Optima

Pre-Engineered Matrix Switchers

RGBHV Video with BNC, Stereo Audio with 5T Phoenix-style and Digital Volume Control

Description
16x24, RGBHV BNC, Stereo 5T, DVC
Model--
Part # --
Stereo | RGBHV
Audio • Video

TRAINING AVAILABLE
AMX University Training is available for this product. Applicable courses include:

  • Signal Management Essentials Online Training
  • Getting Started with AutoPatch Online Training
  • AutoPatch Optima Online Training
  • Signal Management Design

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

PURESYNC™ TECHNOLOGY
PureSync Technology guarantees the quickest possible rise time of the sync signal's leading edge, eliminating the possibility of video loss at the display.

COUNTRY OF ORIGIN: UNITED STATES

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

OVERVIEW
Optima RGBHV with BNC matrix switchers are ideal if you prefer BNC connections over HD-15 for passing high-resolution video and also require balanced or unbalanced stereo audio. At 300 MHz this robust professional matrix switcher can distribute the highest resolution analog signals on the market while maintaining our ultra-flat ±3 dB frequency response. This means true, pure clean video at every destination, every time.

COMMON APPLICATION
Any place computer or other RGBHV sources are distributed throughout a facility from small boardroom and digital signage applications to larger command and control operations.

FEATURES

  • Ultra-flat video bandpass curve measured at a tight ±3 dB
  • 300 MHz bandwidth, fully-loaded worst case scenario
  • Easily supports the highest analog video bandwidth requirements on the market
  • PureSync™ Technology guarantees the quickest possible rise time of the sync signal's leading edge, eliminating the possibility of video loss at the display
  • Digital volume control on each output
  • Digital input gain control on each input to normalize audio input voltages
  • Audio connections support balanced and unbalanced audio
  • Audio breakaway to route audio-follow-video, video or audio alone
  • Superior video crosstalk specifications ensure signal isolation and security
  • Standard RS-232 control port
  • Supports AutoPatch's simple BCS serial control protocol
  • Optional TCP/IP control via external APWeb module
  • Includes intuitive CP-15 front mounted control panel featuring LED backlit LCD and blue light buttons, allowing quick and easy access to execute many commands including status, change, disconnect, local presets, global presets, front panel lock and unlock, input gain, output volume, mute, level commands and more
  • Front panel security lockout
  • Ships with free AutoPatch matrix switcher configuration software
  • Ships with free APControl to provide easy single-user PC control of the matrix switcher
  • Includes AutoPatch's remote link for direct connect with AutoPatch remote panels and SBC control pads
  • Rack mounting ears included
  • Backed by our AMX 3 year warranty
  • Local presets allow quick recall of a pre-programmed set of switches with a single command; multiple presets can exist within a system at the same time
  • Global presets allow quick recall of a comprehensive snapshot of all switches and digital volume controls

I/O RANGE

  • INPUTS: 16
  • OUTPUTS: 24

NOTE: This model contains 2 enclosures and occupies 6 RU. Specifications listed below are for individual enclosures.

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption (Max): 260 Watts
  • Power Consumption (Typ): 150 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 512, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Storage Temperature: -22° to 158° F (-30° to 70° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 5 3/16" x 19" x 12"
  • 13.2 cm x 48.3 cm x 30.5 cm
  • RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 5 3/16" x 17 3/8" x 12"
  • 13.2 cm x 44.2 cm x 30.5 cm
  • RU: 3

WEIGHT

  • Appx. 12 lbs (5.44 kg) per loaded enclosure

MTBF

  • 92,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

RGBHV (BNC)

  • Input Level (Max): ±1.5 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±1.5 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
    • 100 MHz or better (±1.5 dB)
  • Crosstalk
    • <-60 dB (f = 5 MHz)
    • <-35 dB (f = 150 MHz)
  • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: BNC

SYNC

  • Input Level Signal Range: 0 to +5.5 Volts
  • Input Impedance: 22 kOhms
  • Output Level Signal Range: 0 to +5.5 Volts
  • Output Impedance: 75 Ohms
  • In/Out Polarity: Active High or Low (output following input polarity)
  • Output Signal Level: Unity Gain
  • Connectors: BNC

STANDARD AUDIO

  • Input Level (Max): +22 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +22 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <±0.2 dB (20 Hz to 20 kHz)
  • THD + Noise
    • <0.03% (20 Hz to 20 kHz, Vin = -10 to +10 dBu)
    • <0.01% (20 Hz to 20 kHz, Vin = 0 to +22 dBu)
  • Signal to Noise Ratio: >120 dB (20 Hz to 20 kHz, Vin = +20 dBu)
  • Crosstalk: <-110 dB (1 kHz, Vin = +20 dBu)
  • Input Gain Adj. Range
    • ±10 dB, via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Output Volume Adj. Range
    • +10 dB to -70 dB (mute), via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Connectors: 5T

I/O RANGE

  • INPUTS: 20
  • OUTPUTS: 4

NOTE: This model contains 2 enclosures and occupies 6 RU. Specifications listed below are for individual enclosures.

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption (Max): 260 Watts
  • Power Consumption (Typ): 150 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 512, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Storage Temperature: -22° to 158° F (-30° to 70° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 5 3/16" x 19" x 12"
  • 13.2 cm x 48.3 cm x 30.5 cm
  • RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 5 3/16" x 17 3/8" x 12"
  • 13.2 cm x 44.2 cm x 30.5 cm
  • RU: 3

WEIGHT

  • Appx. 12 lbs (5.44 kg) per loaded enclosure

MTBF

  • 92,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

RGBHV (BNC)

  • Input Level (Max): ±1.5 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±1.5 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
    • 100 MHz or better (±1.5 dB)
  • Crosstalk
    • <-60 dB (f = 5 MHz)
    • <-35 dB (f = 150 MHz)
  • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: BNC

SYNC

  • Input Level Signal Range: 0 to +5.5 Volts
  • Input Impedance: 22 kOhms
  • Output Level Signal Range: 0 to +5.5 Volts
  • Output Impedance: 75 Ohms
  • In/Out Polarity: Active High or Low (output following input polarity)
  • Output Signal Level: Unity Gain
  • Connectors: BNC

STANDARD AUDIO

  • Input Level (Max): +22 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +22 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <±0.2 dB (20 Hz to 20 kHz)
  • THD + Noise
    • <0.03% (20 Hz to 20 kHz, Vin = -10 to +10 dBu)
    • <0.01% (20 Hz to 20 kHz, Vin = 0 to +22 dBu)
  • Signal to Noise Ratio: >120 dB (20 Hz to 20 kHz, Vin = +20 dBu)
  • Crosstalk: <-110 dB (1 kHz, Vin = +20 dBu)
  • Input Gain Adj. Range
    • ±10 dB, via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Output Volume Adj. Range
    • +10 dB to -70 dB (mute), via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Connectors: 5T

I/O RANGE

  • INPUTS: 20
  • OUTPUTS: 20

NOTE: This model contains 2 enclosures and occupies 6 RU. Specifications listed below are for individual enclosures.

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption (Max): 260 Watts
  • Power Consumption (Typ): 150 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 512, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Storage Temperature: -22° to 158° F (-30° to 70° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 5 3/16" x 19" x 12"
  • 13.2 cm x 48.3 cm x 30.5 cm
  • RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 5 3/16" x 17 3/8" x 12"
  • 13.2 cm x 44.2 cm x 30.5 cm
  • RU: 3

WEIGHT

  • Appx. 12 lbs (5.44 kg) per loaded enclosure

MTBF

  • 92,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

RGBHV (BNC)

  • Input Level (Max): ±1.2 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±1.2 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
    • 100 MHz or better (±2 dB)
    • 50 MHz or better (±1.5 dB)
  • Crosstalk
    • <-60 dB (f = 5 MHz)
    • <-35 dB (f = 150 MHz)
  • Signal to Noise Ratio: > 65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: BNC

SYNC

  • Input Level Signal Range: 0 to +5.5 Volts
  • Input Impedance: 22 kOhms
  • Output Level Signal Range: 0 to +5.5 Volts
  • Output Impedance: 75 Ohms
  • In/Out Polarity: Active High or Low (output following input polarity)
  • Output Signal Level: Unity Gain
  • Connectors: BNC

STANDARD AUDIO

  • Input Level (Max): +22 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +22 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <±0.2 dB (20 Hz to 20 kHz)
  • THD + Noise
    • <0.03% (20 Hz to 20 kHz, Vin = -10 to +10 dBu)
    • <0.01% (20 Hz to 20 kHz, Vin = 0 to +22 dBu)
  • Signal to Noise Ratio: >120 dB (20 Hz to 20 kHz, Vin = +20 dBu)
  • Crosstalk: <-110 dB (1 kHz, Vin = +20 dBu)
  • Input Gain Adj. Range
    • ±10 dB, via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Output Volume Adj. Range
    • +10 dB to -70 dB (mute), via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Connectors: 5T

I/O RANGE

  • INPUTS: 24
  • OUTPUTS: 4

NOTE: This model contains 2 enclosures and occupies 6 RU. Specifications listed below are for individual enclosures.

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption (Max): 260 Watts
  • Power Consumption (Typ): 150 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 512, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Storage Temperature: -22° to 158° F (-30° to 70° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 5 3/16" x 19" x 12"
  • 13.2 cm x 48.3 cm x 30.5 cm
  • RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 5 3/16" x 17 3/8" x 12"
  • 13.2 cm x 44.2 cm x 30.5 cm
  • RU: 3

WEIGHT

  • Appx. 12 lbs (5.44 kg) per loaded enclosure

MTBF

  • 92,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

RGBHV (BNC)

  • Input Level (Max): ±1.5 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±1.5 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
    • 100 MHz or better (±1.5 dB)
  • Crosstalk
    • <-60 dB (f = 5 MHz)
    • <-35 dB (f = 150 MHz)
  • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: BNC

SYNC

  • Input Level Signal Range: 0 to +5.5 Volts
  • Input Impedance: 22 kOhms
  • Output Level Signal Range: 0 to +5.5 Volts
  • Output Impedance: 75 Ohms
  • In/Out Polarity: Active High or Low (output following input polarity)
  • Output Signal Level: Unity Gain
  • Connectors: BNC

STANDARD AUDIO

  • Input Level (Max): +22 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +22 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <±0.2 dB (20 Hz to 20 kHz)
  • THD + Noise
    • <0.03% (20 Hz to 20 kHz, Vin = -10 to +10 dBu)
    • <0.01% (20 Hz to 20 kHz, Vin = 0 to +22 dBu)
  • Signal to Noise Ratio: >120 dB (20 Hz to 20 kHz, Vin = +20 dBu)
  • Crosstalk: <-110 dB (1 kHz, Vin = +20 dBu)
  • Input Gain Adj. Range
    • ±10 dB, via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Output Volume Adj. Range
    • +10 dB to -70 dB (mute), via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Connectors: 5T

I/O RANGE

  • INPUTS: 24
  • OUTPUTS: 16

NOTE: This model contains 2 enclosures and occupies 6 RU. Specifications listed below are for individual enclosures.

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption (Max): 260 Watts
  • Power Consumption (Typ): 150 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 512, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Storage Temperature: -22° to 158° F (-30° to 70° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 5 3/16" x 19" x 12"
  • 13.2 cm x 48.3 cm x 30.5 cm
  • RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 5 3/16" x 17 3/8" x 12"
  • 13.2 cm x 44.2 cm x 30.5 cm
  • RU: 3

WEIGHT

  • Appx. 12 lbs (5.44 kg) per loaded enclosure

MTBF

  • 92,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

RGBHV (BNC)

  • Input Level (Max): ±1.5 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±1.5 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
    • 100 MHz or better (±1.5 dB)
  • Crosstalk
    • <-60 dB (f = 5 MHz)
    • <-35 dB (f = 150 MHz)
  • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: BNC

SYNC

  • Input Level Signal Range: 0 to +5.5 Volts
  • Input Impedance: 22 kOhms
  • Output Level Signal Range: 0 to +5.5 Volts
  • Output Impedance: 75 Ohms
  • In/Out Polarity: Active High or Low (output following input polarity)
  • Output Signal Level: Unity Gain
  • Connectors: BNC

STANDARD AUDIO

  • Input Level (Max): +22 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +22 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <±0.2 dB (20 Hz to 20 kHz)
  • THD + Noise
    • <0.03% (20 Hz to 20 kHz, Vin = -10 to +10 dBu)
    • <0.01% (20 Hz to 20 kHz, Vin = 0 to +22 dBu)
  • Signal to Noise Ratio: >120 dB (20 Hz to 20 kHz, Vin = +20 dBu)
  • Crosstalk: <-110 dB (1 kHz, Vin = +20 dBu)
  • Input Gain Adj. Range
    • ±10 dB, via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Output Volume Adj. Range
    • +10 dB to -70 dB (mute), via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Connectors: 5T

I/O RANGE

  • INPUTS: 36
  • OUTPUTS: 4

NOTE: This model contains 2 enclosures and occupies 6 RU. Specifications listed below are for individual enclosures.

GENERAL

  • AC Power: 100-240 VAC single phase, 50-60 Hz
  • Power Consumption (Max): 260 Watts
  • Power Consumption (Typ): 150 Watts, fully loaded enclosure
  • BTU/HR (Max): 887
  • BTU/HR (Typ): 512, fully loaded enclosure
  • Operational Temperature: 32° to 110° F (0° to 43° C)
  • Storage Temperature: -22° to 158° F (-30° to 70° C)
  • Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

  • 5 3/16" x 19" x 12"
  • 13.2 cm x 48.3 cm x 30.5 cm
  • RU: 3

DIMENSIONS (HWD) WITHOUT RACK EARS

  • 5 3/16" x 17 3/8" x 12"
  • 13.2 cm x 44.2 cm x 30.5 cm
  • RU: 3

WEIGHT

  • Appx. 12 lbs (5.44 kg) per loaded enclosure

MTBF

  • 92,000 hours

CERTIFICATIONS

  • CE, UL, cUL, RoHS / WEEE compliant

RGBHV (BNC)

  • Input Level (Max): ±1.5 Volts
  • Input Impedance: 75 Ohms
  • Output Level (Max): ±1.5 Volts
  • Output Impedance: 75 Ohms
  • Frequency Response
    • 300 MHz or better (±3 dB)
    • 100 MHz or better (±1.5 dB)
  • Crosstalk
    • <-60 dB (f = 5 MHz)
    • <-35 dB (f = 150 MHz)
  • Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)
  • Connectors: BNC

SYNC

  • Input Level Signal Range: 0 to +5.5 Volts
  • Input Impedance: 22 kOhms
  • Output Level Signal Range: 0 to +5.5 Volts
  • Output Impedance: 75 Ohms
  • In/Out Polarity: Active High or Low (output following input polarity)
  • Output Signal Level: Unity Gain
  • Connectors: BNC

STANDARD AUDIO

  • Input Level (Max): +22 dBu, balanced
  • Input Impedance: 18 kOhms
  • Output Level (Max): +22 dBu, balanced
  • Output Impedance: 50 Ohms
  • Frequency Response: <±0.2 dB (20 Hz to 20 kHz)
  • THD + Noise
    • <0.03% (20 Hz to 20 kHz, Vin = -10 to +10 dBu)
    • <0.01% (20 Hz to 20 kHz, Vin = 0 to +22 dBu)
  • Signal to Noise Ratio: >120 dB (20 Hz to 20 kHz, Vin = +20 dBu)
  • Crosstalk: <-110 dB (1 kHz, Vin = +20 dBu)
  • Input Gain Adj. Range
    • ±10 dB, via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Output Volume Adj. Range
    • +10 dB to -70 dB (mute), via serial/control panel

      • Total of input gain plus output gain cannot exceed +10 dB

  • Connectors: 5T

AMX University Training is available for this product. Applicable courses include:

  • Signal Management Essentials Online Training
  • Getting Started with AutoPatch Online Training
  • AutoPatch Optima Online Training
  • Signal Management Design

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

Contact AMX
Customer Service
Tech Support
Careers
Make this site my AMX.com home page.
 Products
Product News
Product Catalog
Sale Products List
Refurbished Products

Spotlight On:
AMXhome
Enova Solutions
Epica DGX
Inspired Signage
RMS Enterprise		 Dealer Resources
Account Center
AMX Rewards
Professional Services
Training
Valued Independent
Programmers

Newsroom
Events
Literature
Logos & Photos
Newsletter
Public Inquiries
Press Releases
Videos
 Tech Center
Top Downloads (Top 10)
Modules
AMX Devices
3rd Party Devices
Product Resources
A&E Specifications
Application Files
Data Sheets
Drawings
Firmware Files
Manuals
Product Application Guides
White Papers
User Interface Files 		Markets
Broadcasting
Business
Education
AMX for K-12
AMX for Higher Ed
Education Alliance Program
Entertainment
Government
AMX Government Solutions
Healthcare
Hotels
MDU
NOC
Residential
Builders Program
Simplify My Home
Retail
Worship

Submit an Installation		 AMX Offices (*Showrooms)

*AMX Corporate Headquarters
(Dallas, Texas)
© 2013 AMX All Rights Reserved.
 Feedback | Gear Store | Site Map | Terms & Conditions | Warranty