SVSI N23xx Series Encoder and Decoder Firmware Updater v1.1.14

Last Updated: Jun 21, 2018

Product Name: N-Series N2300 Video Encoder/Decoder
FG #: FGN2312-SA
FGN2322-SA

Version: 01.01.14
Release Date: 3/30/2018

----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------

- None

----------------------------------------------------------
2. Revision History
----------------------------------------------------------
Version 01.01.14
• Improve KVM connection recovery on reboot.
• Change audio stream ttl to default to 64
• Implement KVM retry
• Make analog audio startup delay optional
• Add optional encoder reboot on audio input failure

Version 01.01.05
• Fix issue with uploading odd host/local play images
• Fix issue with debug log startup
• Fix issue with KVM reconnecting on encoder or decoder restart
• Improved button feedback on webpages
• Treat stream 0 as a stream instead of as a local play command
• Add HDCP connection status to the decoder
• Resolved audio stream compatibilty issues with other N-Series units
• Fixed audio multicast address calculation
• Add option to blank video during switch
• Don't issue NAct plug events on bootup
• Improved audio networking to avoid audio pops when video rate goes up
• Delay audio startup to avoid audio artifact after stream switch
• Add option to disable video genlock which causes some monitors to stutter the audio
• Improve decoder robustness

Version 00.04.22
• Fix audio multicast address for non-interleaved mode

Version 00.04.21
• Fix 32K and 44.1K audio issue that occurred with selected monitors
• Default output to RGB to avoid the green screen
• Default KVM to on to match spec

Version 00.04.20
• Fix audio pop on decoder analog audio output
• Add 1920x1200 to EDID (requires reloading default EDID).
• Add latest netlinx support and add netlinx version to the webpage

Version 00.04.15
• Fix audio stutter issue
• Add control for video genlock
• Fix issue with audio channel count change crashing encoder.
• Fix issue with log overflowing on debug start
• Add support for DNS

Version 00.04.11
• Provide sync override feature for monitors that are sensitive to clock changes.
• Fixed decoder issue caused by selecting stream 0. Now is the same as localPlay.
• Fix IR upload for N2300 devices

Version 00.04.08
• Fix loss of I-Frame requests on encoder stream restart

Version 00.04.04
• Add commands for output volume up/down
• Support secure ports only mode
• Clean up xml status file
• Improve encoder HDCP robustness
• Add line input volume control
• Fix decoder reboot on stream switch
• Suport RGB 4K resolution mode
• Block unknown multicast streams from the swtich
• Support Harman serial number format
• Fix network lockup when switching into DHCP mode
• Improved Netlinx support
• Improved decoder stability

----------------------------------------------------------
3. Known Issues
----------------------------------------------------------

• On soft reboot, some devices lose KVM connectivity and require a hard decoder reboot
• If DHCP is first enabled on a network without a DHCP server, the unit reboots and the
setting is lost. If the unit is running DHCP but is rebooted on a network without a
DHCP server, it falls back to autoip correctly.

Previous Versions


Related Products

  • Amx nmx dec n2322 front high thumb

    NMX-DEC-N2322

    JPEG 2000 N2300 Series 4K UHD Video over IP Stand Alone Decoder with KVM, PoE
  • Amx nmx enc n2312 front high thumb

    NMX-ENC-N2312

    JPEG 2000 N2300 Series 4K UHD Video over IP Stand Alone Encoder with KVM, PoE

Previous Versions