AMX PDXL-2

큰 이미지

대체 제품

PS-POE-AT-TC

고전력 PoE 인젝터, 802.3AT 준수

The PDXL-2 is a Power over DXLink injector which allows for remote powering of any two DXLink devices by "injecting" power through the twisted pair cable. The PDXL-2 also accepts I/O control from a NetLinx controller allowing power down capabilities to either (or both) of the connected DXLink devices to achieve power savings when they are not in use.

The PDXL-2 Dual Power over DXLINK Controller provides the ability to power a point-to-point DXLink Transmitter to DXLink Receiver without the need for an AC outlet in proximity to the location of the DXLink devices. When used with a NetLinx controller, the PDXL-2 can power down the DXLink devices as part of a standby mode for an entire room to reduce energy usage.

다운로드

CAD Drawings

	크기	업로드 날짜
Pictorial Drawing - Dual Power over DXLink Controller (PDF) 업데이트: 2018년 7월	152KB	2018년 7월
Pictorial Drawing - Dual Power over DXLink Controller (DXF) 업데이트: 2018년 7월	845KB	2018년 7월
Pictorial Drawing - Dual Power over DXLink Controller (DWG) 업데이트: 2018년 7월	240KB	2018년 7월

BIM Objects

	크기	업로드 날짜
PDXL-2 - BIM Object 업데이트: 2019년 8월		2019년 8월

Data Sheets

	크기	업로드 날짜
PDXL-2 Dual Power over DXLink Controller 업데이트: 2018년 7월	353KB	2018년 7월

Quick Start Guides

	버전	크기	업로드 날짜
Quick Start Guide - PDXL-2 Dual Power over DXLink Controller 버전 D, 업데이트: 2018년 7월	D	316KB	2018년 7월

위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하세요.

사양

Dimensions (HWD)	1 7/16" x 7" x 6 13/16" (36.3 mm x 177.8 mm x 172.4 mm)
Weight	2.25 lbs (1.02 kg)
Power Requirements	Power Connector: (1) 100-240V, 50/60 Hz, 1.6 A Power Consumption: Maximum Current Draw: 1.0 A Typical Current Draw: 0.35 A Note: Power consumption varies based on the number and type of powered devices
Environmental	Temperature (Operating): 32° to 104° F (0° to 40° C) Temperature (Storage): –4º to 158ºF (–20º to 70ºC) Humidity (Operating): 90%, Non-condensing (maximum) Humidity (Storage): 95%, Non-condensing (maximum) Operating Altitude: –1000 to 10,000 ft. (–304.8 to 3048 m)
DXLink	DXLink Ports: (2) sets of 2 RJ-45 LAN connectors Transport Layer Throughput: 10.2 Gbps pass thru Power over DXLink Output: (per output) Pin Assignment & Polarity 4/5 (+), 7/8 (–) Output Power Voltage 55 VDC Output Power 30 Watts (guaranteed)
Controls	Relay Connection Type: (1) 4-pin 3.5 mm (female) captive-wire connectors GND Relay Port2 Relay Port1 +12V Relay Description: NetLinx Ports 1 & 2 Channels 1-2 Each relay can switch up to 24 VDC or 28 VAC @ 1 A Each relay is independently controlled Relays: 2 Note: Connecting the PDXL-2 to the I/O port on the NetLinx Central Controller enables you to power off devices
Indicators	(2) LEDs (1 for each DXLink Powered Output) Yellow (On): power is on and active Green (On): A remote terminal is connected
General	Front Components AC Power Indicator Channel Power Indicator Back Components DXLink Ports Power Connector Certifications FCC Part 15 Class A CE EN 55022 Class A CE EN 55024 CE EN 60950-1 IEC 60950-1 C-Tick CISPR 22 Class A UL 60950-1 Mounting Options Compatible with all V Style versatile mounting options including rack, surface or pole Compatible AMX Products DXLink HDMI Transmitter Module DXLink Multi-Format Transmitter Module DXLink Multi-Format Decor Style Wallplate Transmitters (US) DXLink Multi-Format Wallplate Transmitters DXLink HDMI Receiver Module
Certification	PDXL-2 IECEE CB Test Certificate PDXL-2 CE Declaration of Conformity PDXL-2 UL Certificate of Compliance
FG Numbers	FG1090-170