NI-700

NetLinx® Integrated Controller

DescriptionNetLinx Integrated Controller
Part #FG2105-70
2 | 0 | 1 | 4
Serial • Relay • IR • Digital I/O

WATCH THE VIDEO
Sometimes the best way to understand what a product is capable of is to see it in action, which you can do by linking directly to featured online videos, available below.


TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • AMX Essentials (Online)
  • Getting Started with AMX (Online)
  • Control Designer
  • Quest for Power (Online)
  • Control Installer
  • Control Programmer 1
  • Getting Started with AMX Modules (Online)
  • Control Programmer 2
  • Control Programmer 3
  • Introduction to Duet (Online)
  • Building Java Modules using Café Duet

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

AWARD WINNING PRODUCTS

2005 High Impact of the Year
CE Pro asked readers which products had the biggest impact on their businesses this year These were products that helped dealers save money, boost margins and increase sales. They were the 2005 CE Pro High Impact Products (CHIPs) of the year.

D-Tools Certified Product

This product can be found in the D-Tools manufacturer product database and specified as a third party device when building and proposing a system using D-Tools System Integrator software. D-Tools data includes attributes that make it easier to sell, design, and install systems including: overview, specifications, images, product documentation and more. AMX is a member of the D-Tools Manufacturer Vantage Point (MVP) program designed to provide D-Tools customers the most up-to-date product information.

Revit BIM

This product is part of the Autodesk Revit database and can be specified in designs for Building Information Modeling (BIM). Click here to download the associated Revit .rfa file from the Autodesk SEEK Web site. It is also searchable under 'AMX' in any Autodesk application."

COUNTRY OF ORIGIN: MEXICO

To satisfy the requirements/regulations of existing or future government programs, this two-letter code is being provided to designate the country of origin for this product.

(Click here for a list of all countries and their respective two-letter code.)

JITC TESTED

This product has been thoroughly tested for network security by the Joint Interoperability Test Command (JITC) division of the Defense Information Systems Agency (DISA) under Department of Defense (DoD) Directive 8500.01E, DoD Instruction 8500.2 and DISA Field Security Operation Security Technical Implementation Guides (STIG). It achieved a perfect score in the JITC IP Vulnerability testing with no High, Medium or Low impact findings.

Data SheetsManualsLiterature
A & E SpecificationsWhite PapersDrawingsFirmware FilesHot Fix FilesPhotos

NI-700 - Front
PNG | 2.0 MB

NI-700 - Front Left
PNG | 2.10 MB

NI-700 - Front Right
PNG | 2.07 MB

NI-700 - Rear
PNG | 1.83 MB

VideosRegulatory Compliance

OVERVIEW
The NI-700 unit is geared to meet the specific control and automation needs of a single room environment, in which both price and functionality are the driving requirements. The NI-700 is configured to control a limited number of video players, projectors, lights, thermostats, and other electronic equipment.

COMMON APPLICATION
Ideal for single-room environments with a limited number of devices such as classrooms, conference rooms, hotel rooms and other applications.

FEATURES

  • Ultra-fast 304 MIPS processor
  • 2 Configurable RS-232 / RS-422 / RS-485 Serial Ports
  • 1 IR/Serial Port
  • 1 IR Receiver Port
  • 4 Digital I/O Channels
  • 1 Ethernet 10/100 Port
  • 1 AxLink Connector
  • 64 MB RAM
  • 32 MB Flash Memory
  • 512 KB Non-Volatile Memory
  • AMX Device Discovery enabled
  • JITC Compliant

SPECIFICATIONS

DIMENSIONS (HWD)

  • 1 9/16" x 5 9/16" x 5 1/8" (4.01 cm x 14.10 cm x 13.00 cm)
  • RU: 1

WEIGHT
1.30 lbs (590 g)

POWER

  • 280 mA @ 12 VDC
  • Power requirements are usage dependant

ENCLOSURE
Metal with black matte finish

ONBOARD MASTER
304 MIPS

REGULATORY COMPLIANCE

  • FCC Part 15 Class B
  • CE EN 55022
  • CE EN 55024
  • CE EN 60950-1
  • IEC 60950
  • UL 60950-1

FRONT PANEL COMPONENTS

  • Program Port
  • Configuration DIP Switch: Sets the communication parameters for the Program port
  • IR RX LED: Red LED lights when IR data is being received via the rear IR RX port
  • IR LED: Red LED lights during the transmission of IR or Serial data via the rear IR port
  • I/O LEDs: Four yellow LEDs light when the rear I/O channels 1 - 4 are active. LED indicator for each I/O port reflects the state of that particular port
  • Serial LEDs
  • LINK/ACT: Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
  • Status: Green LED lights when the Controller is programmed and communicating properly
  • Output: Red LED lights when the Controller transmits data, sets channels sends data strings, etc.
  • Input: Yellow LED lights when the Controller receives data from button pushes, strings, commands, channel levels, etc.
  • ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device

REAR PANEL CONNECTORS

  • RS-232/422/485 (Ports 1 & 2)
  • IR RX (Port 5)
  • Digital I/O (Port 4)
  • IR/Serial (Port 3)
  • AxLink LED
  • AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector provides data and power to external control devices
  • Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
  • Power Port

ENVIRONMENTAL

  • Operating Temperature: 0° C (32° F) to 50° C (122° F)
  • Operating Humidity: 20% to 85% RH
  • Heat Dissipation (Typical): 11.5 BTU/hr

INCLUDED ACCESSORIES

  • 2-pin 3.5 mm mini-Phoenix female PWR connector (41-5025)
  • 4-pin 3.5 mm mini-Phoenix female connector (41-5047)
  • 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
  • CC-NIRC IR Emitter



Note: Specifications are subject to change. The most current and complete specifications for this product can always be found at AMX.com: AV for an IT World.




(Click here for larger PDF image)

Learn important installation, configuration and programming techniques in the following course(s) from AMX University:

  • AMX Essentials (Online)
  • Getting Started with AMX (Online)
  • Control Designer
  • Quest for Power (Online)
  • Control Installer
  • Control Programmer 1
  • Getting Started with AMX Modules (Online)
  • Control Programmer 2
  • Control Programmer 3
  • Introduction to Duet (Online)
  • Building Java Modules using Café Duet

For schedules and registration for these and any AMX University courses, visit www.amx.com/training.

NAME DESCRIPTION PART #
IRX-PP38 Plasma Proof IR Sensor (FG460)
PSR4.4 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector with Retention Screws (FG423-46)
PSN4.4 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector (Discontinued) (FG423-45)
PSN6.5 6.5 A Power Supply (FG423-41)
AC-RK Accessory Rack Kit (FG515)
AC-SMB Surface Mounting Bracket (FG525)
AC-PMB Pole Mounting Bracket (FG531)
CC-232 RS-232/422 Cables (FG10-752-04)
CC-NIRC IR Cables (FG10-000-11)
Feedback | Gear Store | Site Map | Terms of Use | Privacy Policy | Warranty