OVERVIEW
The RDM-DC Dimmer Module is a 1920 W module used for the
dimming of fluorescent ballast loads. It uses a 0 to 10 VDC current
sinking for use with four-wire ballasts. It is designed for use with
the RDA series of enclosures, in an AMX Lighting modular digital
dimming system. The module’s 120 and 277 VAC ratings are CE,
UL, and C-UL approved.
FEATURES
- Dims one circuit DC-controlled electronic fluorescent ballasts
- Ramps 0-12 VDC signal for level control
- One 20 A Positive air gap relays for power
- Current sinking
- Installs in one enclosure space
- Non-phase dependant
SPECIFICATIONS
DIMENSIONS (HWD)
10” x 2 3/4” (25.4 cm x 6.99 cm)
WEIGHT
2.3 lbs (1.04 kg)
UL AND C-UL RATINGS
- 120 VAC, 50/60 Hz, 1920 W
- 277 VAC, 50/60 Hz, 1920 W
- Control Out: 50 mA, 12 VDC sinking
SUGGESTED DIMMED LOADS
Four-wire dimmable ballasts, like Advance Transformer Mark VII™ or the Energy
Savings SuperDim™ series
WIRING
- Use wires rated at 75°C (167°F)
- Max. wire size: 10 AWG (4 mm²)
- Wire stripping length: 0.28” (7 mm)
TORQUE TERMINALS
To 20 in-lbs (2.3 N/M)
CONTROL CURRENT
125 mA @ 12 VDC
