RDD-DM6

6-Channel Integrated Dimmer Module

Description
120VAC
Part #FG606-22
This Product Has Been Replaced By: RE-DM6
INTEGRATED DIMMER MODULE FEATURES
  • Provides intelligent system processing, networking and non-volatile preset memory
  • Drives all channels using the same power phase
  • Stores 128 onboard presets, each can use unique fade time
  • Ramps using programmable fade time, from zero to 255 seconds
  • Provides up to 16 different dimming curves for precision control
  • Creates system-wide and zoned presets

MOUNTING: Installs into two Radia Lighting Enclosure spaces

COOLING: Requires no fans, convection-cooled

LISTING: UL/CUL listed for continuous-duty operation

CONTROL
  • ProLink- A 4-wire data bus that interconnects Dimmer Cards, Integrated Dimmer Modules and wall panels. The high-speed network can operate up to 60 lighting channels (10 6-channel packs) and Wall Panels.
  • AxLink: A four-wire data bus that connects Radia Lighting Systems to AMX Axcess, NetLinx® and Landmark Control Systems, and allows Radia lighting control to be carried over copper wiring, fiber optic cable, a computer network and the Internet.
  • Closures- Each Dimmer Card can accept up to eight contact closure inputs for basic preset recall and inexpensive lighting control.
SIX 10A ONBOARD DIMMERS
  • Drive all six from one 20A feed
  • Split into two 20A zones, three dimmers per zone
  • No digital control channels for Radia Lighting Modules

VOLTAGE: Available for 120/240 VAC applications

ORDER FREE FIRMWARE UPGRADE
Radia Master Firmware v3.22
Release Date September 28, 2005

This firmware is programmed into an E-PROM chip and not available as a download. Please order the free replacement chip using part number: PC606-A.

NEW FEATURES
  • Improve ProLink interface error detection and message handling.
  • Add new phase/zero-crossing detection and correction features at startup and reset.
  • This firmware reduces AxLink controller lock-ups and Radia devices from dropping off line.

KNOWN ISSUES: This firmware disables most of the return responses from ProLink programming strings. AxLink responses and feedback will work as normal.



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.


Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty