AMX PS-POE-AT-TC

큰 이미지

With the high power PS-POE-AT-TC Injector, transmit both power and data through a single cable to a remotely located Power-over-Ethernet (PoE) touch panel. Required for use with the MVP-9000i and DXLink Twisted Pair Transmitters and Receivers, it is also compatible with the MXT-1000, MXD-1000, MXT-700, MXD-700 and MXD-430. This self-contained single-port PoE gigabit power supply "injects" DC power and data into the same twisted pair cable at a distance of up to 100 meters (328 feet).

더 알아보기

The PS-POE-AT-TC PoE Injector sends power and data on demand to wall or table docking stations of compatible touch panels via a single Ethernet connection.

다운로드

CAD Drawings

	크기	업로드 날짜
Pictorial Drawing - PS-POE-AT-TC High-Power 802.3at Compliant PoE Injector (PDF) 업데이트: 2018년 7월	144KB	2018년 7월
Pictorial Drawing - PS-POE-AT-TC High-Power 802.3at Compliant PoE Injector (DXF) 업데이트: 2018년 7월	248KB	2018년 7월
Pictorial Drawing - PS-POE-AT-TC High-Power 802.3at Compliant PoE Injector (DWG) 업데이트: 2018년 7월	99KB	2018년 7월

BIM Objects

	크기	업로드 날짜
PS-POE-AT-TC - BIM Object 업데이트: 2019년 8월		2019년 8월

Quick Start Guides

	버전	크기	업로드 날짜
Quick Start Guide - PS-POE-AT-TC High-Power 802.3at Compliant PoE Injector 버전 D, 업데이트: 2018년 7월	D	123KB	2018년 7월

위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하세요.

특징

10/100/1000 (MbPS) Data Rates
Meets IEEE802.3at requirements
Load Diagnostic LED
100/240 VAC Universal Input

사양

Dimensions (HWD)	5 1/2" x 2 1/8" x 1 1/4" (14 cm x 5.3 cm x 3.25 cm)
Weight	.44 lbs (200 g)
Environmental	Temperature (Operating): -4°F to 104°F (-20°C to 40°C) @ 30W -4°F to 131°F (-20°C to 55°C) @ 22.5W Temperature (Storage): -4°F to +158°F (-20°C to +70°C) Relative Humidity (Operating): Maximum 90%, Non-Condensing Thermal Rating: 20 BTU/hr (@240VAC) Operating Altitude: -1000 to 10,000 ft. (-304.8 to 3048 m)
General	LEDs: Yellow (On): power is on and active Green (On): A remote terminal is connected Green (Blinking): Overload state or short circuit Enclosure: Molded black matte plastic Cord and Connectors: Dual shielded RJ45 jacks built into the enclosure, EIA 568A and 568B Approvals: IEEE 802.3at (PoE) RoHS / WEEE compliant CE FCC Part 15, Class B EN 55022 Class B (Emissions) EN 55024 (Immunity) VCCI (Japan) C-Tick UL/cUL per IEC 60950-1 GS Mark per IEC 60950-1
Input	LEDs: Yellow (On): power is on and active Green (On): A remote terminal is connected Green (Blinking): Overload state or short circuit Enclosure: Molded black matte plastic Cord and Connectors: Dual shielded RJ45 jacks built into the enclosure, EIA 568A and 568B Approvals: IEEE 802.3at (PoE) RoHS / WEEE compliant CE FCC Part 15, Class B EN 55022 Class B (Emissions) EN 55024 (Immunity) VCCI (Japan) C-Tick UL/cUL per IEC 60950-1 GS Mark per IEC 60950-1
Output	Pass Through Data Rates: 10/100/1000 Mbps Output Voltage: 55 VDC Nominal Output Power: 30 Watts (Guaranteed) Output Current: 0.6A (max) Ripple and Noise: Below the IEEE802.3af requirements f<500Hz: Vp-p 0.5 500Hz to 150kKHz: Vp-p 0.2 150KHz to 500KHz: Vp-p 0.15 500KHz to 1MHz: Vp-p 0.1 Transient Response: Meets IEC61000-4-4 (1Kv) DXLink Transport Layer Throughput: 10.2 Gbps pass thru (only applicable to DXLink signals)
Compatible AMX Products	DX-TX, DXLink™ Multi-Format Transmitter Module (FG1010-310) DX-TX-DWP, DXLink Multi-Format Decor Style Wallplate Transmitters (US) (FG1010-325-BL/-WH) DX-TX-WP, DXLink Multi-Format Wallplate Transmitters (FG1010-320-BL/WH) DX-RX, DXLink HDMI Receiver Module (FG1010-500) MVP-9000i, 9” Modero® ViewPoint® Touch Panel with Intercom (FG5967-01/02)
FG Numbers	FG423-84