DR-8SW16A Relay Switch is designed for DIN-rail installation and provides 8 channels of relay switching signal, each channel having independent control of the 3520W device connected. Built-in emergency switch for quick preparation prior to commissioning. LEDs indicate status of each channel switch. Configurable interlock groups for control of four sets of shades.
Hình ảnh lớn hơn
Tải xuống
cập nhật: Thg 4 2026
cập nhật: Thg 4 2026
Tính năng
- Designed for standard 35mm DIN rail installation [Space Occupation: 4P (per P:18mm)].
- 8 channels use Tyco dual contact relay for switching on or off its 16A circuit.
- Each channel has independent switch control of the 3520W device connected.
- Configurable initial value of each channel.
- Sequential start of each channel to avoid power grid turbulence due to simultaneous startup.
- Two interlock logic groups for control of four shade sets.
- Three interlock logic groups for control of two A/C’s speed settings (low, medium and high fan speed).
- Immediate report to control center the status of each channel switch in case a scene command is executed.
- Local or remote programming and commissioning.
- Built-in emergency switch for quick preparation prior to commissioning.
- LEDs indicate status of each channel switch.
- Online upgrading.
- Communication through DR-Link interface.
Thông số kỹ thuật
| Power Supply | DC 24V 90mA |
| Controlled circuit | 8 x relay switches or 4 x shade sets |
| Surge current | AC 250V 170A |
| Current in each channel | 16A |
| Mechanical lifetime | 10,000,000 times |
| Electrical lifetime | 100,000 times |
| Control interface | 2 × DR-Link |
| Maximum power consumption | 8W |
| Static power consumption | 0.5W |
| Dimensions (L x W x H) | 72 mm × 98 mm × 68 mm |
| Weight | 315 g/pcs |
Hỗ trợ Tư vấn viên