NXP-CPI16 NetLinx® Custom Panel Interface

OVERVIEW
The NetLinx Custom Panel Interface provides a direct ICSNet connection to custom control panels. It’s pin-for-pin compatible with devices that were designed for use with the AXP-CPI16 card (designed for integration with an Axcess Control System). Two 20-pin headers provide ribbon cable wiring or direct-connect insertion to circuit boards, providing inputs for up to 16 closures and 16 feedback outputs for LEDs. Under software control, the LED outputs can act as drivers to 8-segment bargraphs or as discrete outputs for feedback. In addition, the NXC-CPI16 also includes two quadrature inputs for mechanical or optical rotary encoders, used to control variable levels such as volume and lights, or lens focus and zoom.

COMMON APPLICATION
The NXP-CPI16 is a versatile, useful device for both custom panel and contact-closure applications.

FEATURES

  • Integrates custom panels with 16 closure inputs and 16 LED outputs; pin-for-pin compatible with panels designed for AXP-CPI16
  • Operates as a low-cost closure interface
  • Acts as a driver for up to two 8-segment LED bargraphs; each bargraph uses eight of the 16 LED outputs
  • Allows precision digital control of up to two levels from quadrature inputs
  • Accepts mechanical or optical rotary encoders
  • Offers programmable level response, provides software-driven performance adjustment and switchable coarse/fine level control

SPECIFICATIONS

DIMENSIONS (HWD)
2 3/4” x 1 7/8” x 1 3/8” (7.0 cm x 4.7 cm x 3.6 cm)

WEIGHT

  • Device: 8.10 oz (229.6 g)
  • Total Shipping: 1 lb (453.6 g)

POWER 12 VDC; maximum draw of 300 mA

INPUT CONNECTORS

  • Indicator power: Two-pin 3.5 mm captive wire
  • I/O Headers: Two 20-pin headers, 8 I/O channels each (16 closure inputs activated with GND or TTL Low (< 0.8 V). Open collector outputs (0-28 VDC). Inputs are sampled approximately every 10 msec
  • Rotary Encoder inputs: 2 Quadrature inputs on a 2 x 3 header (6-pin), two encoder inputs (4-pin) with a +5 V supply pin (supplying up to 100 mA) and a GND pin

ICSNET

  • Two RJ-45 connectors for ICSNet connection ID BUTTON
  • Generates an event from the CPI16 to allow you to assign new device numbers using the ID mode in NetLinx Studio

LED
ICSP status indicator (green)

OPEN COLLECTOR OUTPUTS
16-open collector outputs, acting as a switch to ground, up to 100 mA. Outputs can be connected to voltages ranging between 0 and + 28 V. Each output is updated every 10 msec

INCLUDED ACCESSORIES

  • 6-pin header with 3 feet (0.914) of ribbon cable
  • Two mating 20-pin headers, each with 3 feet of ribbon cable attached
  • One green 2-pin 3.5 mm pitch captive wire connector for external indicator power
/assets/coolIcons/gsa.png

GSA

This product has been approved by the U.S. Government’s General Services Administration to be specified for use in government installations.

 NXP-CPI16 Products default.asp Keypads categoryKeypads.asp NXP-CPI16 NXP-CPI16.asp FG2410 NetLinx Custom Panel Interface
2006-12-18 Central Controllers NXP-CPI16 NetLinx Custom Panel Interface /techdocs/datasheets/NXP-CPI16.Datasheet.pdf _blank PDF | 168 KB NXP-CPI16 Pictorial (95) Drawings NXP-CPI16 NetLinx Custom Panel Interface /techdocs/95241001.pdf _blank PDF /techdocs/endwgs/95241001.dxf _blank DXF NXP-CPI16 Keypads NXP-CPI16 /assets/logosAndPhotos/NXP-CPI16.png /assets/logosAndPhotos/thumbnails/NXP-CPI16.jpg _blank PNG | 2.36 MB NXP-CPI16 3 2009-01-16 Keypads Operation/Reference Guide - NXP-CPI16 NetLinx Custom Panel Interface /techdocs/NXP-CPI16.OperationReferenceGuide.pdf _blank 2009-01-16 REV B PDF | 288 KB NXP-CPI16