Modula

Customizable Matrix Switchers

Multiple Analog and Digital Signal Types in Various I/O Ranges. Modular and Field-Expandable.

Custom
Configurations

TRAINING AVAILABLE
AMX University Training is available for this product. Applicable courses include:

  • Signal Management Essentials Online Training
  • Getting Started with AutoPatch Online Training
  • Signal Management Design

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

PURESYNC™ TECHNOLOGY
PureSync Technology guarantees the quickest possible rise time of the sync signal's leading edge, eliminating the possibility of video loss at the display.

COUNTRY OF ORIGIN: UNITED STATES

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

OVERVIEW
Modula Matrix Switchers are fully customizable and available in multiple enclosure types to meet the signal management needs of any mid to large size audiovisual installation. The Modula Series is designed for flexibility; input / output boards simply slide into place as needed to increase matrix size. This can be done at the time of purchase, or later in the field.

Standard Modula 32x32 3RU enclosures can accommodate up to 32 inputs and 32 outputs in a wide variety of signal styles including stereo audio, mono audio, HD-SDI, SD-SDI, RGBHV, component video (including RGBS, RGsB, RGB, YUV, Y/Pb/Pr and HDTV), Y/c, S-Video and composite video. We also have systems with integrated video transmission over twisted pair. Various signal styles can be combined in a single enclosure or enclosures can easily link together under a single control view for larger systems (for example a 32x32 composite video + stereo audio system would have 2 enclosures - one for the video and one for the audio).

Modula Series4, Modula 32x32 4RU enclosures, are designed to route RGBHV with HD-15 connections, this saves a tremendous amount of rack space as only a single HD-15 connector is used for a given RGBHV input or output - rather than 5 BNC connections.

We even have skewed enclosures to help with installations that have very uneven input / output requirements such as 16x48 or 52x12.

The video frequency response in the Modula series is a tight ±3 dB, unlike other manufacturers who specify only -3 dB to allow for the use of excessive peaking, damaging the signal, to record a wider bandwidth. Virtual matrix programming levels allow multiple enclosures to be treated as a single system, or single enclosures to be treated as multiple independent routers. And, every system can be controlled using a variety of methods including local control panel, standard RS-232/422 control port, and optional remote and TCP/IP control (TCP/IP is via our external APWeb module).

COMMON APPLICATION
With so many enclosure styles to choose from, Modula Customizable Matrix Switchers can be used anyplace multiple audio and video sources need to be routed to multiple destinations without restriction. These systems are a proven cornerstone in thousands of installations worldwide including command and control, sports bars, theaters, auditoriums, arenas, digital signage, cruise ships and much more.

CUSTOM REQUEST
AutoPatch manufacturers a full range of customizable matrix switchers to accommodate multiple signal types in various input/output ranges. Complete our custom request form today and an AMX Representative will respond to you within one business day with a custom quote. If you require immediate assistance please contact us at 800.222.0193 (US) or 469.624.7400 (International).

> Online Custom Request Form

FEATURES

  • Save money and rack space by consolidating all your signal requirements in a single matrix switching system with custom configuration
  • Select from a variety of analog audio boards, some with options for digital input gain and output volume control
  • Analog audio connections support balanced and unbalanced audio
  • Audio breakaway to route audio-follow-video, video or audio alone
  • Virtual Matrix Technology allows endless possible breakaway and "signal-follow-signal" user defined scenarios
  • Superior video crosstalk specifications ensure signal isolation and security
  • Ultra-flat video bandpass curve measured at a tight ±3 dB
  • 300 MHz bandwidth, fully-loaded worst case scenario (RGB)
  • PureSync™ Technology guarantees the quickest possible rise time of the sync signal's leading edge, eliminating the possibility of video loss at the display
  • Conforms to HD-SDI SMPTE standards including SMPTE-259M, SMPTE-292M, SMPTE-344M, and SMPTE-372M
  • Conforms to SD-SDI SMPTE standards including SMPTE-259M, and SMPTE-344M
  • HD-SDI systems / boards can also route SD-SDI
  • HD-SDI boards pass embedded audio, metadata or any additional ancillary data included in the video stream
  • HD-SDI boards support CDR (Clock Data Recovery)
  • SD-SDI boards support CDR (Clock Data Recovery)
  • SD-SDI boards provide cable equalization up to 350m
  • HD-SDI boards provide cable equalization up to 140m
  • Integrated CatPro Technology to receive, route and transmit RGBHV and stereo over twisted pair cable
  • 2 Standard RS-232 control ports
  • Supports AutoPatch's simple BCS serial control protocol
  • Optional TCP/IP control via external APWeb module
  • Choice of front mounted control or blank front panel
  • Free upgrade to a lifetime warranty available
  • Local presets allow quick recall of a pre-programmed set of switches with a single command; multiple presets can exist within a system at the same time
  • Global presets allow quick recall of a comprehensive snapshot of all switches and digital volume controls

ENCLOSURES


3 RU ENCLOSURE

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption (Max): 260 Watts
  • Power Consumption (Typical): 100 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 341, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 5 5/16" x 19" x 17"
  • 13.4 cm x 48.3 cm x 43.2 cm
  • RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 5 5/16" x 17 3/8" x 17"
  • 13.4 cm x 44.2 cm x 43.2 cm
  • RU: 3

WEIGHT

  • Appx. 22 lbs (9.98 kg) per loaded enclosure

MTBF

  • 88,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

4 RU ENCLOSURE

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption: (Max) 260 Watts
  • Power Consumption: (Typ) 105 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 358, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 7.0" x 19" x 17"
  • 17.8 cm x 48.3 cm x 43.2 cm
  • RU: 4

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 7.0" x 17 3/8" x 17"
  • 17.8 cm x 44.2 cm x 43.2 cm
  • RU: 4

WEIGHT

  • Appx. 22-24 lbs (9.98-10.88 kg) per loaded enclosure

MTBF

  • 88,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

VIDEO


HD-SDI VIDEO (BNC)

  • HD-SDI : Conforms to SMPTE-259M, SMPTE-292M, SMPTE-344M
  • Input Level (Max): 0.8 Vpp ±10%
  • Input Impedance: 75 Ohms
  • Output Level (Max): 0.8 Vpp ±10%
  • Output Impedance: 75 Ohms
  • Timing Jitter: <0.2 UI @ 1.485 Gbps
  • Alignment Jitter: <0.1 UI @ 1.485 Gbps
  • Bit Rate: 143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*, 1.485 Gbps (*Data not available for 177 & 540 Mbps bit rate)
  • Data Type: 8 bit or 10 bit
  • Auto Cable Equalization: Up to 140m of Belden 1694A or equivalent @ 1.485 Gbps
  • Auto Data Rate Lock: Yes
  • CDR (Reclocking): Yes
  • Connectors: BNC

SD-SDI VIDEO (BNC)

  • SD-SDI : Conforms to SMPTE-259M, SMPTE-344M
  • Input Level (Max): 0.8 Vpp ±10%
  • Input Impedance: 75 Ohms
  • Output Level (Max): 0.8 Vpp ±10%
  • Output Impedance: 75 Ohms
  • Timing Jitter: <0.1 UI @ 360 Mbps
  • Alignment Jitter: <0.1 UI @ 360 Mbps
  • Rise and Fall Time: 600 ps, ±100 ps
  • Bit Rate: 143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps* (*Data not available for 177 & 540 Mbps bit rate)
  • Data Type: 8 bit or 10 bit
  • Auto Cable Equalization: Up to 350m of Belden 8281 or equivalent @ 270 Mbps
  • Auto Data Rate Lock: Yes
  • CDR (Reclocking): Yes
  • Connectors: BNC

WIDEBAND VIDEO (BNC)

  • Input Level (Max): ±1.75 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±1.75 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
    • 200 MHz or better (±1.5 dB)
    • 60 MHz or better (±1 dB)
  • Crosstalk:
    • <-60 dB (f = 5 MHz)
    • <-30 dB (f = 150 MHz)
  • Signal to Noise Ratio: >60 dB (Vin = 0.7 V, 100 IRE)
  • Sync Input/Output Level: TTL
  • Connectors: BNC

SYNC (BNC)

  • Input Level: 0 V to +5 V
  • Output Level: 0 V to +5 V
  • Sync Polarity: Output follows Input
  • Connectors: BNC

WIDEBAND VIDEO (HD-15)

  • Input Level (Max): ±1.5 Volts
  • Input Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
  • Crosstalk
    • <-50 dB (f = 5 MHz)
    • <-30 dB (f = 150 MHz)
  • Signal to Noise Ratio: >60 dB (Vin = 0.7 V, 100 IRE)
  • Sync Input/Output Level: TTL
  • Connectors: HD-15
S-Video

STANDARD VIDEO

  • Input Level (Max): ±2 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±2 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 50 MHz or better (±3 dB)
    • 20 MHz or better (±1 dB)
  • Crosstalk: <-50 dB (f = 5 MHz)
  • Differential Gain: <0.2% or better (f = 3.58 MHz)
  • Differential Phase: <0.2° or better (f = 3.58 MHz)
  • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: S-Video (4-pin Mini-DIN)
Y/c, Composite

STANDARD VIDEO

  • Input Level (Max): ±2.5 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±2.5 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 50 MHz or better (±3 dB)
    • 20 MHz or better (±1 dB)
  • Crosstalk: <-50 dB (f = 5 MHz)
  • Differential Gain: <0.2% or better (f = 3.58 MHz)
  • Differential Phase: <0.2° or better (f = 3.58 MHz)
  • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: BNC

AUDIO


STANDARD AUDIO WITH DVC

  • Input Level (Max): +22 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +22 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <± 0.1 dB (20 Hz to 20 kHz)
  • THD + Noise: <0.03% (20 Hz to 20 kHz) Vin = -10 to +20 dBu
  • Crosstalk: <-95 dB (1 kHz, Vin = +20 dBu)
  • Signal to Noise Ratio: >100 dB (20 Hz to 20 kHz, Vin = +20 dBu)
  • Input Gain Adj. Range: -6 dB to +6 dB
  • Output Volume Adj. Range: +10 dB to -70 dBU (muted), via serial/control panel
  • Connectors: 5T

CATPRO


GENERAL

  • AC Power: 100-240 VAC (50-60 Hz)
  • Power Consumption (Max): 520 Watts
  • Power Consumption (Typ): 255 Watts, fully loaded enclosure
  • BTU/HR (Max): 1774
  • BTU/HR (Typ): 870, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 7" x 19" x 17"
  • 17.8 cm x 48.3 cm x 43.2 cm
  • RU: 4

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 7" x 17 3/8" x 17"
  • 17.8 cm x 44.2 cm x 43.2 cm
  • RU: 4

WEIGHT

  • Appx 22-24 lbs (9.98-10.88 kg) per loaded enclosure

MTBF

  • 88,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

CATPRO RGBHV + STEREO (RJ-45)

All Specs are defined for use in conjunction with a CatPro Transmitter and Receiver.

  • Signal Types: RGBHV + Stereo Audio
  • Maximum Resolution: 1600x1200* (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft. Overall transmission distance including input and output cannot exceed 1000 ft from source to destination.
  • RGB In Signal Level Range (Max): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Wizard)
  • RGB Out Signal Level Range (Max): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Receiver)
  • RGB In Skew Adjustment: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Wizard)
  • RGB Out Skew Adjustment: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Receiver)
  • RGB In/Out Impedance: 75 Ohms
  • RGB SNR: >50 dB
  • RGB Crosstalk:
    • <-50 (f = 5 MHz)
    • <-35 (f = 30 MHz)
  • Sync In Impedance: 510 Ohms
  • Sync In/Out Polarity: Active High or Low (output follows input polarity)
  • Sync Out Signal Levels: Low = 0 V, High = +5 V (unterminated)
  • Audio In/Out Signal Type: Stereo, Unbalanced
  • Audio In/Out Signal Level (Max): +8 dBu
  • Audio In Impedance: 2 kOhms
  • Audio Out Impedance: <5 Ohms
  • Audio Frequency Response: <± 0.2 dB, 20 Hz to 20 kHz
  • Audio THD+N: <0.04 %, 1 kHz, -10 dBu to +4 dBu
  • Audio Crosstalk: <-98 dB (1 kHz, Vin = +4 dBu)
  • Audio SNR: >83 dB, 20 Hz to 20 kHz Vin= +4dBu
  • Audio Out Volume Adj. Range: +6 dB to Mute (user adjustable at CatPro Receiver)
  • RGBHV + Stereo In/Out Connector: Female RJ-45
  • Compatible Cable Types: Category Cable 5, 5e, 6, 6e, UTP, and STP**

* Signals displayed using 1600x1200 resolution at 60Hz may exhibit slightly visible background noise in certain circumstances (particularly with LCD monitors)

** All measurements were taken using Cat5e Cable

CATPRO RGBHV (HD-15)

  • Input/Output Level (Max): +0.75 V to -0.3 V
  • I/O Impedance: 75 Ohms
  • Maximum Resolution: 1600x1200(4:3) and 1920x1080p(16:9) @ 60 Hz up to 1000 ft (Cat-5)
  • Crosstalk:
    • <-50 (f = 5 MHz)
    • <-35 (f = 30 MHz)
    • <-30 (f = 150 MHz)
  • Signal to Noise Ratio: >60 dB (Vin = 0.7 V, 100 IRE)
  • Sync I/O Level: TTL
  • Compatibility: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.

CATPRO STEREO AUDIO (PHOENIX-STYLE)

  • Input Level (Max): +8 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +8 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <±0.25 dB (20 Hz to 20 kHz)
  • THD + Noise: <0.06 % (1 kHz, -10dBu to +4dBu)
  • Crosstalk: <-95 dB (1 kHz, Vin = +4 dBu)
  • Signal to Noise Ratio: >80 dB (20 Hz to 20 kHz, Vin=+4dBu)
  • Input Gain Adj. Range: +6 dB to -6 dB, via potentiometer
  • Output Volume Adj. Range: +10 dB to -70 dB (muted), via serial/control panel
  • Connectors: 5T
  • Compatibility: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.

AMX University Training is available for this product. Applicable courses include:

  • Signal Management Essentials Online Training
  • Getting Started with AutoPatch Online Training
  • Signal Management Design

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.