DXLink HDMI Fiber Receiver는 내장된 SmartScale® 기술로 각 연결된 디스플레이에 자동으로 완벽하게 스케일링된 HDCP 지원 HDMI를 제공하여, 소스와 디스플레이의 최적 해상도가 다를 때 발생할 수 있는 통합 문제를 해결합니다. 최대 10km 거리의 단일 모드 광섬유를 통해 오디오 및 비디오를 수신합니다. 로우 프로파일 DXLink Fiber Receiver는 디스플레이 뒤 또는 천장 마운트 프로젝터 위에 설치할 수 있습니다.
더 큰 이미지
대체 제품
-
DXFP-RX-4K60
DXLink 4K60 HDMI 파이버 리시버 모듈
상세 정보
The ideal solution for any destination display or projector designed into an Enova DGX integrated system that requires the distance capabilities and inherent security of fiber – or both; including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas and museums. Directly connect LCDs, plasmas and projectors using the HDMI output connection while delivering room audio via the stereo audio output.
다운로드
문서
| 크기 | |
Data Sheet
업데이트됨: 2026년 4월월
|
557KB |
Manuals
| 크기 | |
|
|
156KB |
|
|
46.4KB |
|
|
3.9MB |
BIM Objects
| 크기 | |
|
|
Firmware
| 크기 | |
|
|
1.4MB |
Quick Start Guides
| 크기 | |
|
|
665KB |
Whitepapers
| 크기 | |
|
|
484KB |
위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하십시오.
기능
- HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 10 Km (over 6 miles)
- Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps
- SmartScale® Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
- Secure and Isolated – Fiber inherently provides extra security and electrical isolation making it the transport method of choice for many mission-critical secure environments
- Field Serviceable Fiber Modules – Easily remove and replace SFP modules in the field
*See Duplex models for bidirectional control over fiber. Simplex models do not support control transport over fiber (such as Ethernet, USB, IR, Serial Control or EDID); although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX Digital Media Switchers" for details.
사양
| Dimensions (HWD) | 1" x 8 3/4" x 5 1/5" (2.54 x 22.12 cm x 13.08 cm) |
| DxLink Fiber | Fiber Connector: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); Fiber Cable Type: 9/125µm; Fiber Cable Length: 10 km (6.21 miles) |
| USB (HID) | (1) USB Mini A/B Connector ("DEVICE") |
| Front Connectors | Advanced Configuration Interface: (1) USB Mini-B Connector ("PROGRAM") |
| Back Connectors | Local Power: 2.1 mm DC Power Jack; DXLink Fiber Input: LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A); ICS LAN/Ethernet Port: (1) RJ-45 Connector |
| HDMI | Compatible Formats: HDMI, HDCP, DVI |
| HDMI Resolution Support | Progressive Resolution Support: All progressive resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display's preferred DID Detailed Timing Definition; Interlaced Resolution Support: 480i, 576i, 1080i |
| HDMI Audio Support | Audio Format Support: Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM, Dolby Digital and DTS support up to 48kHz, 5.1 channels; Audio Resolution: 16 bit to 24 bit |
| HDCP | HDCP Support: Yes |
| Stereo Audio | Output Connections: 3.5mm Mini-Stereo Jack; Output Signal Types: Stereo Analog |
| Power Supply | External, Included: Each HDMI RX ships with a desktop power supply with power cord, 2.5 A @ 12 V, Max 13.5 V |
| Compatible AMX Products | Enova DGX 800/1600/3200/6400 Digital Media Switchers with Single Mode Fiber Output Board installed including DGX-O-DXF-SMS or DGX-O-DXF-SMD; Direct point-to-point connection with a Single Mode Fiber Transmitter including DXF-TX-SMS or DXF-TX-SMD |
| FG Numbers | FG1010-561 |
컨설턴트 지원NOTE: The most current and complete specifications for this product are found in the data sheet. Specifications are subject to change.