Modero MVP-9000i Touch Panel Firmware v2.86.77

Note: this is an old version. The current version is: Modero MVP-9000i Touch Panel Firmware v2.86.86. ×

Last Updated: Mar 16

Order updated FCC label - no charge

Changes in this release:
Fixed issue with the flyout buttons on the left side of the front panel. The panel will appear to stall and possibly revert to the main startup page if any of the four flyout buttons are pressed after a bootup but before the capacitive touch pad on the right side of the front panel is pressed.

PROGRAMMING INFORMATION:

After upgrading you MUST resave wireless settings. You do not have to reenter the settings. Open wireless page and press save.

Band Selection: Note - The band selection will effect what you see when doing a site survey.

802.11a/b/g -> A and B bands, all channels
802.11b/g -> B band, channels 1,6,11
802.11a -> A band, all channels

Active roaming:
Disabled -> Roaming is passive, and will only occur when the panel loses connection to its current access point Enabled -> The panel is actively looking for better access points to roam to.

 


Related Products

  • MVP-9000i

    MVP-9000i

    9" Modero® ViewPoint® Touch Panel with Intercom