Solecis 4K Digital Switcher Firmware v2.1.35

Last Updated: Mar 12, 2018

----------------------------------------------------------
1. Prerequisites
----------------------------------------------------------

- Directly connected DX-RX must use v1.13.34 (or later).

- Directly connected DX-RX-4K must use v2.2.21 (or later).

- Enova DGX 800/1600/3200/6400 must have v3.2.19 (or later)

- The DGX 100 Series Master FW should be v1.4.90 (or later)

- The DVX Switcher Series FW should be v1.6.76 (or later)

- NetLinx Studio v4.3.1519 (or later)

----------------------------------------------------------
2. Features added in this release:
----------------------------------------------------------
- Initial Release of the Solecis 4K Digital Switchers

----------------------------------------------------------
3. Fixes in this release: 
----------------------------------------------------------
- Fixes an issue where a 4k source will not work with a 
  2k sink connected to the HDMI output

----------------------------------------------------------
4. Known Issues
----------------------------------------------------------
- ICSLAN ports are not disabled when dipswitch 1 is OFF and
  the TX is connected to a DGX.

----------------------------------------------------------
5. Programming Information
----------------------------------------------------------


----------------------------------------------------------
6. Notable Points
----------------------------------------------------------
- Please read the documentation in regard to the DIP
  switches located on the front or rear of the SDX unit
  before attempting to connect to the network.

 

Previous Versions


Related Products

  • SDX-414-DX

    Solecis® 4x1 4K HDMI Digital Switcher with DXLink™ Output
  • SDX-514M-DX

    Solecis® 5x1 4K Multi-Format Digital Switcher with DXLink™ Output

Previous Versions