DGX800-ENC

Enova® DGX 800 Enclosure

Hình ảnh lớn hơn

Bộ vỏ Enova DGX 800 (DGX800-ENC) mới là một Bộ chuyển đổi phương tiện kỹ thuật số sẵn sàng hỗ trợ nội dung 4K và Ultra High Definition (UHD). Giải pháp mạnh mẽ này bao gồm Bộ điều khiển tích hợp NetLinx® NX, nguồn điện dự phòng và có thể được trang bị các bo mạch đầu vào và đầu ra video Enova DGX cùng với các bo mạch chuyển đổi âm thanh tùy chọn. Mỗi bo mạch video có bốn kết nối và mỗi bộ vỏ chứa hai bo mạch đầu vào video và hai bo mạch đầu ra video với ma trận tối đa 8x8.

Enova DGX 800 bổ sung nhiều khả năng mới như thiết lập tự động các điểm cuối DXLink, địa chỉ IP duy nhất cho nhiều điểm cuối và giao diện web mới giúp đơn giản hóa đáng kể việc cài đặt và cấu hình. Các bo mạch chuyển đổi âm thanh nâng cao mới cung cấp khả năng tách riêng âm thanh và EQ tham số trên mỗi đầu ra DGX.

Enova DGX 800 vượt xa so với bộ chuyển đổi phương tiện có khả năng điều khiển tích hợp - nó hoạt động như trung tâm của một giải pháp tích hợp hoàn chỉnh quản lý và phân phối âm thanh và video analog và kỹ thuật số bao gồm HDMI/HDCP, điều khiển và Ethernet. Dễ dàng tích hợp HDCP vào thiết kế hệ thống và tận hưởng hoạt động cắm và chơi không có rắc rối. Không có công cụ, không có trì hoãn và không có ràng buộc khóa – nó chỉ hoạt động với Công nghệ InstaGate Pro® độc quyền của AMX. Được xây dựng cho nhu cầu hiện tại và tương lai, một bộ bo mạch Enova DGX toàn diện có thể được sử dụng kết hợp với DXLink và Bộ truyền/nhận DGX để cung cấp một hệ thống phân phối end-to-end qua cáp xoắn hoặc sợi quang. Bộ điều khiển NetLinx NX tích hợp và công tắc Ethernet nhúng cho phép quản lý toàn bộ giải pháp bao gồm thiết bị nguồn và thiết bị hiển thị nằm khắp môi trường – tất cả từ một điểm điều khiển duy nhất.

Ngoài việc loại bỏ trì hoãn HDCP, InstaGate Pro cho phép các nguồn bị giới hạn khóa theo truyền thống được chuyển đổi tự do cho tất cả các màn hình tuân thủ HDCP được kết nối – loại bỏ các giới hạn khóa HDCP gây ra rắc rối cho các ứng dụng lớn. Công nghệ SmartScale® tích hợp trên mỗi đầu ra cung cấp video được mở rộng hoàn hảo cho mỗi màn hình được kết nối, loại bỏ các thách thức tích hợp có thể xảy ra khi các nguồn và màn hình có độ phân giải được hỗ trợ khác nhau – giúp dễ dàng chỉ định, dễ dàng cài đặt và dễ dàng sử dụng. Với sự kết hợp mạnh mẽ của chuyển đổi tín hiệu analog sang kỹ thuật số, mở rộng video và chuyển đổi kỹ thuật số tốc độ cao, hệ thống cung cấp video hoàn hảo mỗi lần – bất kể loại tín hiệu.

Là một phần của hệ thống phân phối hoàn chỉnh, dễ dàng gửi âm thanh và video analog hoặc kỹ thuật số bao gồm HDMI với tín hiệu HDCP, cộng với điều khiển 10 km trên sợi chế độ đơn hoặc 300 mét trên sợi chế độ đa; gửi tất cả điều này cộng với nguồn điện lên tới 100 mét trên cáp xoắn chuẩn đến và từ Enova DGX bằng cách sử dụng Bộ truyền/nhận DXLink Twisted Pair và Fiber.

Thêm Chi tiết

  • Enova DGX is ideal for dramatically simplifying AV control and distribution in large spaces such as lecture halls, auditoriums, hotel ballrooms, casinos, museums and stadiums/arenas.
  • The Enova DGX is ideally suited for multi-room or configurable room applications, where multiple collaboration spaces share a single DGX for control.
  • Enova DGX fiber capabilities enable transport of audio, video and control up to 10 Km making it a perfect solution for tall buildings with multiple floors, large campuses with multiple buildings or large facilities such as a factory.
  • Enova DGX fiber solutions provide secure distribution of content for applications which data security is critical such as government, banking/finance or network operation centers.

configuration_tool

Tải xuống

Tài liệu
  Kích thước Đã tải lên
file type icon Data Sheet
cập nhật: Thg 4 2026
300 KB Thg 4 2026
Manuals
  Phiên bản Kích thước Đã tải lên
  10 MB Thg 7 2022
file type icon Support Guide - Enova DGX Board Replacement
phiên bản P, cập nhật: Thg 3 2021
900 KB Thg 3 2021
  50 KB Thg 2 2021
CAD Drawings
  Kích thước Đã tải lên
2 MB Thg 10 2020
500 KB Thg 10 2020
Firmware
  Phiên bản Kích thước Đã tải lên
download icon for Enova DGX 800/1600/3200/6400 Firmware Upgrade Kit Enova DGX 800/1600/3200/6400 Firmware Upgrade Kit
phiên bản 3.6.29, cập nhật: Thg 10 2025
3.6.29   8 MB Thg 10 2025
download icon for NX Series (X200) NX/DVX/DGX Device Firmware NX Series (X200) NX/DVX/DGX Device Firmware
phiên bản 1.1.50, phát hành: Thg 4 2024
1.1.50   50 KB Thg 4 2024
download icon for DGX x00 with 4K60 DXLink Switcher & Controller Update DGX x00 with 4K60 DXLink Switcher & Controller Update
phiên bản 3.8.26, phát hành: Thg 4 2024
3.8.26  
download icon for DGX Control Panel Firmware (100 Series Compatible) DGX Control Panel Firmware (100 Series Compatible)
phiên bản 2.2.0p5, phát hành: Thg 7 2018
2.2.0p5   3 MB Thg 7 2018
download icon for NX Series (X200) NX/MCP/DGX Controller Firmware NX Series (X200) NX/MCP/DGX Controller Firmware
phiên bản 1.8.218, cập nhật: Thg 8 2026
1.8.218   200 MB Thg 8 2026
Install Guides
  Kích thước Đã tải lên
file type icon DGX Control Panel Label Template
cập nhật: Thg 11 2020
30 KB Thg 11 2020
Certifications
  Kích thước Đã tải lên
300 KB Thg 2 2021
200 KB Thg 2 2021
100 KB Thg 2 2021
200 KB Thg 2 2021
Quick Start Guides
  Phiên bản Kích thước Đã tải lên
file type icon Quick Start Guide - Enova DGX 100 Series Digital Media Switchers
phiên bản H, cập nhật: Thg 9 2021
900 KB Thg 9 2021
Programming Guides
  Kích thước Đã tải lên
3 MB Thg 10 2020
Configuration Tools
  Kích thước Đã tải lên
file type icon Enova DGX 100 Series Configuration Tool
cập nhật: Thg 3 2021
Thg 3 2021

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Tính năng

  • HDMI/HDCP Switching – End-to-end distribution of HDMI/HDCP without interruption or key constraints using InstaGate Pro® Technology
  • 4K and Ultra High Definition (UHD) Content Ready – Designed to support future resolutions for years to come
  • HDCP Compliance Over Fiber – Compatible DXLink Fiber boards transmit uncompressed video, including HDCP protected content, up to 10 Km at 10 Gbps (single mode fiber options transmit 10 Km, multimode 300 m)
  • Fiber Your Way – DXLink Fiber boards are available in single mode or multimode; simplex or duplex
  • AV and Control over Twisted Pair, Fiber or Both – Send audio, video, bi-directional control and Ethernet over twisted pair or fiber cable, or integrate both into the same system
  • Embedded NetLinx NX Integrated Control Processor – Allows any connected device to be managed, monitored or controlled
  • Integrated Ethernet Switch – Pass Ethernet through the attached DXLink Twisted Pair or Fiber Transmitters and Receivers
  • Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses SmartScale Technology to automatically output video that is perfectly scaled for each connected display
  • Onboard Web Configuration for all Aspects of the DGX System – Greatly simplifies the setup and configuration of Enova DGX systems including DXLink endpoints drastically reducing installation time
  • Automatic Setup of DXLink Endpoints – Simplified installation by auto-discovering DXLink devices when they are connected to an Enova DGX
  • Single IP Address Required for Multiple Endpoints – Reduces the need for IT administrators to provision numerous IP addresses across the system for transmitters and receivers
  • Unrivaled Network Security – With Dual NIC to isolate AMX or third-party AV equipment from the primary network, IPv6 and wired 802.1X for protected network access, and user-defined LDAP login group support, the Enova DGX provides rock-solid security
  • Independent Routing of Audio and Video Using Audio Switching Boards – Provides increased flexibility to combine and separate audio from video in a variety of applications
  • AxLink Port – Makes it easier to connect AxLink devices like keypads directly to the Enova DGX
  • InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-free matrix switching to all compliant displays. No tools, no delays, and no key constraints – it just works
  • SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
  • DXLink Twisted Pair Input and Output Boards – HDCP Compliant boards send audio, video, control, Ethernet and power over one standard twisted pair cable up to 200 m – 100 m to the matrix switcher and 100 m after the matrix switcher, see the Cabling for Success with DXLink white paper for more details
  • Easily Convert Analog to Digital Signals – Use the Enova DGX Digital Media Switcher in conjunction with DXLink Multi-Format Transmitters (Twisted Pair or Fiber), and easily integrate legacy analog sources and automatically convert their signals to digital
  • Hot Swappable Video Input / Output Boards – Easily add or replace I/O boards at any time after deployment - the system automatically recognizes the new configuration and activates the boards
  • 3D Support – Pass through latest video formats including 3D and Deep Color
  • Surround Sound Support – Pass through high definition surround sound including Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, and 2-channel through 8-channel L-PCM
  • High Speed Digital Switching – 26 Gbps* ensures perfect pixel for pixel reproduction of video
  • Fully Redundant Power Supplies With Independent Power Paths – Ensures maximum reliability for applications that require 24/7 uptime

 

*Enclosures manufactured on or after June 1, 2016, those manufactured before that time have a per channel aggregate data rate of 12.8 Gbps.

Thông số kỹ thuật

Maximum IO Range 8x8. Enclosure holds up to 2 input boards and 2 output boards; each board has 4 connections.
Per Channel Aggregate Data Rate (Max) 26 Gbps
Dimensions With Extractors and Mounting Ears: 6 13/16" x 19" x 16" (17.4 cm x 48.3 cm x 40.6 cm)
Integrated Controller NetLinx On Board Master is an NX Class Controller
Integrated Front Panel Control Integrated front control panel with key selections for each input/output, four control keys for system switches and attributes, and an LCD to display the menu screen.
Connectors See specifications for selected board
Compatible Formats See specifications for selected board
Signal Type Support See specifications for selected board
Maximum Resolution Support See specifications for selected board
Audio Format Support See specifications for selected board
FG Numbers FG1061-08
JITC Status Approved - 04/2023

Tin tức