NI-900

NetLinx® Integrated Controller

DescriptionNetLinx Integrated Controller
Part #FG2105-90
1 | 0 | 3 | 4
Serial • Relay • IR • Digital I/O

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • AMX Essentials (Online)
  • Getting Started with AMX (Online)
  • Control Designer
  • Quest for Power (Online)
  • Control Installer
  • Control Programmer 1
  • Getting Started with AMX Modules (Online)
  • Control Programmer 2
  • Control Programmer 3
  • Introduction to Duet (Online)
  • Building Java Modules using Café Duet

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

D-Tools Certified Product

This product can be found in the D-Tools manufacturer product database and specified as a third party device when building and proposing a system using D-Tools System Integrator software. D-Tools data includes attributes that make it easier to sell, design, and install systems including: overview, specifications, images, product documentation and more. AMX is a member of the D-Tools Manufacturer Vantage Point (MVP) program designed to provide D-Tools customers the most up-to-date product information.

COUNTRY OF ORIGIN: MEXICO

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

JITC IA CERTIFICATION

Joint Interoperability Test Command (JITC) Information Assurance certification ensures that this product can be connected to the Defense Information Systems Network, operate to maximum performance on the network and remain secure.

OVERVIEW
The NI-900 unit is designed to control and automate a variety of devices in single rooms or multiple small rooms and is capable of supporting devices with a variety of communication formats. It is configured to control a limited number of lights, thermostats, video displays and other equipment.

COMMON APPLICATION
Perfect for single rooms or two or more small rooms with a limited number of devices such as home theaters, MDUs, hotel rooms and other environments.

FEATURES

  • 1 Configurable RS-232 / RS-422 / RS-485 Serial port
  • 3 IR / Serial ports
  • 1 IR Receiver Port
  • 4 Digital I/O ports
  • 2 Communication Networks: AxLink and Ethernet (TCP/IP)
  • 304 MIPS processor speeds
  • 64 MB RAM
  • 32 MB Flash Memory
  • 512 KB Non-Volatile Memory
  • AMX Device Discovery enabled
  • JITC Compliant

SPECIFICATIONS

DIMENSIONS (HWD)

  • 1 9/16" x 5 9/16" x 5 1/8" (4.01 cm x 14.10 cm x 13 cm)
  • RU: 1

WEIGHT
1.30 lbs (590 g)

POWER

  • 300 mA @ 12 VDC
  • Power requirements are usage dependant

ENCLOSURE
Metal with black matte finish

ONBOARD MASTER
304 MIPS

CERTIFICATIONS
FCC Part 15 Class B, CE, and IEC 60950

FRONT PANEL COMPONENTS

  • Program Port
  • Configuration DIP Switch: Sets the communication parameters for the Program port
  • IR RX LED: Red LED lights when IR data is being received via the rear IR RX port
  • IR LEDs: Three red LEDs light during the transmission of IR or Serial data via the rear IR port
  • I/O LEDs: Four yellow LEDs light when the rear I/O channels 1 - 4 are active. LED indicator for each I/O port reflects the state of that particular port
  • Serial LEDs
  • LINK/ACT: Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
  • Status: Green LED lights when the Controller is programmed and communicating properly
  • Output: Red LED lights when the Controller transmits data, sets channels sends data strings, etc.
  • Input: Yellow LED lights when the Controller receives data from button pushes, strings, commands, channel levels, etc.
  • ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device

REAR PANEL CONNECTORS

  • RS-232/422/485 (Port 1)
  • IR RX (Port 6)
  • Digital I/O (Port 5)
  • IR/Serial (Ports 2-4)
  • AxLink LED
  • AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector provides data and power to external control devices
  • Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
  • Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector

ENVIRONMENTAL

  • Operating Temperature: 0° C (32° F) to 50° C (122° F)
  • Operating Humidity: 20% to 85% RH
  • Heat Dissipation (Typical): 12.3 BTU/hr

INCLUDED ACCESSORIES

  • 2-pin 3.5 mm mini-Phoenix female PWR connector (41-5025)
  • 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
  • Three CC-NIRC IR Emitters
  • Two 4-pin 3.5 mm mini-Phoenix female connectors (41-5047)



(Click here for larger PDF image)

Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • AMX Essentials (Online)
  • Getting Started with AMX (Online)
  • Control Designer
  • Quest for Power (Online)
  • Control Installer
  • Control Programmer 1
  • Getting Started with AMX Modules (Online)
  • Control Programmer 2
  • Control Programmer 3
  • Introduction to Duet (Online)
  • Building Java Modules using Café Duet

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

NAME DESCRIPTION PART #
IRX-PP38 Plasma Proof IR Sensor (FG460)
PSN6.5 6.5 A Power Supply (F423-41)
PSN4.4 4.4 A Power Supply (F423-45)
AC-RK Accessory Rack Kit (FG515)
AC-SMB Surface Mounting Bracket (FG525)
AC-PMB Pole Mounting Bracket (FG531)
CC-232 RS-232/422 Cables (FG10-752-04)
CC-NIRC IR Cables (FG10-000-11)