Solecis Digital Switcher Firmware v1.4.4

Note: this is an old version. The current version is: Solecis Digital Switcher Firmware v1.4.9. ×

Last Updated: 3月15日

Prerequisites:

  • For directly connected DXLink Receivers, the DXLink Receiver must use DXLINK-HDMI-RX firmware version v1.9.21 (or later).
  • For connecting to Enova DGX enclosures over DXLink, the Enova DGX will need the following FW versions:
    • For Enova DGXs with NX Masters: Enova DGX NX Master FW v1.2.312 (or later)
    • For Enova DGXs with NI Masters: Enova DGX 8/16/32 NI Master FW v4.2.395 (or later)
    • Enova DGX 8/16/32/64 FW v2.0.0.12 (or later)
  • Enova DVX 3x55 and 2x55 version enclosures will need DVX-3x5x/2x5x Switcher Firmware v1.6.31 (or later)
  • To allow communication/control from the DVX2x55 or DVX3x55 to the DXLink TX device, Ethernet on the DXLink Input(s) may need to be enabled. A DXLINK_IN_ETH-AUTO command may need to be sent to the DVX. Reference the DVX Operation Reference Guide for details.
  • NetLinx Studio V3.4 (4.0 if using NX master)

 

Features added in this release:

  • DIP4 for setting DIRECT mode

 

Fixes in this release:

  • case insensitive arguments for EXTERNAL_BUTTON_ACTION