All-In-One Presentation Switchers Master Firmware v4.8.331

Last Updated: Mar 14, 2018

NOTE 1) : Once upgrading to this version you will not be able to downgrade the DVX to below v4.8.324. This prevents scenarios where the DVX could hang at boot when using an earlier version of firmware which does not allow for the wider variety of CompactFlash card manufacturers now supported.

NOTE 2) : To ensure a successful firmware upgrade with this release please refer to the file "SW1905-15-DVX-HD-SP-ProgrammingInstructions.txt".

Prerequisites:

  • NI Device 5001: 1.31.6
  • Switcher 5002: 1.6.31

 

RMS Transporter Update Manager Support:
This version includes support for the RMS Transporter Update Manager. The NI must be running device firmware (device 5001) version v1.31.6 or higher. However, there is no RMS Transporter Update Manager Support to upgrade the device firmware. This will have to be done using Netlinx Studio.

Fixes in this release:

  • Fixed LDAP processing to increase the maximum number of returned results allowed
  • Fixed LDAP to limit the search scope to either the admin or user group
  • Fixed LDAP return result checking to be case insensitive (which matches LDAP and NX master behavior)
  • Fixed DATA.SOURCEIP so that it supports IPv6 addresses (for connection with NX master)
  • Removed debugging account to prevent security vulnerability
  • Fixed SSL certificate request form which wasn't storing user inputs
  • Fixed SSL certificate values to be persistent through system reboot

Known Issues:

  • There is no ability to configure connected DxLink receivers from the Web GUI.
  • Due to the way many browsers manage file upload requests while in an authenticated session, it is not possible to load a DVX setup (.xdv) file with any web browser that AMX has tested, except Microsoft Internet Explorer when HTTP Security is enabled on the DVX Master.
  • IE security does not allow G4WebControl to install by default and IE8 64-bit is not supported.

 

Hot Fix for the All-In-One Presentation Switchers Master Firmware (v.4.8.336 Available from AMX Technical Support)

Changes in this release:

  • Fixed LDAP processing to increase the maximum number of returned results allowed
  • Fixed LDAP to limit the search scope to either the admin or user group
  • Fixed LDAP return result checking to be case insensitive (which matches LDAP and NX master behavior)
  • Fixed DATA.SOURCEIP so that it supports IPv6 addresses (for connection with NX master)
  • Removed debugging account to prevent security vulnerability
  • Fixed SSL certificate request form which wasn't storing user inputs
  • Fixed SSL certificate values to be persistent through system reboot
  • Upgraded OpenSSL to prevent security vulnerabilities
  • Added new command 'set ssh version' which allows the user to disable support of SSH v1 and only allow SSH v2 connections
  • Fixed issue when loading driver dependencies
  • Altered LDAP to search for a user's groups using the bindDn information
  • Removed LDAP processing when making an ICSP connection to match the NX's behavior and allow local users to continue to be valid.
  • Fixed M2M CommandSize and StringSize message processing to allow for Port 0 (indicating all ports) to be specified.
  • Increased LDAP URI, Base DN, Bind DN, User Query Attr parameters' max length from 100 to 255 and the search password max length from 100 to 128 to match the NX's behavior.

 

 

Previous Versions


Previous Versions