OVERVIEW
The MVP-8400 is a clean, seamless, unobtrusive touch panel that
combines Wall/Flush Mount flexibility, table top functionality and
wireless mobility that gives users the ability to take control from
anywhere, at any time. A fully compatible standard 802.11 Wi-Fi
Card provides additional wireless control features and eliminates
the inconvenience of installing and using cables. Additionally both
38 kHz and 455 kHz 1-way IR are also built in.
COMMON APPLICATION
A clear favorite for residential or commercial control such as
automating a home theater or 802.11b/g wireless A/V, lighting
and HVAC control of churches or network operating centers.
FEATURES
- 8.4” color active-matrix TFT with 4 x 3 Aspect Ratio
- Screen Resolution (HV): 800 x 600 pixels with Anti-glare Overlay
- Display colors: 262 K (18 bit color depth)
- Built-in speakers (2) and microphone
- 128 MB RAM/512 MB CompactFlash Memory or more (upgradeable)
- 802.11g WiFi for two-way network communications
- Wireless communications remain secure using WEP, WPA, WPA2, EAP-TLS, EAP-TTLS and PEAP network security standards
- 38 kHz and 455 kHz 1-way IR
- Nine programmable hard buttons
- Operates with two MVP-BP Battery Packs
- 12 VDC Power Supply for recharging batteries
SPECIFICATIONS
DIMENSIONS (HWD)
7 3/16” x 10 1/2” x 1 1/4” (18.2 cm x 26.6 cm x 3.1 cm)
WEIGHT
- 2.0 lbs (0.91 kg)
- Panel with one battery: 2.25 lbs (1.02 kg)
- Panel with two batteries: 2.65 lbs (1.20 kg)
SCREEN PROPERTIES
- Screen resolution: 800 x 600 pixels (HV) @ 60 Hz frame frequency
- Aspect ratio: 4 x 3
- Brightness (luminance): 180 cd/m2
- Channel transparency: 8-bit Alpha blending
- Contrast ratio: 350:1
- Display colors: 256K colors (18-bit color depth)
- Dot/pixel pitch: 0.21 mm
- Panel type: TFT Color Active-Matrix
VIEWING ANGLE
- Vertical: + 60° (up from center) and - 40° (down from center)
POWER REQUIREMENT (WITHOUT CHARGING)
Panel with batteries fully charged or with no batteries:
- Constant current draw: 1.2 A @ 12 VDC
- Startup current draw: 1.8 A @ 12 VDC
- If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures
POWER REQUIREMENT (WHILE CHARGING)
Panel while charging batteries:
- Constant current draw: 3.2 A @ 12 VDC
- Startup current draw: 3.8 A @ 12 VDC
- If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures
MINIMUM POWER SUPPLY REQUIRED
- PS4.4 Power Supply (FG423-45)
-All MVP models are shipped with this power supply
POWER MODES
Panel with batteries fully charged or with no batteries:
- ON: Panel is fully functional.
- STANDBY: Panel uses low power, the LCD/backlight is shutdown, LEDs still function. Panel resumes the ON mode in ~ 1 second.
- OFF: On-board programs not running, touch screen still powered, LED not functional. Panel resumes the ON mode in ~ 30 seconds.
CERTIFICATIONS
- FCC Part 15 Class B and CE
- IEC 60950
BATTERY DURATION (using 2 batteries)
- Eight hours of normal use (25% On state, 25% Standby, and 50% Off)
- Four hours of continuous use (continuous On state).
The MVP-8400 panel is shipped with two MVP-BP batteries. You must use both batteries to obtain the duration times given above.
MEMORY
- 128 MB SDRAM
- 512 MB Compact Flash (upgradeable to 1 GB) – factory programmed
ENVIRONMENTAL
- Operating Temperature: 0° C (32° F) to 40° C (104° F)
- Operating Humidity: 20% - 85% RH
- Storage Temperature: -20° C (-4° F) to 60° C (140° F)
- Storage Humidity: 5% - 85% RH
INCLUDED ACESSORIES
- Wireless Interface Compact Flash card (CF Type 1) (pre-installed into MVP)
- PS4.4 Power Supply (FG423-44)
- Stylus (pre-installed onto the left side of the unit)
- Two MVP-BP Power Packs (FG5965-20)
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
- TPD4 Tutorial (Online)
- TPD4 UI Design
- Control Designer
- Quest for Power (Online)
- Control Installer
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
QUICK TIP
The MVP-8400 comes ready to support the exclusive AMX G4 Computer Control application (FG070-602), which delivers remote access and control of any networked computer directly to the MVP-8400. Launch digital music. Cruise the Internet. Check and respond to email -
all at the touch of a button.
TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
- TPD4 Tutorial (Online)
- TPD4 UI Design
- Control Designer
- Quest for Power (Online)
- Control Installer
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
AWARD WINNING PRODUCTS
2004 Best Touchscreen Control System
The RESI Awards, sponsored by Residential Systems to honor the most innovative product designs in the custom installation industry, awarded AMX "Best Touchscreen Control System" for its Modero ViewPoint 8400. An esteemed panel of custom installers and industrial designers judged this year's entries on their aesthetic appeal, problem-solving innovation and ergonomic design.
GSA
This product has been approved by the U.S. Government’s General Services Administration to be specified for use in government installations.
G4 TECHNOLOGY
This product features AMX’s exclusive, powerful G4 graphics engine – the driving force behind the advanced graphics and image processing capability on a variety of AMX Touch Panels and other devices.