MVP-WDS Wall/Flush Mount Docking Station for 8.4" and 7.5" Modero® Touch Panels

OVERVIEW
Place the wireless Modero® ViewPoint® into the Wall/Flush Mount Docking Station and re-charge its batteries while remaining in continuous control. Attach a keyboard and mouse using the docking station’s USB ports - a great feature for surfing the Web with G4 Computer Control. The MVP-WDS comes with a unique anti-theft locking mechanism. Keep the MVP safe and secure by using the MVP-WDS security latch to maintain a tight grip on the panel. Removing the panel is easy. With a push of the button, the MVP glides forward for removal and transport. If security is enabled, a user must enter a valid security code before the MVP is released.

FEATURES

  • Rare earth magnet and security latch to secure the MVP to the MVP-WDS
  • Release pushbutton to remove the MVP from the MVP-WDS
  • Two LEDs (through pushbutton) to indicate battery-charging status and MVP communications
  • Two Type A USB ports for keyboard and mouse
  • Power supply jack, 13.5 VDC, 3.5 mm Phoenix

SPECIFICATIONS

DIMENSIONS (HWD) 8 5/8” x 12 3/4” x 3” (29.9 cm x 32.3 cm x 7.6 cm)
Note: Always use the cutout/installation dimensions for the MVP-WDS when installing this unit into various surfaces. This SP engineering drawing is available online at www.amx.com/techdocs/95596511.pdf.

WEIGHT

  • Stand-alone: 4.67 lbs (1.89 kg)
  • With two batteries: 5.47 lbs (2.48 kg)

POWER REQUIREMENTS

  • Stand-alone with no batteries: 0.1 A @ 12 VDC
  • Stand-alone charging two batteries: 2.1 A @ 12 VDC
  • With no batteries and charging a connected MVP panel’s two internal batteries: 3.3 A @ 12 VDC
  • With two batteries and charging a connected MVP panel’s two internal batteries: 3.3 A @ 12 VDC

CHARGING FEATURES

  • Two Battery Bays: Simultaneous Charging
  • Charge time for two depleted batteries ~ 5 hours

FRONT PANEL COMPONENTS

  • Securing Magnet
  • Security Latch: Adds the primary layer of security when mounting the MVP. When the MVP is inserted, this latch grabs onto the rear of the MVP and secures it from being removed
  • Interface Connector Pins: A set of retractable pins (male) that connect to the underside MVP connector strip. This connection provides both communication and power between the MVP and the MVP-WDS
  • Support Cradle: This retractable mechanism supports a resting MVP panel and allows a user to either insert or remove a connected MVP panel
  • LEDs: Two blue LEDs indicate either: Left LED monitors the battery status within either the MVP-WDS or MVP or Right LED monitors communication between the MVP-WDS and MVP
  • Security Release pushbutton: Located on the front of the unit, this pushbutton toggles an on-screen security keypad (if security is enabled). (Entering the correct release code allows the MVP-WDS to release the MVP from the security latch)
  • Battery Compartment: Houses up to two MVP-BP batteries

SIDE PANEL COMPONENTS

  • Host USB Connectors: Two type A USB ports connect an external keyboard and mouse device for use with the G4 Computer Control application
  • Power Connector: 2-pin 3.5 mm mini-Phoenix (male) connector

ENVIRONMENTAL

  • Operating Temperature: 0º C (32º F) to 40º C (104º F)
  • Operating Humidity: 20% to 85% RH
  • Storage Temperature: -20º C (-4º F) to 60º C (140º F)
  • Storage Humidity: 5% to 85% RH

INCLUDED ACCESSORIES
Installation Kit (KA2250-01)
US MVP-WDS Products default.asp User Interface Accessories categoryUserInterfaceAccessories.asp MVP-WDS MVP-WDS.asp FG5965-11 Black FG5965-21 Silver
2006-03-24 User Interface Acc. MVP Wall/Flush Mount Docking Station for 8.4" and 7.5" Modero ViewPoint /techdocs/datasheets/MVPWallFlushMountDockingStationDS.pdf _blank PDF | 184 KB de /de/downloadbereich/MVP-WDS.datenblatt.pdf _blank MVP-WDS Spec. (SP) Drawings MVP-WDS Mounting/Millwork Specification (2 Pages) /techdocs/SP596501.pdf _blank PDF /techdocs/endwgs/SP596501.dxf _blank DXF MVP-WDS Pictorial (95) Drawings MVP-WDS Wall/Flush Mount Docking Station for 8.4" and 7.5" Modero ViewPoint (2 pages showing dimensions within a CB-MVPWDS) /techdocs/95596511.pdf _blank PDF /techdocs/endwgs/95596511.dxf _blank DXF MVP-WDS User Interface Acc. MVP-WDS Wall/Flush Mount Docking Station for 8.4" and 7.5" Modero ViewPoint /assets/revit/AMX.MVP-WDS.zip _blank ZIP /techdocs/endwgs/95596511.dxf _blank DXF MVP-WDS 2008-11-17 Touch Panels MVP Docking Stations v3.00 Firmware 3.00

NOTE: This version of firmware is functionally the same as version 2.05. It has been recompiled for new hardware, and changed to version 3.00

NOTES: MVP-WDS and MVP-TDS Firmware (Obtain from AMX Technical Support) In order to download this or any other cradle firmware, the following panel firmware versions !!MUST!! be present:

  • MVP-8400 firmware higher than v2.84.41
  • MVP-7500 firmware higher than v2.84.31

If the panel firmware does not adhere to the above requirements the cradle will be rendered inoperable by the download and will need to be shipped back to AMX for reprogramming

Fixes:

  • Recompiled for updated processor on new hardware
 | 2008-11-10 MVP-TDS MVP-WDS en au AMX Products Touch Panels 2008-09-04 window.open('/flash/literature/Touch.Panels.Brochure/index.html','literatureWindow','top=20,left=20,resizable=1');return false; /assets/literature/TP.Brochure.pdf /assets/literature/thumbs/amx_touchPanels.jpg _blank PDF | 2.83 MB 1 MVP-8400 MVP-8400i MVP-5200i MVP-5150 MVP-5100 MVP-TCS-52 MVP-WCS-52 MVP-WDS MVP-TDS MVP-KS NXA-WC80211G/CF NXD-CV5 NXD-500i NXT-CV7 NXD-700VI NXT-CV10 NXD-1000VI NXA-KLB NXT-1200V NXD-1200V NXD-1200VG Video Kit NXD-1200VG RGB Kit NXT-1200VG Video Kit NXT-1200VG RGB Kit NXD-1500VG Video Kit NXD-1500VG RGB Kit NXT-1500VG Video Kit NXT-1500VG RGB Kit NXD-1700VG Video Kit NXD-1700VG RGB Kit NXT-1700VG Video Kit NXT-1700VG RGB Kit TPI-PRO NXA-BASE/B Kit NXA-BASE/1 Kit NXT-CHG Kit NXA-USBCC NSS-PFRAME NXA-USBTN en au 1 500 1 no no 97-1002 Beauty Shots 7.5" Modero ViewPoint Touch Panel On Wall /assets/logosAndPhotos/beautyshot_7.5in.flush.mount.on.wall.png /assets/logosAndPhotos/thumbnails/beautyshot_7.5in.flush.mount.on.wall.jpg _blank PNG | 9.84 MB MVP-7500 MVP-WDS 1 User Interface Acc. MVP-WDS with MVP-8400 /assets/logosAndPhotos/MVP-WDS.8400-Docked.png /assets/logosAndPhotos/thumbnails/MVP-WDS.8400-Docked.jpg _blank PNG | 7.24 MB MVP-WDS 3 User Interface Acc. MVP-WDS (front angle) /assets/logosAndPhotos/MVP-WDS (front angle).png /assets/logosAndPhotos/thumbnails/MVP-WDS (front angle).jpg _blank PNG | 834 KB MVP-WDS 3 User Interface Acc. MVP-WDS (front) /assets/logosAndPhotos/MVP-WDS (front).png /assets/logosAndPhotos/thumbnails/MVP-WDS (front).jpg _blank PNG | 1.58 MB MVP-WDS 3 User Interface Acc. MVP-WDS - Side /assets/logosAndPhotos/MVP-WDS-Side.png /assets/logosAndPhotos/thumbnails/MVP-WDS-Side.jpg _blank PNG | 5.03 MB MVP-WDS 3 2009-01-23 User Interface Acc. Operation/Reference Guide - MVP-WDS Wall/Flush Mount Docking Station for 8.4" and 7.5" Modero ViewPoint /techdocs/MVP-WDS.OperationReferenceGuide.pdf _blank 2009-01-23 REV F PDF | 1.27 MB MVP-WDS MVP-BP Additional Battery Pack FG5965-20 MVP-BP.asp _self PSN4.4 4.4 A Power Supply FG423-45 PSN4.4.asp _self CB-MVPWDS Rough-in Box for Wall Docking Station FG037-10 CB-MVPWDS.asp _self