Last Updated: Sep 12
Product Name: NX-1200, NX-2200, NX-3200, NX-4200 Master Controllers
Enova DVX-x2xx
Enova DGX 8/16/32/64
Massio Control Pads MCP-10x
Enova DGX 800/1600/3200/6400
DVXC DVX-2265/3266
FG #: FG2106-01, FG2106-02, FG2106-03, FG2106-04,
FG1901-16,
FG1906-07, FG1906-09, FG1906-11,
FG1906-12, FG1906-13, FG1906-14, FG1906-15,
FG1906-16, FG1906-17, FG1906-18, FG1906-22,
FG1060-08, FG1060-16, FG1060-32, FG1060-64,
FG2102-06L-B, FG2102-06L-W, FG2102-06P-B,
FG2102-06P-W, FG2102-08-B, FG2102-08-W
FG1061-08, FG1061-16, FG1061-32, FG1061-64
FG1906-0201, FG1906-0202, FG1906-0401, FG1906-0402
Current Firmware Version: 1.8.190
Release Date: 5/15/2024
Device ID: 0x018C, 0x1B5, 0x1B1, 0x01B2, 0x1B8, 0x1E9, 0x0214
----------------------------------------------------------
Prerequisites
----------------------------------------------------------
When upgrading from 1.3.106 or earlier, you must first upgrade to 1.4.90.
----------------------------------------------------------
Programming Information
----------------------------------------------------------
Use of these new Authentication keywords requires Netlinx.axi v1.62.
The NetLinx language supports the following new Authentication keywords:
TLS_CLIENT_CLOSE
TLS_CLIENT_OPEN
For details on the new keywords, please see the NetLinx Language Reference Guide.
----------------------------------------------------------
Changes in this release
----------------------------------------------------------
- Fixed boot issue in manufacturing when using blank MSOM with 1.8.x firmware
v1.8.187
- Added Telnet support for upper case ICSP commands: SEND_STRING, SEND STRING, SEND_LEVEL, SEND LEVEL, SEND_COMMAND, SEND COMMAND
v1.8.186
- Fixed ICSP TLS issue connections with Controller-to-Controller and Controller-to-Panel scenarios
v1.8.184
- upgrade TLSv1_2 to TLSv1_3
v1.8.183 (Release)
- Added support for new DXLink 4K60 DWP TX in Webgui of DGX and DVX4k
- Improved boot time to be faster (except for High Security Mode which takes a few minutes longer due
to security key creation and authentication)
- Fixed issue with telnet URL list commands causing telnet session to lock up when deleting URL item
- Fixed static ip gateway persistence issue during upgrade from 1.6.x to 1.8.x firmware
- Fixed telnet Master to Master issue
See v1.8.183 Readme for earlier version history
----------------------------------------------------------
Known Issues
----------------------------------------------------------
- If upgrading from 1.6 firmware, wpa_supplicant updates will need to be re-done
- The following RMS SDKs are not compatible with 1.5.68 and higher:
RMS SDK 4.0-4.3.26, RMS SDK 4.4.* and RMS SDK 4.5.*
- When changing between the local and remote directories for user authentication,
the master requires a reboot to force all currently logged in users to
re-authenticate with the new service.
- SSH Key algorithm supports only ssh-rsa host key.
- ICSPMon will not work with port authentication on or telnet disabled.
- The USB host ports do not support USB hubs.
- Performing a PING to the NX master's IPv6 address may cause the NX master to reboot.
- Master web page login may get stuck in MS-IE browser on Windows8. Either use a
different browser or in Internet Options->Advanced->Security Settings check
"Enable Enhanced Protection Mode*" (Windows8 restart required).
- Dynamic images and listview features require v.1.4.9 G5 touch panel firmware if NX security is enabled.
- Dynamic images will not work with G4 touch panels with NX security enabled.
- IP_MC_SERVER_OPEN command does not work on the ICSLan port.
- The DVX-x2xx Switcher (5002) requires firmware v1.7.54 or higher if authentication is enabled for AMX devices
on ICSLAN or LAN Ports.
- The DGX Switcher (5002) requires firmware v3.2.10 or higher if authentication is enabled for AMX devices
on ICSLAN or LAN Ports.
download
