NI-4100

NetLinx® Integrated Controller

Description
NI-4100 Controller
Part #FG2105-06
7 | 8 | 8 | 8
Serial • Relay • IR • Digital I/O

TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • AMX Essentials (Online)
  • Getting Started with AMX (Online)
  • Control Designer
  • Quest for Power (Online)
  • Control Installer
  • Control Programmer 1
  • Getting Started with AMX Modules (Online)
  • Control Programmer 2
  • Control Programmer 3
  • Introduction to Duet (Online)
  • Building Java Modules using Café Duet

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

D-Tools Certified Product

This product can be found in the D-Tools manufacturer product database and specified as a third party device when building and proposing a system using D-Tools System Integrator software. D-Tools data includes attributes that make it easier to sell, design, and install systems including: overview, specifications, images, product documentation and more. AMX is a member of the D-Tools Manufacturer Vantage Point (MVP) program designed to provide D-Tools customers the most up-to-date product information.

Revit BIM

This product is part of the Autodesk Revit database and can be specified in designs for Building Information Modeling (BIM). Click here to download the associated Revit .rfa file from the Autodesk SEEK Web site. It is also searchable under 'AMX' in any Autodesk application."

COUNTRY OF ORIGIN: MEXICO

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

JITC TESTED

This product has been thoroughly tested for network security by the Joint Interoperability Test Command (JITC) division of the Defense Information Systems Agency (DISA) under Department of Defense (DoD) Directive 8500.01E, DoD Instruction 8500.2 and DISA Field Security Operation Security Technical Implementation Guides (STIG). It achieved a perfect score in the JITC IP Vulnerability testing with no High, Medium or Low impact findings.

Data SheetsManualsLiterature
A & E SpecificationsWhite PapersDrawingsFirmware FilesHot Fix FilesPhotos

NI-4100 - Front
PNG | 2.97 MB

NI-4100 - Front Left
PNG | 2.44 MB

NI-4100 - Front Right
PNG | 2.08 MB

NI-4100 Rear
PNG | 2.28 MB

Regulatory Compliance

OVERVIEW
The NI-4100 provides versatility with the ability to integrate the largest number of devices in the NI Series of Master Controllers, including projectors, lighting, DVD and Blu-Ray players, thermostats and other electronic equipment. In these technology-driven environments, this solution allows for the future addition of more devices and control capabilities. With a perfect mix of compatible formats, the NI-4100 offers flexibility and customization for businesses experiencing rapid growth and for homes that demand seamless integration of technology and design. The NI-4100 provides higher performance with a faster processor, 64MB of onboard RAM and Duet-compatibility.

COMMON APPLICATION
The NI-4100 is geared to meet the high-end control and automation requirements of the most sophisticated and complex commercial and residential installations.

FEATURES

  • 7 Configurable RS-232 / RS-422 / RS-485 Serial ports
  • 8 Relays
  • 8 IR / Serial ports
  • 8 Digital I/O ports
  • 3 Communication Networks: AxLink, ICSNet and Ethernet (TCP/IP)
  • 4 NetLinx Control Card Expansion slots that support all NXC control cards
  • 404 MIPS processor speed
  • 64 MB RAM or 256 MB RAM
  • 2 GB CompactFlash (upgradeable to 4 GB)
  • 1 MB Non-Volatile Memory
  • AMX Device Discovery enabled
  • JITC Compliant

SPECIFICATIONS

DIMENSIONS (HWD)

  • 5 3/16" x 17" x 9 5/16" (13.2 cm x 43.2 cm x 23.7 cm)
  • RU: 3

WEIGHT
9.15 lbs (4.15 kg)

POWER
900 mA @ 12 VDC

ENCLOSURE
Metal with black matte finish

MEMORY

  • 64 MB SDRAM (FG2105-06)
  • 256 MB RAM (FG2105-26)
  • 1 MB of Non-volatile SRAM

COMPACT FLASH
2 GB Compact Flash (upgradeable to 4 GB factory programmed)

ONBOARD MASTER
404 MIPS

REGULATORY COMPLIANCE

  • FCC Part 15 Class B
  • CE EN 55022
  • CE EN 55024
  • CE EN 60950-1
  • IEC 60950
  • UL 60950-1

FRONT PANEL COMPONENTS

  • LINK/ACT: Green LED blinks when the Ethernet cables are connected and terminated correctly. Also blinks when receiving Ethernet data packets
  • Status: Green LED blinks to indicate that the system is programmed and communicating properly
  • Output: Red LED blinks when the Controller transmits data, sets channels, sends data strings, etc.
  • Input: Yellow LED blinks when the Controller receives data from button pushes, strings, commands, channel levels, etc.
  • RS-232/422/485 LEDs
  • Relay LEDs
  • IR/Serial LED
  • I/O LEDs
  • NetLinx Control Card Slot 1 - 4
  • Rack-mount brackets: Provides an installation option for the Integrated Controller to be mounted into an equipment rack, when used with the Installation Kit (KA2105-01)

REAR PANEL CONNECTORS

  • RS-232/422/485 (Ports 1 - 7)
  • ICSNet: Two RJ-45 connectors for ICSNet interface (included)
  • ICSHub Out: RJ-45 connector provides data to a Hub connected to the Controller (included)
  • Relay (Port 8)
  • Digital I/O (Port 17)
  • IR/Serial (Ports 9 - 16)
  • Program Port
  • Configuration DIP Switch: Sets the communication parameters for the Program port
  • ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device
  • Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
  • AxLink LED: Green LED indicates the state of the AxLink port
  • AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data and power to external control devices
  • Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector
  • CardFrame Number DIP Switch

ENVIRONMENTAL

  • Operating Temperature: 0° C (32° F) to 50° C (122° F)
  • Operating Humidity: 20% to 85% RH
  • Heat Dissipation (Typical): 36.9 BTU/hr

INCLUDED ACCESSORIES

  • 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
  • 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
  • 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)
  • Two 8-pin 3.5 mm mini-Phoenix (female) Relay connectors (41-5083)
  • Two CC-NIRC IR Emitters
  • Two removable rack ears (62-2105-07)



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.




(Click here for larger PDF image)

Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • AMX Essentials (Online)
  • Getting Started with AMX (Online)
  • Control Designer
  • Quest for Power (Online)
  • Control Installer
  • Control Programmer 1
  • Getting Started with AMX Modules (Online)
  • Control Programmer 2
  • Control Programmer 3
  • Introduction to Duet (Online)
  • Building Java Modules using Café Duet

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

NAME DESCRIPTION PART #
PSN6.5 6.5 A Power Supply (FG423-41)
PSN4.4 4.4 A Power Supply (FG423-45)
NXA-CF2NI CompactFlash Upgrade (FG21116-XX)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty