Solecis 4K Digital Switcher Firmware v2.1.35

Last Updated: 3月12日

----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------

- Directly connected DX-RX must use v1.13.34 (or later).

- Directly connected DX-RX-4K must use v2.2.21 (or later).

- Enova DGX 800/1600/3200/6400 must have v3.2.19 (or later)

- The DGX 100 Series Master FW should be v1.4.90 (or later)

- The DVX Switcher Series FW should be v1.6.76 (or later)

- NetLinx Studio v4.3.1519 (or later)

----------------------------------------------------------
2. Features added in this release:
----------------------------------------------------------
- Initial Release of the Solecis 4K Digital Switchers

----------------------------------------------------------
3. Fixes in this release: 
----------------------------------------------------------
- Fixes an issue where a 4k source will not work with a 
  2k sink connected to the HDMI output

----------------------------------------------------------
4. Known Issues
----------------------------------------------------------
- ICSLAN ports are not disabled when dipswitch 1 is OFF and
  the TX is connected to a DGX.

----------------------------------------------------------
5. Programming Information
----------------------------------------------------------


----------------------------------------------------------
6. Notable Points
----------------------------------------------------------
- Please read the documentation in regard to the DIP
  switches located on the front or rear of the SDX unit
  before attempting to connect to the network.

 

Previous Versions


相关产品

  • Sdx 414 dx thumb

    SDX-414-DX

     配备 DXLink™ 输出的 Solecis® 4x1 4K HDMI 数字切换器

  • Sdx 514m dx thumb

    SDX-514M-DX

     配备 DXLink™ 输出的 Solecis® 5x1 4K 多格式数字切换器


Previous Versions