NXF-MINI NetLinx® Mini-CardFrame (CardFrame Only)

OVERVIEW
The NetLinx Mini-CardFrame features front access to four expansion slots that accept any combination of compatible NetLinx Controller Cards. In addition to being compatible with the ME260/64 Master Card, NI-2100, NI-3100 and the NI-4100 NetLinx Controllers, the Mini-CardFrame extends the control capabilities of the AMX NetLinx Control System to a remote area or location up to 1,000 feet away through the power of the ICSNet data/power bus.

COMMON APPLICATION
The NXF-MINI NetLinx Mini-CardFrame is ideal for expansion for distributed systems needing additional IR, Relay, and Volume Control capabilities.

SPECIFICATIONS

DIMENSIONS (HWD)

  • 1 3/4” x 17” x 9 9/16” (4.5 cm x 43.2 cm x 24.3 cm) (width does not include mounting ears)
  • RU: 1

WEIGHT
6.2 lbs (2.8 kg)

POWER REQUIREMENT
25 mA @ 12 VDC

ENCLOSURE
Metal with black matte finish

FRONT PANEL COMPONENTS

  • NetLinx Control Card Slots 1- 4: Accept up to 4 compatible NetLinx Cards: such as the NXC-COM2, NXC-I/O10, etc.
  • Rack-mount brackets: Provides an installation option for the NXF-MINI to be mounted into an equipment rack

REAR PANEL CONNECTORS

  • CardFrame Number DIP Switch: Sets the starting address for the Control Cards in the CardFrame. The 8-position DIP switch address range is 1-3064. (Factory default CardFrame DIP switch value = 0). The Control Card address range is 1-3064
  • NetLinx Control Card Connectors (1-4): Four 20-pin (male) connectors that bridge the gap between the Control Cards in the CardFrame and external equipment
  • ICSNet Connector: Single RJ-45 connector for ICSNet interface
  • Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector

INCLUDED ACCESSORIES

  • Removable rack ear set (62-2104-03). Allows for tabletop, under-counter, and front/rear rack mounting
  • Three faceplate screws (80-0181)
  • One 2-pin mini-Phoenix PWR connector (41-5025)
  • Installation Kit (KA2104)
/assets/coolIcons/didYouKnow.png

QUICK TIP
For additional expandability needs, multiple NetLinx Mini-CardFrames can be connected using ICSNet Hubs.

 MX NXF-MINI Products default.asp Central ControllerscategoryCentralControllers.asp NXF-MINI NXF-MINI.asp FG2104 NetLinx Mini-CardFrame (CardFrame Only)
2006-03-24 Central Controllers NetLinx Mini-CardFrame /techdocs/datasheets/NetLinxMiniCardFrameDS.pdf _blank PDF de /de/assets/downloadbereich/NXF-MINI.datenblatt.pdf _blank NXF-MINI Pictorial (95) Drawings NXF-MINI NetLinx Mini CardFrame /techdocs/952104.pdf _blank PDF /techdocs/endwgs/952104.dxf _blank DXF NXF-MINI Central Controllers NXF-MINI - Front /assets/logosAndPhotos/NXF-MINI-Front.png /assets/logosAndPhotos/thumbnails/NXF-MINI-Front.jpg _blank PNG | 1.80 MB NXF-MINI 2 Central Controllers NXF-MINI - Rear /assets/logosAndPhotos/NXF-MINI-Rear.png /assets/logosAndPhotos/thumbnails/NXF-MINI-Rear.jpg _blank PNG | 2.07 MB NXF-MINI 2 2009-01-16 Central Controllers Installation Guide - NXF-MINI NetLinx Mini-CardFrame (CardFrame Only) /techdocs/NXF-MINI.InstallationGuide.pdf _blank 2009-01-16 REV D PDF | 179 KB NXF-MINI PSN6.5 6.5 A Power Supply FG423-41 PSN6.5.asp _self NXC-COM2 Dual COM Port Control Card FG2022 NXC-COM2.asp _self NXC-I/O10 Input/Output Control Card FG2021 NXC-I-O10.asp _self NXC-IRS4 4-Port IR/S Control Card FG2023 NXC-IRS4.asp _self NXC-REL10 Relay Control Card FG2020 NXC-REL10.asp _self NXC-VAI4 Voltage Output/Analog Input Control Card FG2025 NXC-VAI4.asp _self NXC-VOL4 Volume Control Card FG2024 NXC-VOL4.asp _self