AVS-MD-BLBL-PRO
I/O RANGE
- INPUTS: 32 Catpro RX
- OUTPUTS: 32 Catpro TX
Receive, route, and transmit uncompressed RGBHV + stereo over category cable without worrying about exact cable measurements or readjusting gain, peak, and skew when routing signal paths of various lengths.
For even more flexibility, combine CAT-5, HD-15, and stereo audio boards in the same system-and route between them with ease.
For product assistance, configuration, or pricing please contact us at 509.235.2635 or 800.622.0246, or e-mail APGSales@amx.com.
FEATURES
- Resolutions up to 1600x1200 @ 60 Hz and 1920x1080 @ 60 Hz
- Compatible with UTP and STP category cable (5, 5e, 6, 6e ...)
- Intuitive gain, peak, and skew adjustments with the CatPro Software Wizard
- CAT-5 signal paths up to 1,000 feet (total signal path before and after the router)
- Standard RS-232/422 control port
- Supports AutoPatch simple BCS serial control protocol
- Ships with free APControl software
- Breakaway to route audio, audio follow video, or video
- Rack mounting ears included
- Customizable
- Remote control options available
- TCP/IP control available via an external module
GENERAL
- AC POWER: 100-240 VAC (50-60 Hz)
- POWER CONSUMPTION (Max.): 520 Watts per enclosure
- POWER CONSUMPTION (Typical): 255 Watts per enclosure
- OPERATIONAL TEMPERATURE: 32° to 110° F (0° to 43° C)
- HUMIDITY: 0 to 90% non-condensing
- DIMENSIONS (With Rack Ears):
- 7.0" x 18.8" x 17.0"
- 17.8 cm x 47.7 cm x 43.18 cm
- DIMENSIONS (Without Rack Ears):
- 7.0" x 17.4" x 17.0"
- 17.8 cm x 44.2 cm x 43.18 cm
- RU: 4
- WEIGHT: Appx 22-24 lbs (9.98-10.88 kg) per loaded enclosure
- APPROVALS: CE, UL, cUL
CATPRO RGBHV + STEREO
- SIGNAL TYPES: RGBHV + Stereo Audio
- MAXIMUM RESOLUTION: 1600x1200* (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft
- RGB IN SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Wizard)
- RGB OUT SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Receiver)
- RGB IN SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Wizard)
- RGB OUT SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Receiver)
- RGB IN/OUT IMPEDANCE: 75 Ohms
- RGB SNR: >50 dB
- RGB CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- SYNC IN IMPEDANCE: 510 Ohms
- SYNC IN/OUT POLARITY: Active High or Low (output follows input polarity)
- SYNC OUT SIGNAL LEVELS: Low = 0 V, High = +5 V (unterminated)
- AUDIO IN/OUT SIGNAL TYPE: Stereo, Unbalanced
- AUDIO IN/OUT SIGNAL LEVEL (Max.): +8 dBu
- AUDIO IN IMPEDANCE: 2k Ohms
- AUDIO OUT IMPEDANCE: <5 Ohms
- AUDIO FREQUENCY RESPONSE: <± 0.2 dB, 20 Hz to 20 kHz
- AUDIO THD+N: <0.04 %, 1 kHz, -10dBu to +4dBu
- AUDIO CROSSTALK: <-98 dB (1 kHz, Vin = +4 dBu)
- AUDIO SNR: >83 dB, 20 Hz to 20 kHz Vin= +4dBu
- AUDIO OUT VOLUME ADJ. RANGE: +6 dB to Mute (user adjustable at CatPro Receiver)
- RGBHV + STEREO IN/OUT CONNECTOR: Female RJ-45
- COMPATIBLE CABLE TYPES: Category Cable 5, 5e, 6, 6e, Skew Free UTP, and STP**
- * Signals displayed using 1600x1200 resolution at 60Hz may exhibit slightly visible background noise in certain circumstances (particularly with LCD monitors)
- ** All measurements were taken using Cat5e Cable
CATPRO RGBHV (HD-15) COMPATIBLE
- INPUT/OUTPUT LEVEL (Max.): +1 V to -0.5 V
- I/O IMPENDANCE: 75 Ohms
- FREQUENCY RESPONSE: 300 MHz or better (± 3 dB)
- CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- <-30 (f = 150 MHz)
- SIGNAL TO NOISE RATIO: >60 dB (Vin = 0.7 V, 100% IRE)
- SYNC I/O LEVEL: TTL
- COMPATIBILITY: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.
CATPRO STEREO AUDIO COMPATIBLE
- INPUT LEVEL (Max.): +8 dBu, balanced
- INPUT IMPENDANCE: 18k Ohms
- OUTPUT LEVEL (Max.): +8 dBu, balanced
- OUTPUT IMPEDANCE: 50 Ohms
- FREQUENCY RESPONSE: < ±0.25 dB (20 Hz to 20 kHz)
- THD + NOISE: <0.06 % (1 kHz, -10dBu to +4dBu)
- CROSSTALK: <-95 dB (1 kHz, Vin = +4 dBu)
- SIGNAL TO NOISE RATIO: >80 dB (20 Hz to 20 kHz, Vin=+4dBu)
- INPUT GAIN ADJ. RANGE: +6 dB to -6 dB, via potentiometer
- OUTPUT VOLUMN ADJ. RANGE: +10 dB to -70 dB (muted), via software / control panel
- CONNECTOR OPTIONS: 5T
- COMPATIBILITY: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.
STANDARD AUDIO
- INPUT LEVEL (Max.): +22 dBu, balanced
- INPUT IMPENDANCE: 18k Ohms
- OUTPUT LEVEL (Max.): +22 dBu, balanced
- OUTPUT IMPEDANCE: 50 Ohms
- FREQUENCY RESPONSE: < ±0.1 dB (20 Hz to 20 kHz)
- THD + NOISE: < 0.03% (20 Hz to 20 kHz, Vin = -10 to +22 dBu), no volume control
- CROSSTALK: <-92 dB (1 kHz, Vin = +20 dBu)
- SIGNAL TO NOISE RATIO: >100 dB (20 Hz to 20 kHz, Vin = +20 dBu)
- INPUT GAIN ADJ. RANGE: +6 dB to -6 dB, via potentiometer
- OUTPUT GAIN ADJ. RANGE: +6 dB to -10 dB, via potentiometer
- OUTPUT VOLUMN ADJ. RANGE: +10 dB to -70 dB (muted), via software / control panel
- CONNECTOR OPTIONS: 3T, 5T
STANDARD VIDEO
- INPUT LEVEL (Max.): ± 1.2 Volts
- INPUT LEVEL (Max.) S-VIDEO: ± 1 Volts
- INPUT IMPENDANCE: 75 Ohms
- OUTPUT LEVEL (Max.): ± 1.2 Volts
- OUTPUT LEVEL (Max.) S-VIDEO: ± 1 Volts
- OUTPUT IMPEDANCE: 75 Ohms
- FREQUENCY RESPONSE:
- 50 MHz or better (± 3 dB)
- 20 MHz or better (± 1 dB)
- CROSSTALK: < -50 dB (f = 5 MHz)
- DIFFERENTIAL GAIN: < 0.2% or better (f = 3.58 MHz)
- DIFFERENTIAL PHASE: < 0.2° or better (f = 3.58 MHz)
- SIGNAL TO NOISE RATIO: > 65 dB (Vin = 0.7 V, 100% IRE)
- CONNECTOR OPTIONS: BNC, S-Video (4 pin mini-DIN)
WIDEBAND VIDEO
- INPUT LEVEL (Max.): ± 1.75 Volts
- INPUT IMPENDANCE: 75 Ohms
- OUTPUT LEVEL: ± 1.75 Volts
- OUTPUT IMPEDANCE: 75 Ohms
- FREQUENCY RESPONSE:
- 300 MHz or better (± 3 dB)
- 200 MHz or better (± 1.5 dB)
- 60 MHz or better (± 1 dB)
- CROSSTALK:
- < -60 dB (f = 5 MHz)
- < -30 dB (f = 150 MHz)
- SIGNAL TO NOISE RATIO: > 60 dB (Vin = 0.7 V, 100% IRE)
- CONNECTORS: BNC
EXAMPLE CONFIGURATIONS
- This enclosure is fully populated with RJ-45 input / output boards to receive, route, and transmit 32 x 32 RGBHV + stereo signals.
- This enclosure is fully populated with HD-15 and Phoenix style boards to route 16 x 16 RGBHV + stereo signals.
- This enclosure is fully populated with a combination of RJ-45, HD-15, and Phoenix style boards to route 24 x 24 RGBHV + stereo signals. And again, with the flexibility of this system any input can be routed to any combination of RJ-45 and HD-15 / Phoenix outputs.
BoardConfig Applications (RGBHV-DVI Wizard, RGBHV-Optical Wizard, CatPro Wizard) allow you to easily set the signal conversion and tuning parameters for our signal conversion and transmission products. It displays a set of configuration elements that are individually adjusted in 'real-time' using a simple slider user interface control.
Skew Test Patterns are resolution specific test patterns that assist the user in adjusting for cable length and compensating for skew.
Illustrated CatPro wiring diagrams.
AVS-MD-BLGB-PRO
I/O RANGE
- INPUTS: 32 Catpro RX
- OUTPUTS: 16 Local
Receive, route, and transmit uncompressed RGBHV + stereo over category cable without worrying about exact cable measurements or readjusting gain, peak, and skew when routing signal paths of various lengths.
For even more flexibility, combine CAT-5, HD-15, and stereo audio boards in the same system-and route between them with ease.
For product assistance, configuration, or pricing please contact us at 509.235.2635 or 800.622.0246, or e-mail APGSales@amx.com.
FEATURES
- Resolutions up to 1600x1200 @ 60 Hz and 1920x1080 @ 60 Hz
- Compatible with UTP and STP category cable (5, 5e, 6, 6e ...)
- Intuitive gain, peak, and skew adjustments with the CatPro Software Wizard
- CAT-5 signal paths up to 1,000 feet (total signal path before and after the router)
- Standard RS-232/422 control port
- Supports AutoPatch simple BCS serial control protocol
- Ships with free APControl software
- Breakaway to route audio, audio follow video, or video
- Rack mounting ears included
- Customizable
- Remote control options available
- TCP/IP control available via an external module
GENERAL
- AC POWER: 100-240 VAC (50-60 Hz)
- POWER CONSUMPTION (Max.): 520 Watts per enclosure
- POWER CONSUMPTION (Typical): 255 Watts per enclosure
- OPERATIONAL TEMPERATURE: 32° to 110° F (0° to 43° C)
- HUMIDITY: 0 to 90% non-condensing
- DIMENSIONS (With Rack Ears):
- 7.0" x 18.8" x 17.0"
- 17.8 cm x 47.7 cm x 43.18 cm
- DIMENSIONS (Without Rack Ears):
- 7.0" x 17.4" x 17.0"
- 17.8 cm x 44.2 cm x 43.18 cm
- RU: 4
- WEIGHT: Appx 22-24 lbs (9.98-10.88 kg) per loaded enclosure
- APPROVALS: CE, UL, cUL
CATPRO RGBHV + STEREO
- SIGNAL TYPES: RGBHV + Stereo Audio
- MAXIMUM RESOLUTION: 1600x1200* (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft
- RGB IN SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Wizard)
- RGB OUT SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Receiver)
- RGB IN SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Wizard)
- RGB OUT SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Receiver)
- RGB IN/OUT IMPEDANCE: 75 Ohms
- RGB SNR: >50 dB
- RGB CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- SYNC IN IMPEDANCE: 510 Ohms
- SYNC IN/OUT POLARITY: Active High or Low (output follows input polarity)
- SYNC OUT SIGNAL LEVELS: Low = 0 V, High = +5 V (unterminated)
- AUDIO IN/OUT SIGNAL TYPE: Stereo, Unbalanced
- AUDIO IN/OUT SIGNAL LEVEL (Max.): +8 dBu
- AUDIO IN IMPEDANCE: 2k Ohms
- AUDIO OUT IMPEDANCE: <5 Ohms
- AUDIO FREQUENCY RESPONSE: <± 0.2 dB, 20 Hz to 20 kHz
- AUDIO THD+N: <0.04 %, 1 kHz, -10dBu to +4dBu
- AUDIO CROSSTALK: <-98 dB (1 kHz, Vin = +4 dBu)
- AUDIO SNR: >83 dB, 20 Hz to 20 kHz Vin= +4dBu
- AUDIO OUT VOLUME ADJ. RANGE: +6 dB to Mute (user adjustable at CatPro Receiver)
- RGBHV + STEREO IN/OUT CONNECTOR: Female RJ-45
- COMPATIBLE CABLE TYPES: Category Cable 5, 5e, 6, 6e, Skew Free UTP, and STP**
- * Signals displayed using 1600x1200 resolution at 60Hz may exhibit slightly visible background noise in certain circumstances (particularly with LCD monitors)
- ** All measurements were taken using Cat5e Cable
CATPRO RGBHV (HD-15) COMPATIBLE
- INPUT/OUTPUT LEVEL (Max.): +1 V to -0.5 V
- I/O IMPENDANCE: 75 Ohms
- FREQUENCY RESPONSE: 300 MHz or better (± 3 dB)
- CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- <-30 (f = 150 MHz)
- SIGNAL TO NOISE RATIO: >60 dB (Vin = 0.7 V, 100% IRE)
- SYNC I/O LEVEL: TTL
- COMPATIBILITY: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.
CATPRO STEREO AUDIO COMPATIBLE
- INPUT LEVEL (Max.): +8 dBu, balanced
- INPUT IMPENDANCE: 18k Ohms
- OUTPUT LEVEL (Max.): +8 dBu, balanced
- OUTPUT IMPEDANCE: 50 Ohms
- FREQUENCY RESPONSE: < ±0.25 dB (20 Hz to 20 kHz)
- THD + NOISE: <0.06 % (1 kHz, -10dBu to +4dBu)
- CROSSTALK: <-95 dB (1 kHz, Vin = +4 dBu)
- SIGNAL TO NOISE RATIO: >80 dB (20 Hz to 20 kHz, Vin=+4dBu)
- INPUT GAIN ADJ. RANGE: +6 dB to -6 dB, via potentiometer
- OUTPUT VOLUMN ADJ. RANGE: +10 dB to -70 dB (muted), via software / control panel
- CONNECTOR OPTIONS: 5T
- COMPATIBILITY: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.
STANDARD AUDIO
- INPUT LEVEL (Max.): +22 dBu, balanced
- INPUT IMPENDANCE: 18k Ohms
- OUTPUT LEVEL (Max.): +22 dBu, balanced
- OUTPUT IMPEDANCE: 50 Ohms
- FREQUENCY RESPONSE: < ±0.1 dB (20 Hz to 20 kHz)
- THD + NOISE: < 0.03% (20 Hz to 20 kHz, Vin = -10 to +22 dBu), no volume control
- CROSSTALK: <-92 dB (1 kHz, Vin = +20 dBu)
- SIGNAL TO NOISE RATIO: >100 dB (20 Hz to 20 kHz, Vin = +20 dBu)
- INPUT GAIN ADJ. RANGE: +6 dB to -6 dB, via potentiometer
- OUTPUT GAIN ADJ. RANGE: +6 dB to -10 dB, via potentiometer
- OUTPUT VOLUMN ADJ. RANGE: +10 dB to -70 dB (muted), via software / control panel
- CONNECTOR OPTIONS: 3T, 5T
STANDARD VIDEO
- INPUT LEVEL (Max.): ± 1.2 Volts
- INPUT LEVEL (Max.) S-VIDEO: ± 1 Volts
- INPUT IMPENDANCE: 75 Ohms
- OUTPUT LEVEL (Max.): ± 1.2 Volts
- OUTPUT LEVEL (Max.) S-VIDEO: ± 1 Volts
- OUTPUT IMPEDANCE: 75 Ohms
- FREQUENCY RESPONSE:
- 50 MHz or better (± 3 dB)
- 20 MHz or better (± 1 dB)
- CROSSTALK: < -50 dB (f = 5 MHz)
- DIFFERENTIAL GAIN: < 0.2% or better (f = 3.58 MHz)
- DIFFERENTIAL PHASE: < 0.2° or better (f = 3.58 MHz)
- SIGNAL TO NOISE RATIO: > 65 dB (Vin = 0.7 V, 100% IRE)
- CONNECTOR OPTIONS: BNC, S-Video (4 pin mini-DIN)
WIDEBAND VIDEO
- INPUT LEVEL (Max.): ± 1.75 Volts
- INPUT IMPENDANCE: 75 Ohms
- OUTPUT LEVEL: ± 1.75 Volts
- OUTPUT IMPEDANCE: 75 Ohms
- FREQUENCY RESPONSE:
- 300 MHz or better (± 3 dB)
- 200 MHz or better (± 1.5 dB)
- 60 MHz or better (± 1 dB)
- CROSSTALK:
- < -60 dB (f = 5 MHz)
- < -30 dB (f = 150 MHz)
- SIGNAL TO NOISE RATIO: > 60 dB (Vin = 0.7 V, 100% IRE)
- CONNECTORS: BNC
EXAMPLE CONFIGURATIONS
- This enclosure is fully populated with RJ-45 input / output boards to receive, route, and transmit 32 x 32 RGBHV + stereo signals.
- This enclosure is fully populated with HD-15 and Phoenix style boards to route 16 x 16 RGBHV + stereo signals.
- This enclosure is fully populated with a combination of RJ-45, HD-15, and Phoenix style boards to route 24 x 24 RGBHV + stereo signals. And again, with the flexibility of this system any input can be routed to any combination of RJ-45 and HD-15 / Phoenix outputs.
BoardConfig Applications (RGBHV-DVI Wizard, RGBHV-Optical Wizard, CatPro Wizard) allow you to easily set the signal conversion and tuning parameters for our signal conversion and transmission products. It displays a set of configuration elements that are individually adjusted in 'real-time' using a simple slider user interface control.
Skew Test Patterns are resolution specific test patterns that assist the user in adjusting for cable length and compensating for skew.
Illustrated CatPro wiring diagrams.
AVS-MD-GBBL-PRO
I/O RANGE
- INPUTS: 16 Local
- OUTPUTS: 32 Catpro TX
Receive, route, and transmit uncompressed RGBHV + stereo over category cable without worrying about exact cable measurements or readjusting gain, peak, and skew when routing signal paths of various lengths.
For even more flexibility, combine CAT-5, HD-15, and stereo audio boards in the same system-and route between them with ease.
For product assistance, configuration, or pricing please contact us at 509.235.2635 or 800.622.0246, or e-mail APGSales@amx.com.
FEATURES
- Resolutions up to 1600x1200 @ 60 Hz and 1920x1080 @ 60 Hz
- Compatible with UTP and STP category cable (5, 5e, 6, 6e ...)
- Intuitive gain, peak, and skew adjustments with the CatPro Software Wizard
- CAT-5 signal paths up to 1,000 feet (total signal path before and after the router)
- Standard RS-232/422 control port
- Supports AutoPatch simple BCS serial control protocol
- Ships with free APControl software
- Breakaway to route audio, audio follow video, or video
- Rack mounting ears included
- Customizable
- Remote control options available
- TCP/IP control available via an external module
GENERAL
- AC POWER: 100-240 VAC (50-60 Hz)
- POWER CONSUMPTION (Max.): 520 Watts per enclosure
- POWER CONSUMPTION (Typical): 255 Watts per enclosure
- OPERATIONAL TEMPERATURE: 32° to 110° F (0° to 43° C)
- HUMIDITY: 0 to 90% non-condensing
- DIMENSIONS (With Rack Ears):
- 7.0" x 18.8" x 17.0"
- 17.8 cm x 47.7 cm x 43.18 cm
- DIMENSIONS (Without Rack Ears):
- 7.0" x 17.4" x 17.0"
- 17.8 cm x 44.2 cm x 43.18 cm
- RU: 4
- WEIGHT: Appx 22-24 lbs (9.98-10.88 kg) per loaded enclosure
- APPROVALS: CE, UL, cUL
CATPRO RGBHV + STEREO
- SIGNAL TYPES: RGBHV + Stereo Audio
- MAXIMUM RESOLUTION: 1600x1200* (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft
- RGB IN SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Wizard)
- RGB OUT SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Receiver)
- RGB IN SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Wizard)
- RGB OUT SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Receiver)
- RGB IN/OUT IMPEDANCE: 75 Ohms
- RGB SNR: >50 dB
- RGB CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- SYNC IN IMPEDANCE: 510 Ohms
- SYNC IN/OUT POLARITY: Active High or Low (output follows input polarity)
- SYNC OUT SIGNAL LEVELS: Low = 0 V, High = +5 V (unterminated)
- AUDIO IN/OUT SIGNAL TYPE: Stereo, Unbalanced
- AUDIO IN/OUT SIGNAL LEVEL (Max.): +8 dBu
- AUDIO IN IMPEDANCE: 2k Ohms
- AUDIO OUT IMPEDANCE: <5 Ohms
- AUDIO FREQUENCY RESPONSE: <± 0.2 dB, 20 Hz to 20 kHz
- AUDIO THD+N: <0.04 %, 1 kHz, -10dBu to +4dBu
- AUDIO CROSSTALK: <-98 dB (1 kHz, Vin = +4 dBu)
- AUDIO SNR: >83 dB, 20 Hz to 20 kHz Vin= +4dBu
- AUDIO OUT VOLUME ADJ. RANGE: +6 dB to Mute (user adjustable at CatPro Receiver)
- RGBHV + STEREO IN/OUT CONNECTOR: Female RJ-45
- COMPATIBLE CABLE TYPES: Category Cable 5, 5e, 6, 6e, Skew Free UTP, and STP**
- * Signals displayed using 1600x1200 resolution at 60Hz may exhibit slightly visible background noise in certain circumstances (particularly with LCD monitors)
- ** All measurements were taken using Cat5e Cable
CATPRO RGBHV (HD-15) COMPATIBLE
- INPUT/OUTPUT LEVEL (Max.): +1 V to -0.5 V
- I/O IMPENDANCE: 75 Ohms
- FREQUENCY RESPONSE: 300 MHz or better (± 3 dB)
- CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- <-30 (f = 150 MHz)
- SIGNAL TO NOISE RATIO: >60 dB (Vin = 0.7 V, 100% IRE)
- SYNC I/O LEVEL: TTL
- COMPATIBILITY: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.
CATPRO STEREO AUDIO COMPATIBLE
- INPUT LEVEL (Max.): +8 dBu, balanced
- INPUT IMPENDANCE: 18k Ohms
- OUTPUT LEVEL (Max.): +8 dBu, balanced
- OUTPUT IMPEDANCE: 50 Ohms
- FREQUENCY RESPONSE: < ±0.25 dB (20 Hz to 20 kHz)
- THD + NOISE: <0.06 % (1 kHz, -10dBu to +4dBu)
- CROSSTALK: <-95 dB (1 kHz, Vin = +4 dBu)
- SIGNAL TO NOISE RATIO: >80 dB (20 Hz to 20 kHz, Vin=+4dBu)
- INPUT GAIN ADJ. RANGE: +6 dB to -6 dB, via potentiometer
- OUTPUT VOLUMN ADJ. RANGE: +10 dB to -70 dB (muted), via software / control panel
- CONNECTOR OPTIONS: 5T
- COMPATIBILITY: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.
STANDARD AUDIO
- INPUT LEVEL (Max.): +22 dBu, balanced
- INPUT IMPENDANCE: 18k Ohms
- OUTPUT LEVEL (Max.): +22 dBu, balanced
- OUTPUT IMPEDANCE: 50 Ohms
- FREQUENCY RESPONSE: < ±0.1 dB (20 Hz to 20 kHz)
- THD + NOISE: < 0.03% (20 Hz to 20 kHz, Vin = -10 to +22 dBu), no volume control
- CROSSTALK: <-92 dB (1 kHz, Vin = +20 dBu)
- SIGNAL TO NOISE RATIO: >100 dB (20 Hz to 20 kHz, Vin = +20 dBu)
- INPUT GAIN ADJ. RANGE: +6 dB to -6 dB, via potentiometer
- OUTPUT GAIN ADJ. RANGE: +6 dB to -10 dB, via potentiometer
- OUTPUT VOLUMN ADJ. RANGE: +10 dB to -70 dB (muted), via software / control panel
- CONNECTOR OPTIONS: 3T, 5T
STANDARD VIDEO
- INPUT LEVEL (Max.): ± 1.2 Volts
- INPUT LEVEL (Max.) S-VIDEO: ± 1 Volts
- INPUT IMPENDANCE: 75 Ohms
- OUTPUT LEVEL (Max.): ± 1.2 Volts
- OUTPUT LEVEL (Max.) S-VIDEO: ± 1 Volts
- OUTPUT IMPEDANCE: 75 Ohms
- FREQUENCY RESPONSE:
- 50 MHz or better (± 3 dB)
- 20 MHz or better (± 1 dB)
- CROSSTALK: < -50 dB (f = 5 MHz)
- DIFFERENTIAL GAIN: < 0.2% or better (f = 3.58 MHz)
- DIFFERENTIAL PHASE: < 0.2° or better (f = 3.58 MHz)
- SIGNAL TO NOISE RATIO: > 65 dB (Vin = 0.7 V, 100% IRE)
- CONNECTOR OPTIONS: BNC, S-Video (4 pin mini-DIN)
WIDEBAND VIDEO
- INPUT LEVEL (Max.): ± 1.75 Volts
- INPUT IMPENDANCE: 75 Ohms
- OUTPUT LEVEL: ± 1.75 Volts
- OUTPUT IMPEDANCE: 75 Ohms
- FREQUENCY RESPONSE:
- 300 MHz or better (± 3 dB)
- 200 MHz or better (± 1.5 dB)
- 60 MHz or better (± 1 dB)
- CROSSTALK:
- < -60 dB (f = 5 MHz)
- < -30 dB (f = 150 MHz)
- SIGNAL TO NOISE RATIO: > 60 dB (Vin = 0.7 V, 100% IRE)
- CONNECTORS: BNC
EXAMPLE CONFIGURATIONS
- This enclosure is fully populated with RJ-45 input / output boards to receive, route, and transmit 32 x 32 RGBHV + stereo signals.
- This enclosure is fully populated with HD-15 and Phoenix style boards to route 16 x 16 RGBHV + stereo signals.
- This enclosure is fully populated with a combination of RJ-45, HD-15, and Phoenix style boards to route 24 x 24 RGBHV + stereo signals. And again, with the flexibility of this system any input can be routed to any combination of RJ-45 and HD-15 / Phoenix outputs.
BoardConfig Applications (RGBHV-DVI Wizard, RGBHV-Optical Wizard, CatPro Wizard) allow you to easily set the signal conversion and tuning parameters for our signal conversion and transmission products. It displays a set of configuration elements that are individually adjusted in 'real-time' using a simple slider user interface control.
Skew Test Patterns are resolution specific test patterns that assist the user in adjusting for cable length and compensating for skew.
Illustrated CatPro wiring diagrams.
AVS-MD-DGDG-PRO
I/O RANGE
- INPUTS: 8 Local, 16 Catpro RX
- OUTPUTS: 8 Local, 16 Catpro TX
Receive, route, and transmit uncompressed RGBHV + stereo over category cable without worrying about exact cable measurements or readjusting gain, peak, and skew when routing signal paths of various lengths.
For even more flexibility, combine CAT-5, HD-15, and stereo audio boards in the same system-and route between them with ease.
For product assistance, configuration, or pricing please contact us at 509.235.2635 or 800.622.0246, or e-mail APGSales@amx.com.
FEATURES
- Resolutions up to 1600x1200 @ 60 Hz and 1920x1080 @ 60 Hz
- Compatible with UTP and STP category cable (5, 5e, 6, 6e ...)
- Intuitive gain, peak, and skew adjustments with the CatPro Software Wizard
- CAT-5 signal paths up to 1,000 feet (total signal path before and after the router)
- Standard RS-232/422 control port
- Supports AutoPatch simple BCS serial control protocol
- Ships with free APControl software
- Breakaway to route audio, audio follow video, or video
- Rack mounting ears included
- Customizable
- Remote control options available
- TCP/IP control available via an external module
GENERAL
- AC POWER: 100-240 VAC (50-60 Hz)
- POWER CONSUMPTION (Max.): 520 Watts per enclosure
- POWER CONSUMPTION (Typical): 255 Watts per enclosure
- OPERATIONAL TEMPERATURE: 32° to 110° F (0° to 43° C)
- HUMIDITY: 0 to 90% non-condensing
- DIMENSIONS (With Rack Ears):
- 7.0" x 18.8" x 17.0"
- 17.8 cm x 47.7 cm x 43.18 cm
- DIMENSIONS (Without Rack Ears):
- 7.0" x 17.4" x 17.0"
- 17.8 cm x 44.2 cm x 43.18 cm
- RU: 4
- WEIGHT: Appx 22-24 lbs (9.98-10.88 kg) per loaded enclosure
- APPROVALS: CE, UL, cUL
CATPRO RGBHV + STEREO
- SIGNAL TYPES: RGBHV + Stereo Audio
- MAXIMUM RESOLUTION: 1600x1200* (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft
- RGB IN SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Wizard)
- RGB OUT SIGNAL LEVEL RANGE (Max.): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Receiver)
- RGB IN SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Wizard)
- RGB OUT SKEW ADJUSTMENT: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Receiver)
- RGB IN/OUT IMPEDANCE: 75 Ohms
- RGB SNR: >50 dB
- RGB CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- SYNC IN IMPEDANCE: 510 Ohms
- SYNC IN/OUT POLARITY: Active High or Low (output follows input polarity)
- SYNC OUT SIGNAL LEVELS: Low = 0 V, High = +5 V (unterminated)
- AUDIO IN/OUT SIGNAL TYPE: Stereo, Unbalanced
- AUDIO IN/OUT SIGNAL LEVEL (Max.): +8 dBu
- AUDIO IN IMPEDANCE: 2k Ohms
- AUDIO OUT IMPEDANCE: <5 Ohms
- AUDIO FREQUENCY RESPONSE: <± 0.2 dB, 20 Hz to 20 kHz
- AUDIO THD+N: <0.04 %, 1 kHz, -10dBu to +4dBu
- AUDIO CROSSTALK: <-98 dB (1 kHz, Vin = +4 dBu)
- AUDIO SNR: >83 dB, 20 Hz to 20 kHz Vin= +4dBu
- AUDIO OUT VOLUME ADJ. RANGE: +6 dB to Mute (user adjustable at CatPro Receiver)
- RGBHV + STEREO IN/OUT CONNECTOR: Female RJ-45
- COMPATIBLE CABLE TYPES: Category Cable 5, 5e, 6, 6e, Skew Free UTP, and STP**
- * Signals displayed using 1600x1200 resolution at 60Hz may exhibit slightly visible background noise in certain circumstances (particularly with LCD monitors)
- ** All measurements were taken using Cat5e Cable
CATPRO RGBHV (HD-15) COMPATIBLE
- INPUT/OUTPUT LEVEL (Max.): +1 V to -0.5 V
- I/O IMPENDANCE: 75 Ohms
- FREQUENCY RESPONSE: 300 MHz or better (± 3 dB)
- CROSSTALK:
- <-50 (f = 5 MHz)
- <-35 (f = 30 MHz)
- <-30 (f = 150 MHz)
- SIGNAL TO NOISE RATIO: >60 dB (Vin = 0.7 V, 100% IRE)
- SYNC I/O LEVEL: TTL
- COMPATIBILITY: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.
CATPRO STEREO AUDIO COMPATIBLE
- INPUT LEVEL (Max.): +8 dBu, balanced
- INPUT IMPENDANCE: 18k Ohms
- OUTPUT LEVEL (Max.): +8 dBu, balanced
- OUTPUT IMPEDANCE: 50 Ohms
- FREQUENCY RESPONSE: < ±0.25 dB (20 Hz to 20 kHz)
- THD + NOISE: <0.06 % (1 kHz, -10dBu to +4dBu)
- CROSSTALK: <-95 dB (1 kHz, Vin = +4 dBu)
- SIGNAL TO NOISE RATIO: >80 dB (20 Hz to 20 kHz, Vin=+4dBu)
- INPUT GAIN ADJ. RANGE: +6 dB to -6 dB, via potentiometer
- OUTPUT VOLUMN ADJ. RANGE: +10 dB to -70 dB (muted), via software / control panel
- CONNECTOR OPTIONS: 5T
- COMPATIBILITY: These boards can be used to break int