OVERVIEW
The Signature Series UDM-0808-SIG Multi-format Distribution
Hub delivers any video source, including Composite, Component,
S-Video, and RGB/VGA to up to 32 display devices. Use the
UDM-0808-SIG with a NetLinx controller to provide source device
control and touch panel control of the content and
display devices.
COMMON APPLICATION
Ideal for residential applications as a companion to the NI-3101
Signature Series NetLinx Controller or the Tango Audio Controller
as all three components share the same elegant finish and mirror
matched showroom styling. An ideal solution for high quality
whole home AV distribution of up to eight sources to up to
eight displays.
FEATURES
- 8 multi-format inputs x 8 outputs
- Supports Composite, S-Video, Component, RGBHV
- Distribute multi-zone HD in conjunction with stereo and/or digital audio
- Cascade output ports allow A/V distribution to other UDM-0808-SIG Hubs, or to UDM-ABB-8-SIG Audio Breakout Boxes
- Cascadable to support higher number of outputs
- Transmit signals up to 1000 feet (300m) over a single twisted pair cable
- Appears in NetLinx Studio as a NetLinx device
SPECIFICATIONS
DIMENSIONS (HWD)
- 3 1/2” x 19” x 12 1/2” (88.9 cm x 44 cm x 32 cm)
- RU: 2
WEIGHT
13.6 lb (16.17 kg)
POWER
- 3 PIN IEC, 100 to 240 VAC 50/60 Hz
- Dissipation: 130 W
FRONT PANEL COMPONENTS
- LEDs
- Power Status bar - Blue light bar on front panel indicates unit is powered
- Status LEDs - Eight blue LEDs light to indicate which of the eight outputs are currently routing video to a connected UDM-RX02N Receiver
REAR PANEL COMPONENTS
- UDM Output Ports: provide connectivity to up to 8 UDM-RX02N receivers via Cat5/5e/6/7
- Input Connectors (A-H): Eight sets of Input connections for up to 8 A/V inputs with the following connectors:
- Video
- Analog audio Left / Right
- S/PDIF digital audio
- Video Inputs: HD-15 female connector supports the following formats:
- VGA
- Component - requires an UDM-HD15RCA3 Breakout Cable (FG-HD15RCA3, not included)
- S-Video- requires an UDM-SVID01 HD15 to S-Video Cable (FG-UDM-SVID01, not included)
- Composite - requires an UDM-HD15RCA3 Breakout Cable(FG-HD15RCA3, not included)
- 8 x RGBHV (or)
- 8 x S-Video (or)
- 8 x Component (or)
- 8 x Composite Inputs
- Audio Inputs:
- Analog Audio In - RCA female analog audio connectors (white = Left, red = Right)
- S/PDIF Audio In - RCA female digital audio connector (black)
- Network Port: RJ-45 Ethernet port provides 10baseT network connectivity
- Serial Port: RJ-12 port allows an administrator to receive debugging and diagnostic information via RS-232
NOTE: Serial Interface: 115200, 8, N, 1 - Cascade In/Out: 1-4/5-8:
- Cascade Out and In ports send and receive cascaded A/V signals to other UDM-0808-SIG Hubs
- The Cascade Out ports can also provide audio-only to a UDM-ABB-8-SIG Audio Breakout Box
Note: Depending on the application, up to four Hubs can be cascaded together.
- IEC Power Connector: Universal switch-mode power supply
- As a Class 1 appliance the Hub should be connected to a mains supply with a protective earthing connection
- The On/Off switch is located beside the power connector
Note: The rating label found on the bottom left of the rear panel (beneath the IEC connector) contains important information applicable to the Hub’s installation environment.
CERTIFICATIONS
CE, FCC part 15 Class A
ENVIRONMENTAL
- 35°F to 95°F (5°C to 35°C)
- Max. relative humidity - 85% (non-condensing)
INCLUDED ACCESSORIES
- IEC power cord
- 19" mounting brackets
- UDM-RC05 IR Remote Control (FG1402-70)
- IR03 External Infrared Receiver Module (FG-IR03)
Note: No A/V interface cables supplied
READ ABOUT IT: UDM Universal Distribution Matrix FAQ White Paper
We invite you to learn more about the capabilites of universal distribution in the white paper: “UDM Universal Distribution Matrix FAQ”.
TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
- Signal Management Essentials (Online)
- Getting Started with Endeleo Products (Online)
- Endeleo System Configuration (Online)
- Signal Management Design
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
GSA
This product has been approved by the U.S. Government’s General Services Administration to be specified for use in government installations.