OVERVIEW
The RADIA Eclipse 6-Channel Integrated Dimmer Module (120
VAC: FG706-03; 240 VAC: FG706-04) controls up to six circuits with
six 1200-watt onboard dimmers. The RE-DM6 is designed for use
with the RDA series of enclosures, in an AMX Lighting modular
digital dimming system. The RE-DM6 is controlled by AxLink or by
dry (contact) closures.
COMMON APPLICATION
A good choice for larger businesses and residences needing
support of up to 6 Radia traditional dimmers.
FEATURES
- Custom preset configuration files - which can be saved and reused in any installation - a huge time saver for programmers
- Support for up to 768 dimmers/zones - a more than 8 fold increase over the previous generation
- Greater processing power for quicker preset recall - an even better user experience
- RoHS compliance - an environmentally-friendly product
- Each traditional dimmer - supports up to 1200 watts
- Supports up to 6 Radia traditional dimmers
GSA
This product has been approved by the U.S. Government’s General Services Administration to be specified for use in government installations.
SPECIFICATIONS
DIMENSIONS (HWD)
5 3/4” x 10” (14.6 cm x 25.4 cm)
WEIGHT
4.5 lbs (2.04 kg)
LINE INPUT
- 120, 240 VAC, single phase, 2W+G, 50/60 Hz, 2400 W, one feed
- 120, 120/240, 240 VAC, single phase, 3W+G, 50/60 Hz, 4800 W, dual feed
- Line input #1 goes to dimmer 1 and 3; line input #2 goes to dimmer 2 and 4
OUTPUT
- 1200 W max. per channel @120, 240 VAC
- 2400 W max. total, all four channels on with single 2400 W feed
- 4800 W max. total, all four channels on with dual 2400 W feeds
- All electrical ratings are for continuous duty
WIRE RATING
Use only copper wires rated at 75°C (167°F) min
TORQUE TERMINALS
To 20 in-lbs (2.3 N/M)
MAXIMUM WIRE SIZE
10 AWG (4 mm²)
WIRE STRIPPING LENGTH
0.5” (13 mm)
AXLINK PORT
4-pin 3.5 mm black captive wire connector. AXLink communication signaling
with 12 VDC power in
AUX POWER
2-pin 3.5 mm green captive wire connector. This is a 12 VDC power input that
supplies additional power to the Radia PCB and connected Radia modules
DRY CONTACTS
- Emergency fire alarm relay connection - Closed relay activates preset 126. Other control is locked out until relay opens. Supports daisy chaining of up to 20 dimmers for this connection, with a maximum current requirement of 200 mA when daisy-chained
- Failsafe connection - Works with a toggle switch - opening the switch triggers preset 128, closing the switch triggers preset 127. Supports daisy chaining of up to 20 dimmers for this connection with a maximum current requirement of 200 mA when daisy-chained
IDLE CURRENT DRAW
75 mA @ 120 VAC, 50 mA @ 240 VAC, 100 mA @ 13.5 VDC
CERTIFICATIONS
FCC, CE, UL North America, IEC 60950 Safety
ENVIRONMENTAL
- Operating Temperature: 0º to 40º C (32º to 104º F)
- Heat Dissipation (Typical): 300 BTU/hr single feed (2400 W); 600 BTU/hr dual feed (4800 W)
INCLUDED ACCESSORIES
- 2 4-pin 3.5mm captive wire connector (41-5047)
- 4 #8-32x1/2” F-point mounting screws
GSA
This product has been approved by the U.S. Government’s General Services Administration to be specified for use in government installations.