44:55:66:77
    3. Reboot R4.

CHANGES in this Release:

  • Resolved bugs with connectivity (R4/R3s falling offline and never coming back online)
  • Added support for the "DEVICE_WAKE" NetLinx command
  • Resolved R4 sleep bugs
  • Resolved bugs with hard keys becoming disabled after using set up pages
  • Added support for the Get Time function

Known Issues:

  • On systems that have one gateway and no repeaters, the gateway or remotes can become inoperable under extreme amounts of traffic (for example, 30 messages every two seconds to each of six remotes). Rebooting these devices will bring them back online.
  • The "show mem" command is not functional on the telnet interface to the R4.
  • When two R4 remotes are connected on the same USB bus, downloads will occasionally fail, or units will fail to be recognized.
  • Setting the R4 device number to 0 can cause it to not be correctly recognized by the master.

 2009-10-01 MIO R-4 en de au eu AMX Brochures 2010 Spring Pocket Guide 2010-02-10 /assets/literature/2010.Spring.PocketGuide.pdf /assets/literature/thumbs/2010.Spring.PocketGuide.jpg _blank PDF | 29.60 MB 1 MVP-5100 MVP-5150 MVP-5200I MVP-8400 MVP-8400I NXD-435 NXD-430 NXD-435P NXD-500i NXD-700Vi NXD-1000Vi NXD-1200V NXD-1200VGVideoKit NXD-1200VGRGBKit NXD-1500VGVideoKit NXD-1500VGRGBKit NXD-1700VGVideoKit NXD-1700VGRGBKit NXA-TTS43X NXA-TTS500 NXD-CV5 NXT-CV7 NXT-CV10 NXT-1200V NXT-1200VGVideoKit NXT-1200VGRGBKit NXT-1500VGVideoKit NXT-1500VGRGBKit NXT-1700VGVideoKit NXT-1700VGRGBKit NXV-300 NDT-VKP TPI-PRO TPI-PRO-DVI MIO R-1 MIO R-2 MIO R-3 MIO R-4 MIO-RCC-KIT MET-6N MET-7 MET-13 DAS-MET-6SRC DAS-MET-NUM MIO-CLASSIC-S MIO-CLASSIC-D MIO-PRESTIGE-S MIO-PRESTIGE-D MIO-DMS MET-ECOM MET-ECOM-D CSG-500 CSG-544 CSG-580 CP-1008-US CP-1008-UK CP-1008-EU CP-1016-TR-US CP-1016-TR-UK CP-3006 CP-3008 CP-3017-NA CP-3017-TR-US NXP-PLV PTE-300 NXR-ZGW-PRO NI-700 NI-900 NI-2100 NI-3100 NI-4100 NI-3101-SIG NXB-KNX ClassroomManager ExhibitManager HomeManager IntelligentManager MeetingManager VenueManager WorshipManager RMSCodeCrafter NSS-EXIP NSS-RMS-EXCH NSS-RMS-LN NSS-RMS-GW NSS-RMS-PLAN NSS-RMS-EMS NSS-RMS-R25 NSS-RMS-PPC AMXMEETINGROOM NSS-VOTE ANT-TAG NetLinxStudio NSS-VA DVX-2100HD EXP-TOTAL-DVX-2100HD-DC EXP-TOTAL-DVX-2100HD-SM EXP-TOTAL-AVX-400DC EXP-TOTAL-AVX-400SM EXP-TOTAL-AVX400-DC EXP-TOTAL-AVX400-SM AVX-400 HPX-1600 HPX-AV100-CSA HPX-AV100-RGBA HPX-C5400-CSA HPX-C5400-VGAA HPX-C5400-CNA HPX-N100-RJ45 HPX-N102-RJ45 HPX-N100-USB HPX-U100-BTN HPX-U200-MOD HPX-U400-MET-6N HPX-U400-MET-7 HPX-U400-MET-13 HPX-U400-CP-1008 HPX-U400-SP-08-AX HPX-P200-US HPX-P200-UK HPX-P200-EU HPX-P200-AU HPX-B050 HPX-B100 HPX-B200 HPX-B050-L HPX-B100-L HPX-AC-SB HPX-AC-MB HPX-AC-TK UPX-CSA-US UPX-CSA-UK UPX-CSA-EU UPX-CNA-US UPX-CNA-UK UPX-CNA-EU UPX-RGBA-US UPX-RGBA-UK UPX-RGBA-EU PrecisDSP_Stereo-RCA-DVC PrecisLT_RGBhv-HD15_Stereo-3T PrecisLT_Component-BNC_Stereo-5T PrecisLT_Component-RCA_Stereo-RCA PrecisLT_SVideo-4PinDIN_Stereo-5T PrecisLT_Composite-BNC_Stereo-5T Octaire_Stereo-5T-DVC Octaire_RGBHV-BNC Octaire_RGBHV-BNC_Stereo-5T-DVC Octaire_Component-BNC Octaire_Component-BNC_Stereo-5T-DVC Octaire_YC-BNC Octaire_YC-BNC_Stereo-5T-DVC Octaire_Composite-BNC Octaire_Composite-BNC_Stereo-5T-DVC OptimaSD_RGBHV-BNC OptimaSD_RGBHV-BNC_Stereo-5T Optima_Stereo-5T-DVC AVS-OP-0808-00T Optima_RGBhv-BNC Optima_RGBhv-BNC_Stereo-5T-DVC Optima_RGBhv-HD-15 Optima_RGBhv-HD-15_Stereo-5T-DVC Optima_RGBhv-CatPro Optima_Component-BNC AVS-OP-0808-34B Optima_Component-BNC_Stereo-5T-DVC Optima_DVI Optima_SDI-BNC AVS-OP-0808-9D7 AVS-OP-0808-HD0 Optima_YC-BNC Optima_YC-BNC_Stereo-5T-DVC Optima_SVideo-4PinDIN Optima_SVideo-4PinDIN_Stereo-5T-DVC Optima_Composite-BNC Optima_Composite-BNC_Stereo-5T-DVC Optima_Custom Modula_Stereo-DVC Modula_SDSDI-BNC Modula_HDSDI-BNC Modula_RGBhv-BNC Modula_RGBhv-BNC_Stereo-5T-DVC Modula_RGBhv-HD15 Modula_RGBhv-HD15_Stereo-5T-DVC Modula_HDTV_Component-BNC Modula_HDTV_Component-BNC_Stereo-5T-DVC Modula_YC-BNC Modula_YC-BNC_Stereo-5T-DVC Modula_SVideo-4PinDIN Modula_SVideo-4PinDIN_Stereo-5T-DVC Modula_Composite-BNC Modula_Composite-BNC_Mono-3T-DVC Modula_Composite-BNC_Stereo-5T-DVC ModulaCatPro ModulaCatPro_Custom EpicaDGX32_DVI EpicaDGX32-Custom EpicaDGX144 DAS-T0808-SIG DAS-T0804-SIG DAS-T0808X-SIG DAS-T0804X-SIG DAS-TAMP8-SIG DAS-TAMP4-SIG AVB-DA-RGBHV-0102 AVB-DA-RGBHV-0103 AVB-DA-RGBHV-0104 AVB-DA-RGBHV-0106 AVB-DA-RGBHV-HD15-0106 AVB-DA-RGBHV-ST-0102 AVB-DA-SVID-0104_VSTYLE AVB-DAD-RGBHV-HD15-0104 DistributionAmplifierDriver-RGBHV DistributionAmplifierDriver-Component_1x2 DistributionAmplifierDriver-Component_1x6 AVS-SL-PR-0201-0301 AVS-SL-PR-0401-0601 VStyle_Cat5_CatPro VStyle_Cat5_SVideo-Stereo VStyle_CAT5_YC-Stereo UDM-1604C UDM-0808-SIG UDM-ABB-8-SIG UDM-0102 UDM-0404 UDM-RX02 UDM-RX02N Optima_HDMI HDMI-UTPRO-0808 HDMI-UTPRO-0808-8RX HDMI-UTPRO-RPT V2-2100-WMV V2-4210-WMV V2-10420-WMV V2-2100-MPEG V2-4210-MPEG V2-10420-MPEG V2-4100-DVB V2-8420-DVB V2-2000-WMV V2-1000-MPEG V2-4000-DVB V2-ARCHIVE V2-MASTER-0010 V2-RECORD V2-PROD V2-TDS V2-MPEG2-LIVE DTV-TX01-DVB-T DTV-TX02-DVB-S DTV-TX03-US DTV-RX01-SD DTV-RX02-HD DTV-RC01 IS-SPX-1000 IS-SPX-XPRESS-S IS-SPX-XPRESS-E IS-2-GO-COR IS-2-GO-CORLM IS-2-GO-EDU IS-2-GO-EDULM IS-COMP4-DESK IS-COMP4-SERV IS-PLAYER-200 IS-PLAYER-200LM IS-CUSTOM en de au eu 1 300 1 yes yes 97-1001 en au AMX Brochures R-4 and The Mio Modero Remote Family 2008-09-04 /assets/literature/R4.Mio.Modero.Remote.Family.pdf /assets/literature/thumbs/amx_R4MioModeroRemoteFamily.jpg _blank PDF | 6.20 MB MIO R-1 MIO R-2 MIO R-3 MIO R-4 MIO-RCC-KIT NXR-ZGW NXR-ZRP 1 en au 1 300 1 no no 97-1000 de eu AMX Brochures R-4 and The Mio Modero Remote Family 2008-09-04 /assets/literature/R4.Mio.Modero.Remote.Family.pdf /assets/literature/thumbs/amx_R4MioModeroRemoteFamily.jpg _blank PDF | 6.20 MB MIO R-1 MIO R-2 MIO R-3 MIO R-4 MIO-RCC-KIT NXR-ZGW NXR-ZRP 1 de eu 1 300 1 no yes 97-1000 en de au eu AMX Brochures Mio Modero R-Series Remotes Actual Size Piece 2008-09-11 /assets/literature/R4_remotepp.pdf /assets/literature/thumbs/amx_R4_remotepp.jpg _blank PDF | 1.11 MB MIO R-1 MIO R-2 MIO R-3 MIO R-4 1 en de au eu 1 300 1 no no NA Remotes MIO-R4-CC - Front /assets/logosAndPhotos/MIO-R4-CC.Front.png /assets/logosAndPhotos/thumbnails/MIO-R4-CC.Front.jpg _blank PNG | 3.57 MB MIOR-4 1 Remotes MIO-R4-CC - Front Left /assets/logosAndPhotos/MIO-R4-CC.Front.Left.png /assets/logosAndPhotos/thumbnails/MIO-R4-CC.Front.Left.jpg _blank PNG | 1.14 MB MIOR-4 1 Remotes MIO-R4-CC - Front Right /assets/logosAndPhotos/MIO-R4-CC.Front.Right.png /assets/logosAndPhotos/thumbnails/MIO-R4-CC.Front.Right.jpg _blank PNG | 1.14 MB MIOR-4 1 Remotes MIO-R4 /assets/logosAndPhotos/MIOR-4.png /assets/logosAndPhotos/thumbnails/MIOR-4.jpg _blank PNG | 2.74 MB MIOR-4 1 Beauty Shots Mio Modero R-4 on Desk /assets/logosAndPhotos/beautyshot_r4_desk.png /assets/logosAndPhotos/thumbnails/beautyshot_r4_desk.jpg _blank PNG | 11 MB MIOR-4 1 2009-09-25 Remotes Operation/Reference Guide - MIO-R4 Mio Modero R-4 Remote /techdocs/MIO-R4.OperationReferenceGuide.pdf _blank 2009-09-25 PDF | 1.69 MB MIO R-4 2009-07-06 Remotes Quick Start Guide - MIO-R4 Mio Modero R-4 Remote /techdocs/MIO-R4.QuickStartGuide.pdf _blank 2009-07-06 REV G PDF | 212 KB MIO R-4 2007-10-09 Remotes Installation Guide - ZigBee Network /techdocs/ZigBee.InstallationGuide.pdf _blank 2007-10-09 PDF | 212 KB MIO R-3 MIO R-4 2010-01-14 G4 PanelBuilder Gradient /ui/assets/Designs/files/AMX/Gradient/GradientR4.TP4 /ui/assets/Designs/images/AMX/Gradient/r4_gradient_r4.png _blank TP4 | 2.30 MB MIOR-4 G4 PanelBuilder 240x320 2 2006-09-25 Remote Controls Mio Modero R-3 and R-4 Remote Presentation /assets/presentations/AMXMioR-3andR-4Pres.pps PPS | 4.64 MB _blank MIO R-3 MIO R-4 NXR-ZGW NetLinx ZigBee Pro Gateway FG5791-11 NXR-ZGW-PRO.asp _self NXR-ZRP NetLinx ZigBee Pro Repeater FG5791-03 NXR-ZRP.asp _self MIO-RCC-KIT Mio Remote Charging Cradle Kit FG147-03K MIO-RCC-KIT.asp _self MIO-RBP Rechargeable Lithium-Ion Battery FG147-10 MIO-RBP.asp _self CC-USB USB Programming Cable FG10-5965 CC-USB.asp _self MIO-R4-KP-TRANSPORT Mio R-4 Device Transport Keypad FG148-145 MIO-R4-KP-TRANSPORT.asp _self MIO-R4-KP-EURO Mio R-4 European Keypad FG148-146 MIO-r4-kp-euro.asp _self