Keypads with Ethernet Firmware v1.2.14

Last Updated: Mar 15, 2018

Prerequisites:
NetLinx Studio V4.1.1251 (or later) recommended

Features added in this release:

  • ICSP Connection: Improved ICSP connection times when booting up or changing ICSP configuration
  • Auto-recovery: Created a robust auto-recovery mechanism for error conditions, such as the physical disturbance of the ribbon cable in a expansion keypad (MET-7X or MET-13X)
  • LEVON/RXON Support: Added enforcement for 'LEVON' and 'RXON' send commands. If LEVON is not received by the keypad, level events will not be reported. Similarly, if RXON is not received by the keypad, strings will not be reported.
  • Keypad Query: Added "info" telnet command to provide at-a-glance information about the keypad, including any expansion keypads that are attached.
  • Expansion Keypad Query: Added new "?Expansion" query to allow Netlinx code to query for any attached expansion keypads.

 

Query syntax:
"'?Expansion'"

Example:
SEND_COMMAND Panel,"'?Expansion'"

Response syntax:
"Expansion-<index>,<count>,<port>,<type>,<description>"

Variables:
Index = response index, starting with 1
Count = total number of response strings (i.e. max # of expansion keypads allowed, currently 2)
Port = Port associated with the expansion keypad
Type = Expansion keypad type (either MET-7X or MET-13X)
Description = Product description - current values below:

Type Description
MET-7X Metreau 7-Button Expansion Keypad
MET-13X Metreau 13-Button Expansion Keypad

Example Response Strings when a single expansion keypad is present:
"Expansion.Device-1,2,2,MET-7X,Metreau 7-Button Expansion Keypad"
"Expansion.Device-2,2,3,NONE,NONE"

NOTE: 2 response strings will be sent to the master for any keypad that supports expansion keypads (i.e. MET-6NE, MET-7E, MET-13E), even if none are present.
The query is ignored for any products that don't support expansion keypads.

Fixes in this release:

  • IR Port Numbering Consistency: The MET-6NE provides IR Receiver functionality always on Port 4, regardless whether 0, 1, or 2 expansion keypads are connected. Ports 1 and 4 are always present, but ports 2 and 3 are only present for expansion keypads
  • Refined Telnet Logs: Improved telnet logging readability, including eliminating redundant timestamps

Known Issues:
Expansion keypad cable: Handling ribbon cable of expansion keypads will cause temporary downtime before unit auto-recovers (no need for any subsequent power cycle).

Previous Versions


Related Products

  • MET-13E

    Metreau® 13-Button Ethernet Keypad
  • MET-13X

    Metreau® 13-Button Ethernet Expansion Keypad
  • MET-6NE

    Metreau® 6-Button Ethernet Keypad with Navigation
  • MET-7E

    Metreau® 7-Button Ethernet Keypad
  • MET-7X

    Metreau® 7-Button Ethernet Expansion Keypad
  • MKP-106

    6-Button Massio™ Keypad (US, UK, EU)
  • MKP-108

    8-Button Massio™ Keypad with Knob (US, UK, EU)
  • SP-08-E-US

    8-Button KeyPad (US) with Ethernet

Previous Versions