SPECIFICATIONS

DIMENSIONS (HWD)
4 3/4" x 7 9/16" x 13/16" (12.1 cm x 19.2 cm x 2.0 cm)

WEIGHT
1.25 lbs (570 grams)

POWER REQUIREMENTS (WITHOUT CHARGING)
Panel with battery fully charged or with no battery:

Constant current draw: 0.3 A @ 12 VDC
Startup current draw: 0.4 A @ 12 VDC

POWER REQUIREMENTS (WHILE CHARGING)
Panel while charging battery:

Constant current draw: 1.1 A @ 12 VDC
Startup current draw: 1.3 A @ 12 VDC

MINIMUM POWER SUPPLY REQUIRED

PS3.0 Power Supply (FG423-30) - both 120 VAC and 240 VAC models are shipped with this power supply

POWER MODES

Awake: All necessary modules are powered up and device remains online with the NetLinx Master
Asleep: Only the backlight will be turned off after the user selectable time of inactivity has elapsed. Panel resumes the ON mode in ~ 1 second upon a momentary press of the touchscreen.
Processor Shutdown: Power to all peripherals and components is turned off. The system remains in this mode until either it is rebooted or the battery is completely drained. The panel is re-activated by pressing the touchscreen and holding until the AMX splash screen appears.

CERTIFICATIONS

FCC Part 15 Class B
CE
IEC/EN-60950
RoHS
Japan Approved
Lithium-polymer microbattery: UN/IATA

BATTERY DURATION

2.5 days of normal use (25% On state, 25% Standby, and 50% Off)
6 hours of continuous use (continuous On state)

MEMORY

128 MB Mobile DDRAM (upgrade not available)
256 MB NAND Flash (upgrade not available)

SCREEN PROPERTIES

Screen resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency
Type: WVGA
Aspect ratio: 16 x 9
Brightness (luminance): 300 cd/m²
Channel transparency: 8-bit Alpha blending
Contrast ratio: 400:1
Display colors: 262,144 colors (18-bit color depth)
Dot/pixel pitch: 0.23 mm
Panel type: TFT Color Active-Matrix

VIEWING ANGLE
Vertical: +80° (up from center) and -40° (down from center)

EXTERNAL COMPONENTS
Connector: 5-pin Mini-USB connector used for output to USB programming, firmware update, and touch panel file transfer between the PC and the target panel.

Note: When connecting the panel to PC using a CC-USB (or compatible) cable, be sure to power the panel On before attempting to connect the USB cable from the PC to the mini-USB port on the panel.

INTERNAL COMPONENTS
IR Emitters: Transmit IR over 20 feet (6.10 m) from the panel.

IR emitters on G4 panels share the device address number of the panel.
Transmits AMX fixed frequencies at 38 kHz and 455 kHz and user programmable frequencies from 20 kHz to 1.5 MHz

ENVIRONMENTAL

Operating Temperature: 0° C (32° F) to 40° C (104° F)
Operating Humidity: 5% - 85% RH
Storage Temperature: -20° C (-4° F) to 60° C (140° F)
Storage Humidity: 5% - 85% RH

INCLUDED ACCESSORIES

Installation Guide (93-5966-07)
PS3.0 Power Supply (FG423-30)