PS2.8 13.5 VDC, 2.8 A Power Supply with 2.1 mm Barrel Connector (and included 5.5 mm Phoenix Connector)

OVERVIEW
Perfect for 13.5 DC power with Axcess systems, the PS2.8 Power Supply is a Class 1 power supply. The PS2.8 is UL listed in addition to CSA and CE approved. The PS2.8 comes with both an attached 2-pin captive wire connector (5 mm) and a spare 3.5 mm captive wire connector. For your convenience, the PS2.8 also comes with a with 5 mm Phoenix Connector.

FEATURES

  • Class 1 power supply
  • UL listed
  • CSA approved
  • CE approved

SPECIFICATIONS

DIMENSIONS (HWD)
4 5/8" x 2 5/16" x 1 1/2" (11.7 cm x 5.8 cm x 3.5 cm)

WEIGHT
1 lb (450 g)

POWER

  • Input Voltage: 100-240 +10% VAC
  • Input Frequency: 47-63 Hz
  • Input Current:
    - 0.9A MAX at 115 VAC + full load
    - 0.6A MAX at 230 VAC + full load
  • Output Voltage: 13.5 VDC
  • Output Current: 2.8A (continuous power output is 35 W max)

ENCLOSURE
Molded black matte plastic, with captive 6-foot (1.83 m) output cord and IEC male input power jack

RIPPLE AND NOISE
135 mV peak-to-peak @ full load

PROTECTION
Over-voltage, over-current, short-circuit, transient and thermal. Switching regulated, overload protected

POWER INDICATOR
Green LED indicates the presence of DC on the output

CONNECTORS

  • 2.1 mm barrel plug
  • Also includes 2-pin captive wire connector (5.0 mm)

INPUT POWER CORD
6-foot (1.83 m) IEC power cord terminated with a grounded Edison plug for AC input

CERTIFICATION
UL: US listed - Class 1 Power Supply, CSA approved, CE approved

ENVIRONMENTAL
32ºF to 122ºF (0ºC to 50ºC)

INCLUDED ACCESSORIES
Single Universal input power cord (64-0009)

Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Quest for Power (Online)
  • Control Designer
  • Control Installer

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
/assets/coolIcons/amxUniversity.png

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • Quest for Power (Online)
  • Control Designer
  • Control Installer

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

 /assets/coolIcons/gsa.png

GSA

This product has been approved by the U.S. Government’s General Services Administration to be specified for use in government installations.

 PS2.8 Products default.asp Control System Accessories categoryControlSystemAccessories.asp PS2.8 PS2.8.asp FG423-11 12 VDC, 2.8 A Power Supply R/A DC Plug FG423-05 12 VDC, 2.8 A Power Supply US
Pictorial (95) Drawings PS2.8 13.5 VDC, 2.8 A Power Supply with 5 mm Phoenix Connector /techdocs/95042305.pdf _blank PDF /techdocs/endwgs/95042305.dxf _blank DXF PS2.8 Pictorial (95) Drawings PS2.8 13.5 VDC, 2.8 A Power Supply, Shown Using a Barrel Plug /techdocs/95042311.pdf _blank PDF /techdocs/endwgs/95042311.dxf _blank DXF PS2.8 Control System Acc. PS2.8 /assets/logosAndPhotos/PS2.8.png /assets/logosAndPhotos/thumbnails/PS2.8.jpg _blank PNG | 1.29 MB PS2.8 1 2008-07-11 Control System Acc. Installation Guide - Power Supplies /techdocs/PowerSupplies.InstallationGuide.pdf _blank 2007-06-19 REV G PDF | 252 KB PSN6.5 PSN4.4 PS4.4 PSN2.8 PS2.8 PS 3.0