NMX-ATC-N4321-C Audio Transceiver Card
Ngừng sản xuất

Thẻ Phát/Nhận Audio qua IP

AMX_color_RGB

Sản phẩm thay thế


NMX-ATC-N4321 Audio Transceiver là một giải pháp audio-over-IP vừa gửi vừa nhận audio hai kênh cân bằng hoặc không cân bằng qua IP. Chỉ cần kết nối đầu vào audio cân bằng vào cổng IN và nó được chuyển đổi thành các gói IP có thể chuyển mạch và định tuyến giống như dữ liệu hoặc thoại. Đầu ra audio cân bằng nhận một luồng audio-over-IP và giải mã thành tín hiệu tương tự trong khi duy trì độ trung thực của âm thanh. Hoàn hảo cho truyền tải audio điểm-điểm hoặc điểm-đa điểm, NMX-ATC-N4321 cung cấp chuyển mạch và phân phối ma trận audio bằng các tùy chọn điều khiển giống như giải pháp chuyển mạch và phân phối video Networked AV của SVSI.

Với hai cổng Gigabit Ethernet tự động cảm nhận, các thiết bị có thể được xếp chồng để cung cấp audio đa kênh độ trễ thấp qua mạng nội bộ hoặc một mạng riêng biệt về mặt vật lý. Một cổng Ethernet hỗ trợ POE để sử dụng với công tắc POE, loại bỏ nhu cầu về nguồn điện bên ngoài. Một ma trận audio với bất kỳ số lượng đầu vào và đầu ra nào có thể được xây dựng bằng NMX-ATC-N4321. Vì điều khiển giống như ma trận video over IP của SVSI, các ma trận video và audio có thể được kết hợp và định tuyến bằng cùng một bộ điều khiển để phân phối đa phương tiện kỹ thuật số tối ưu.

Video

 

 

Tải xuống

Manuals
  Kích thước Đã tải lên
1 MB Thg 10 2020
200 KB Thg 10 2020
Software
  Phiên bản Kích thước Đã tải lên
MacOS download icon SVSI N-Able Mac
phiên bản 5.2.2, phát hành: Thg 4 2025
5.2.2   200 MB Thg 4 2025
download icon for SVSI SNMP MIB SVSI SNMP MIB
phát hành: Thg 7 2020
  10 KB Thg 7 2020
Windows download icon SVSI N-Able PC
phiên bản 5.2.2, phát hành: Thg 4 2025
5.2.2   100 MB Thg 4 2025
Firmware
  Phiên bản Kích thước Đã tải lên
download icon for SVSI N4000 Audio over IP Transceiver Firmware Updater SVSI N4000 Audio over IP Transceiver Firmware Updater
phiên bản 1.0.4, phát hành: Thg 11 2021
1.0.4   60 MB Thg 11 2021
Data Sheets
  Kích thước Đã tải lên
500 KB Thg 10 2020
Quick Start Guides
  Kích thước Đã tải lên
600 KB Thg 10 2020
Product Guides
  Phiên bản Kích thước Đã tải lên
file type icon NET-SVSI-MIB.txt
cập nhật: Thg 8 2021
  90 KB Thg 8 2021
file type icon N-Series Stream Compatibility
cập nhật: Thg 6 2024
  400 KB Thg 6 2024
file type icon Product Guide - N-Series Minimum Network Requirement
phiên bản D, cập nhật: Thg 10 2025
200 KB Thg 10 2025
Install Guides
  Kích thước Đã tải lên
1 MB Thg 6 2024

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Thông số kỹ thuật

Audio
  • Input: 2-channel user selectable balanced or unbalanced audio.
  • Output
    • 2-channel balanced audio (1x 5-pin phoenix connector)
    • 2-channel unbalanced audio (headphone jack)
  • Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz
  • Phantom Power: 48V on each of the input audio pins (L+, L-, R+, R-), 7mA per pin, or 14mA per channel
Latency Audio: 20ms (excluding network propagation)
Communications Ethernet: Multi-cast, unicast, IGMP v3, IPv6, layer-2 and layer-3 switch compatible.
Ports
  • +12V 2A: One 12 Volt DC power input
  • P0 POE
    • 8-wire RJ45 female
    • 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port. Provides both the network connection and the power to the Encoders and Decoders
  • P1
    • 8-wire RJ45 female
    • 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  • GPI: General purpose input
  • RELAY: 2-channel relay port
  • AUDIO IN: 5-pin terminal Phoenix connector which provides user-selectable balanced/ unbalanced input. Dedicated audio input.
  • AUDIO OUT: 5-pin terminal Phoenix connector which provides user-selectable balanced audio output. Dedicated audio output.
  • HEADPHONE JACK: 2-channel, unbalanced audio output
Controls and Indicators - Front Panel
  • RESET button: Recessed pushbutton. Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings.
  • ID button: Recessed pushbutton. Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command).
  • POWER LED: On solid (green) when operating power is supplied (via PoE or local power supply). This activity is also shown by the PWR LED on the rear panel.
  • STATUS LED: On flashing (green) when there is software activity. This activity is also shown by the STAT LED on the rear panel.
Controls and Indicators - Rear Panel
  • PWR LED: Same as POWER LED described above.
  • DVI LED: On (green) when a DVI input connection exists
  • STAT LED: Same as STATUS LED described above.
  • STRM LED: On (green) when the unit is streaming video
General
  • Regulatory Compliance: FCC, CE, and NTRL
  • Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
FG Numbers FGN4321-CD

NMX-ATC-N4321-C Audio Transceiver Card
Ngừng sản xuất

Thẻ Phát/Nhận Audio qua IP